Gauging interest 04 RX8 Show car Titanium Gray
#1
lurking
Thread Starter
Join Date: Jan 2008
Location: Burleson,TX
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
*PRICE DROP* 2004 Custom TI Grey RX-8
Well I cannot believe I am doing this but I am thinking about selling her if the price is right? My motor in my Trans AM bent a pushrod and I am going to build a new one so I could use the cash. I also am going to purchase some property in the future. I do not have to sale immediately this is a gauging interest thread.
04 Mazda RX-8 Titanium Gray
50kmiles
Borla exhaust, Overdrive pulleys, Typhoon intake, K&N
2 JL Audio 10's with pioneer amp
Full Mazdaspeed body kit DONE RIGHT!
18' SSR rims
new tires on rear
Interior is full carbon fiber professionally done.
This car won 2nd place in show at Seven Stock7
I would take $15,800 for it now and I am firm on my price.
There is only 1 thing wrong with this car there is a small chip on front spoiler where a damn cap off of a water truck came off and hit it. Any body shop could fix easily I will get pics of it soon up so you can see.
Oh there is another problem if you are married your wife won't let you go anywhere in it without her
04 Mazda RX-8 Titanium Gray
50kmiles
Borla exhaust, Overdrive pulleys, Typhoon intake, K&N
2 JL Audio 10's with pioneer amp
Full Mazdaspeed body kit DONE RIGHT!
18' SSR rims
new tires on rear
Interior is full carbon fiber professionally done.
This car won 2nd place in show at Seven Stock7
I would take $15,800 for it now and I am firm on my price.
There is only 1 thing wrong with this car there is a small chip on front spoiler where a damn cap off of a water truck came off and hit it. Any body shop could fix easily I will get pics of it soon up so you can see.
Oh there is another problem if you are married your wife won't let you go anywhere in it without her
Last edited by lycan 13; 05-26-2009 at 11:21 AM. Reason: Price DROP
#2
lurking
Thread Starter
Join Date: Jan 2008
Location: Burleson,TX
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
84 Views nobody has anything to say???
Soon as the weather gets nice I will get more detailed pics up and pics of the trophy and awards.
I really think my price is good considering KBB is 16k and there is 10g's worth of appearance mods and performance. I have receipts. Then again I am in no hurry to sale right now.
I really think my price is good considering KBB is 16k and there is 10g's worth of appearance mods and performance. I have receipts. Then again I am in no hurry to sale right now.
#4
lurking
Thread Starter
Join Date: Jan 2008
Location: Burleson,TX
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Holy Bumpin resurection Batman
Car is up for sale again I did not really wanna sale it b4 but now I would I am going to start a business and one of the toys has to go bye bye I wanna put everything I got into it. The only thing thats has changed is it now has 50k miles on it and i am dropping the price to $17,500 the car still runs flawlessly.
Like said before the only thing wrong with it is a small chip in front spoiler and a lil door ding on driver side both very minor and I am a meticulate A HOLE
Like said before the only thing wrong with it is a small chip in front spoiler and a lil door ding on driver side both very minor and I am a meticulate A HOLE
#5
lurking
Thread Starter
Join Date: Jan 2008
Location: Burleson,TX
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Car is up for sale again I did not really wanna sale it b4 but now I would I am going to start a business and one of the toys has to go bye bye I wanna put everything I got into it. The only thing thats has changed is it now has 50k miles on it and i am dropping the price to $17,500 the car still runs flawlessly.
Like said before the only thing wrong with it is a small chip in front spoiler and a lil door ding on driver side both very minor and I am a meticulate A HOLE
Like said before the only thing wrong with it is a small chip in front spoiler and a lil door ding on driver side both very minor and I am a meticulate A HOLE
I think the price is good considering the work put into the car and comparing it to other rx8's for sale
#8
lurking
Thread Starter
Join Date: Jan 2008
Location: Burleson,TX
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
#9
lurking
Thread Starter
Join Date: Jan 2008
Location: Burleson,TX
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Well i figured since i got over 10 grande in receipts on the car and KBB value I beleive is 14k it was pretty reasonable.
#12
Soon as the weather gets nice I will get more detailed pics up and pics of the trophy and awards.
I really think my price is good considering KBB is 16k and there is 10g's worth of appearance mods and performance. I have receipts. Then again I am in no hurry to sale right now.
I really think my price is good considering KBB is 16k and there is 10g's worth of appearance mods and performance. I have receipts. Then again I am in no hurry to sale right now.
Better part out and you can get more money
but I would wonder where's that 10G goes ?
Here is my 10G list....well...I think I actually spent less than 10G??
Exterior:
Mazdaspeed side skirt
Mazdaspeed Spoiler
Mazda OEM F&R Aero Kit
Seibon Carbon Fiber Hood
8000K HID headlight
3000K HID fog light
JDM white side markers
Polished Aluminum?Fender Strakes
Aluminum - Front&Rear ROTARY ACCENT
Mazdaspeed F&R license plates
Engine/ Power mod:
SR Motorsports complete pulley kit
Mazdaspeed Cold Air Intake
Borla cat back exhaust system
Custom on/off fan control
15W50 MOTUL racing oil
Mazdaspeed oil cap
Greddy radiator cap
Wheels/Tires/Breaks
4xEnkei RP-F1 18x8.0
4x 235 40 18 Federal 595RS-R
Porterfield Front Racing brake pads (Track Use)
EBC Front bake pads (Yellow)(street use)
EBC Rear brake pads (Red)
EBC F&R Brake Rotors
Stoptech Stainless Brake lines
MOTUL DOT 4 racing brake oil
Suspension
4x Megan Coilovers
Mazdaspeed Front carbon fiber strut bar
Mazdaspeed Rear strut bar
Tanabe Front Sway bar 30.4mm
Tanabe Rear Sway bar 20.4mm
4 pieces under car brace
Interior:
Sparco Spirit bucket seat
Custom low position bracket
All LED light bulbs
Aluminum PEDALS
Mazdaspeed Shift ****
#13
lurking
Thread Starter
Join Date: Jan 2008
Location: Burleson,TX
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Very nice looking car, good luck with the sale
Better part out and you can get more money
but I would wonder where's that 10G goes ?
Here is my 10G list....well...I think I actually spent less than 10G??
Exterior:
Mazdaspeed side skirt
Mazdaspeed Spoiler
Mazda OEM F&R Aero Kit
Seibon Carbon Fiber Hood
8000K HID headlight
3000K HID fog light
JDM white side markers
Polished Aluminum?Fender Strakes
Aluminum - Front&Rear ROTARY ACCENT
Mazdaspeed F&R license plates
Engine/ Power mod:
SR Motorsports complete pulley kit
Mazdaspeed Cold Air Intake
Borla cat back exhaust system
Custom on/off fan control
15W50 MOTUL racing oil
Mazdaspeed oil cap
Greddy radiator cap
Wheels/Tires/Breaks
4xEnkei RP-F1 18x8.0
4x 235 40 18 Federal 595RS-R
Porterfield Front Racing brake pads (Track Use)
EBC Front bake pads (Yellow)(street use)
EBC Rear brake pads (Red)
EBC F&R Brake Rotors
Stoptech Stainless Brake lines
MOTUL DOT 4 racing brake oil
Suspension
4x Megan Coilovers
Mazdaspeed Front carbon fiber strut bar
Mazdaspeed Rear strut bar
Tanabe Front Sway bar 30.4mm
Tanabe Rear Sway bar 20.4mm
4 pieces under car brace
Interior:
Sparco Spirit bucket seat
Custom low position bracket
All LED light bulbs
Aluminum PEDALS
Mazdaspeed Shift ****
Better part out and you can get more money
but I would wonder where's that 10G goes ?
Here is my 10G list....well...I think I actually spent less than 10G??
Exterior:
Mazdaspeed side skirt
Mazdaspeed Spoiler
Mazda OEM F&R Aero Kit
Seibon Carbon Fiber Hood
8000K HID headlight
3000K HID fog light
JDM white side markers
Polished Aluminum?Fender Strakes
Aluminum - Front&Rear ROTARY ACCENT
Mazdaspeed F&R license plates
Engine/ Power mod:
SR Motorsports complete pulley kit
Mazdaspeed Cold Air Intake
Borla cat back exhaust system
Custom on/off fan control
15W50 MOTUL racing oil
Mazdaspeed oil cap
Greddy radiator cap
Wheels/Tires/Breaks
4xEnkei RP-F1 18x8.0
4x 235 40 18 Federal 595RS-R
Porterfield Front Racing brake pads (Track Use)
EBC Front bake pads (Yellow)(street use)
EBC Rear brake pads (Red)
EBC F&R Brake Rotors
Stoptech Stainless Brake lines
MOTUL DOT 4 racing brake oil
Suspension
4x Megan Coilovers
Mazdaspeed Front carbon fiber strut bar
Mazdaspeed Rear strut bar
Tanabe Front Sway bar 30.4mm
Tanabe Rear Sway bar 20.4mm
4 pieces under car brace
Interior:
Sparco Spirit bucket seat
Custom low position bracket
All LED light bulbs
Aluminum PEDALS
Mazdaspeed Shift ****
Thanks yours is nice too I actually probably have more than 10 g's on this car . I have pretty much all the mods you have plus a custom full carbon fiber interior maybe I should get some better pics up.
I will take less if I can yank the system out but other than that I dont wanna part it out the mods are what makes the car.
#14
lurking
Thread Starter
Join Date: Jan 2008
Location: Burleson,TX
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Mods lower the value if you have performance parts that make wear and tear on motor but pulleys and an intake I dont think so.
I seriously doubt you would have any problems getting rid of an 07 with mods for anything less than 18k unless the car has crazy miles on it or something is wrong with the car?
I am only asking somebody pay me a quarter of the mods and work that I Put into it . If I had to lower price to 14k I will just keep it. Its not fair to lowball a car if you havent seen it in person.
Last edited by lycan 13; 05-09-2009 at 08:15 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Touge
Canada Forum
0
07-18-2015 05:41 PM