Aluminum Coolant tank
#27
Registered
iTrader: (1)
Finished product. I am going to relocate the coolant one, the hoses at bottom hit the wheel well, the windshield washer reservoir can go at the very end, or even better, oil catch can, doesn't do much anyways, LOL!!
Same for you Phil, make one out of the same canisters of your trio. You need 2 bigger sized hose barbs for it to work propperly. And you need a pressure release cap (not like mine, a regular one will do, I liked mine cause of the color)
![](http://xtreme-toyz.net/imag0131_small.jpg)
![](http://xtreme-toyz.net/imag0132_small.jpg)
Same for you Phil, make one out of the same canisters of your trio. You need 2 bigger sized hose barbs for it to work propperly. And you need a pressure release cap (not like mine, a regular one will do, I liked mine cause of the color)
![](http://xtreme-toyz.net/imag0131_small.jpg)
![](http://xtreme-toyz.net/imag0132_small.jpg)
![](http://xtreme-toyz.net/imag0133_small.jpg)
#28
FI by Pettit-BHR-Cobb AP
iTrader: (3)
I did look at that but when I figured the capacity of the coolant tank I found that room was a real problem. The two tanks on the left are for oil injection, the tank on the right is for windshield cleaner. The small tank in front of the trio is the oil catch can. Due to the fender well limitation I could not make another tank fit into the space that would have the capacity of the stock tank.
#29
Registered
iTrader: (1)
I did noticed today that when I boost for long periods of time my cooling system pressure rises and it loses a bit, not much, had to put about 16 ounces over the weekend, but I did quite some acceleration (no racing
) and had the A/C on all the time, it's my weekend car... ![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
I am thinking maybe if I leave it 1/2 full it will have the space to build up the pressure and not spill any out. Maybe since the reservoir tanks only go 1/2 full for that reason? Any ideas?
![Suspect](https://www.rx8club.com/images/smilies/suspect.gif)
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
I am thinking maybe if I leave it 1/2 full it will have the space to build up the pressure and not spill any out. Maybe since the reservoir tanks only go 1/2 full for that reason? Any ideas?
#32
haha.... No worries... Thanks for the head's up!
Nicest catch cans i have seen so far bro !!!
CHeers!@!
#33
#35
Rear Mount GT35R
iTrader: (7)
i too have used these tanks to make my catch can,sohn, and washer fluid. you can also buy them here also ask about better pricing if you buy more than one. i think i paid 65 each for 3 and 10 bucks shipping.
http://cgi.ebay.com/ebaymotors/Speed...Q5fAccessories
http://cgi.ebay.com/ebaymotors/Speed...Q5fAccessories
#36
i too have used these tanks to make my catch can,sohn, and washer fluid. you can also buy them here also ask about better pricing if you buy more than one. i think i paid 65 each for 3 and 10 bucks shipping.
http://cgi.ebay.com/ebaymotors/Speed...Q5fAccessories
http://cgi.ebay.com/ebaymotors/Speed...Q5fAccessories
nice bumblebeerx8! these looks exactly the same... are they?
do we still need to any mods to change these to cater to the sohn & catch can? (i know the washer fluid needs to change the adapter below)
#37
Registered
iTrader: (1)
Yep, those are it! Thanks BBRX8.
For oil catch you don't have to modify it, but yes, you need to modify one for the SOHN adapter and one for the windshield washer. For the SOHN adapter you can switch the cap on the bottom and the fitting on the side, but they are slightly different thread, you can probably find the right thread hose fitting for the bottom at an Ace hardware store, where I bought mine from. And for the windshield washer I cut the bottom the same size of the windshield washer pump and used the same rubber seal and it worked nicely... For radiator reservoir it's more modification, shown above.
For oil catch you don't have to modify it, but yes, you need to modify one for the SOHN adapter and one for the windshield washer. For the SOHN adapter you can switch the cap on the bottom and the fitting on the side, but they are slightly different thread, you can probably find the right thread hose fitting for the bottom at an Ace hardware store, where I bought mine from. And for the windshield washer I cut the bottom the same size of the windshield washer pump and used the same rubber seal and it worked nicely... For radiator reservoir it's more modification, shown above.
#46
SARX Legend
iTrader: (46)
Yeah it definitely controls intake temps, big difference without it. Also, it is debatable but it also helps direct air down and out the bottom of the engine and thru the side vents. I was told that if not it creates a high pressure area under the hood with no place to vent properly.