Amuse Exhaust Installed
03-10-2004 | 07:44 PM
#1
Thread Starter
Registered User
Joined: Mar 2004
Posts: 8
Likes: 0
From: Olathe, KS
Amuse Exhaust Installed
Just finished installing my amuse exhaust, installation was really easy, took me about an hour to get the stock exhaust off and and about 20 minutes to get the new exhaust on.
Weighed both, the stock exhaust was about 39 pounds with the mid-pipe going to the cat, the amuse ended up being about 18.5 pounds slightly less than half the stock exhaust. It was unreal how light it was, the mid-pipe going to the cat was like a feather and the muffler could easily be lifted with one hand.
As for a performance increase, I don't really detect anything, but then I didn't expect to feel a big difference if any at all. I like the sound so far although it's fairly loud, not a buzzy sound though. I plan on recording some movies of it soon and posting them so everyone can hear what it sounds like, other than that if anyone has any questions, ask away.
-Jeff
Weighed both, the stock exhaust was about 39 pounds with the mid-pipe going to the cat, the amuse ended up being about 18.5 pounds slightly less than half the stock exhaust. It was unreal how light it was, the mid-pipe going to the cat was like a feather and the muffler could easily be lifted with one hand.
As for a performance increase, I don't really detect anything, but then I didn't expect to feel a big difference if any at all. I like the sound so far although it's fairly loud, not a buzzy sound though. I plan on recording some movies of it soon and posting them so everyone can hear what it sounds like, other than that if anyone has any questions, ask away.
-Jeff
03-10-2004 | 09:39 PM
#4
New Member
Joined: Mar 2003
Posts: 9,944
Likes: 2
From: Melbourne, Australia
How much does it cost you, if I may ask?
It supposed to gain about 13ps at the wheels... so it is GREAT STUFF.
If i have it then I will look at rear mirror all the time, don't want people hitting my rear
It supposed to gain about 13ps at the wheels... so it is GREAT STUFF.
If i have it then I will look at rear mirror all the time, don't want people hitting my rear
03-11-2004 | 05:09 PM
#6
Thread Starter
Registered User
Joined: Mar 2004
Posts: 8
Likes: 0
From: Olathe, KS
Pictures
Here's 4 pics I took about 5 minutes ago, I can't get any sound clips right now, my digital rebel doesn't have a movie mode 
, I'll borrow someone's camera soon though and get a clip. Anyway here are the pics:
I can post bigger pics if anyone want.
, I'll borrow someone's camera soon though and get a clip. Anyway here are the pics: I can post bigger pics if anyone want.
Last edited by Scoobyrx8; 03-11-2004 at 05:16 PM.
03-11-2004 | 06:51 PM
#9
Rotary eXperimental-8
Joined: Nov 2003
Posts: 1,830
Likes: 0
From: Gander, Newfoundland, Canada
Alright everyone, dummy question time! 
What material is this exhaust made of? I really like the way the tips look with the bluish flamed look and I always thought that was only found on the titanium exhaust, is this true? Thanks in advance.
What material is this exhaust made of? I really like the way the tips look with the bluish flamed look and I always thought that was only found on the titanium exhaust, is this true? Thanks in advance.
03-11-2004 | 07:28 PM
#10
Thread Starter
Registered User
Joined: Mar 2004
Posts: 8
Likes: 0
From: Olathe, KS
Yeah it's titanium, you can find it at www.bulletproofautomotive.com
As for bigger pics, here's the originals, they were taken in 6 megapixel mode so the largest one is about 3 meg.
Pic 1
Pic 2
Pic 3
Pic 4
You'll probably have to right click and "save as" to download them. I should get that movie soon.
-Jeff
As for bigger pics, here's the originals, they were taken in 6 megapixel mode so the largest one is about 3 meg.
Pic 1
Pic 2
Pic 3
Pic 4
You'll probably have to right click and "save as" to download them. I should get that movie soon.
-Jeff
08-11-2004 | 07:52 PM
#17
New Member
Joined: Mar 2003
Posts: 9,944
Likes: 2
From: Melbourne, Australia
this is disrespectful... I think it is EXTREMELY nice
I think it is very nice. I don't have the time and money to look after a Ti exhaust though. You better know somebody that weld those exhaust and DO NOT go over humps in great speed, becareful reversing out! They are paper thin and AMUSE's one here have cracked it.
I think it is very nice. I don't have the time and money to look after a Ti exhaust though. You better know somebody that weld those exhaust and DO NOT go over humps in great speed, becareful reversing out! They are paper thin and AMUSE's one here have cracked it.
08-12-2004 | 12:12 PM
#18
NOT SEARCHING
Joined: Aug 2003
Posts: 753
Likes: 0
From: Olathe, KS
Originally Posted by Scoobyrx8
Here's 4 pics I took about 5 minutes ago, I can't get any sound clips right now, my digital rebel doesn't have a movie mode , I'll borrow someone's camera soon though and get a clip. Anyway here are the pics:
I can post bigger pics if anyone want.
, I'll borrow someone's camera soon though and get a clip. Anyway here are the pics: I can post bigger pics if anyone want.
I'll be out tonight at 135th and Antioch at Twisters with the rest of my club. The * is still in the shop for the new kit, but I'll have the Widebody 3rd Gen Eclipse out.
08-21-2004 | 11:08 PM
#25
Registered User
Joined: Nov 2003
Posts: 3,281
Likes: 0
From: Glendale, CA
Originally Posted by takahashi
Titanium is just like gold man... it is usually double of normal quality stainless steel
Thread
Thread Starter
Forum
Replies
Last Post
LMURailsplitter02
New Member Forum
1
09-06-2015 11:56 PM
Rupanrx
Series I Aftermarket Performance Modifications
1
09-04-2015 07:44 AM
