AEM / K&N or MS intake which one?
#1
Sky Blue
Thread Starter
Join Date: Jul 2006
Location: Torontooooooooooo
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
AEM / K&N or MS intake which one?
I was looking for getting an intake i was wondering which one you guys think its sounds better and gives the car the little power.
#12
f all them... save the money buy the k and n intake, take off the vfad and the plastic under it... and your done... all for 50 bucks shipped to your house... use teh other 200 bucks on .... 3/4 of a payment on sway bars, or endlinks, or whatever else you can buy or want for 200 bucks
#14
the WANKEL made me do it
Join Date: Apr 2005
Location: Pittsburgh
Posts: 317
Likes: 0
Received 0 Likes
on
0 Posts
K&N and AEM/MS are both going to be loud and get you about the same power. Only big difference is when cleaning these intakes, you don't need to remove the front bumper to clean or install the K&N
#15
II SOCIETY
Join Date: Nov 2006
Location: The Bay Area
Posts: 1,077
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Mazda-Rati
K&N and AEM/MS are both going to be loud and get you about the same power. Only big difference is when cleaning these intakes, you don't need to remove the front bumper to clean or install the K&N
#18
the bukkake master!
go K&N for ease of installation if you dont want to remove the bumper. i had one and i loved it. it can be loud for some people though. i didnt mind it but some of passengers werent to happy
#19
Registered
iTrader: (1)
Join Date: Jun 2006
Location: Da Hills of Va
Posts: 662
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by KkKAZzZ
But i was watching a this clip, this rx8 had a AEM intake and it sounded really nice. i think im going to go with the MS/AEM.
#21
the WANKEL made me do it
Join Date: Apr 2005
Location: Pittsburgh
Posts: 317
Likes: 0
Received 0 Likes
on
0 Posts
The REVi is just too quiet though. If you're looking for the complete package. LOUDNESS, POWER, COST and EASE OF CLEANING. I would stick with the stock airbox.
Loudness - Remove the VFAD and the 2 dividers inside in airbox.
Power - Cut the air inlet to a larger diameter and add a K&N drop in.
Cold air - add the RB air duct.
Cost - under $200 and will provide about the same gains as the more expensive units.
Loudness - Remove the VFAD and the 2 dividers inside in airbox.
Power - Cut the air inlet to a larger diameter and add a K&N drop in.
Cold air - add the RB air duct.
Cost - under $200 and will provide about the same gains as the more expensive units.