Axial Flow Short Shifter
#601
Jst wnt a relibl Turbo
Join Date: Oct 2005
Location: Sacramento, CA
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
I just recieved and installed mine yesterday. Works smooth, and no prob getting into reverse. I do hear a "whine" when accelerating hard. haven't found a good explanation for it though. I do hear that this "wining" noise is not uncommon. The noise is not that bad, but I would like to know what is causing it.......
#602
the more things change
did you put that yellow/green looking material back in?? it is said if you do then you will hear some kind of noise. but if you take it out no noise. richard made sure mine's was out and i don't hear anything but the road..
#603
Registered
iTrader: (5)
Originally Posted by Chris_Bangle
got it. The shifts are shorter and quicker. Installtion is a breeze.
Does the shift effort level drop as the shifter gets more use?
Does the shift effort level drop as the shifter gets more use?
I don't think it gets easier when broken in. There may well be a smoothing the pivot surfaces but the base size is too small to feel. There may be a factor in that oil will replace the installation greese after a short while. This could feel different with the better oils. I don't have it in mine but they speak highly of that purple stuff.
#604
Jst wnt a relibl Turbo
Join Date: Oct 2005
Location: Sacramento, CA
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by micahel
did you put that yellow/green looking material back in?? it is said if you do then you will hear some kind of noise. but if you take it out no noise. richard made sure mine's was out and i don't hear anything but the road..
Someone on the other site thought that the material of the bulb that goes into the gear box is made of a different material and may be the cause. That sounds somewhat reasonable. This site is the best for really technical questions. Anyone know if that piece is made of a different material, and could it be removed and replaced bu the stock bulb?
#606
I would like to quickly reiterate for anyone just joining this thread, how much I truly enjoy my AF short shifter. I paid full price for it and I believe it really is worth it. I have put 3-4K miles on it and it has held up great. Shifting is smooth as ever. I have the stock clutch and flywheel and I believe although this seems like a menial upgrade the difference really is drastic once you install it. And speaking of installing it, it really is a breeze w/ or w/o instructions as you can figure it out quite easily. Just be careful not to lose any of the shifter base nuts to the "e-brake well" as I had a hard time fishing that out.
Money well spent on a quality product that makes driving a great car that much greater.
Thanks again Richard !
Money well spent on a quality product that makes driving a great car that much greater.
Thanks again Richard !
Last edited by Dro; 06-29-2006 at 12:23 AM.
#607
the more things change
[QUOTE=SecrtSqurl]I am going to try that tomorrow. I can't see how less insulation can take away a noise, but I'll try it! Out of curiosity...... did you try the shifter with the green/yellow material installed? Or did you remove it before installing it?
no mine was taken out during the install so no chance to hear the diff. but there guys who say in this thread once they take out the material the noise goes away. unexplanable as to why..
no mine was taken out during the install so no chance to hear the diff. but there guys who say in this thread once they take out the material the noise goes away. unexplanable as to why..
![Confused](https://www.rx8club.com/images/smilies/confused.gif)
#608
the felt put just a touch of rpessure and lets the shifter vibrate.. press lightly on the shifter while you are in any gear and it will whine.. take your hand off and it'll go quiet instantly. I can almost play a song by touching my shifter in diffrent places. pushing it forward slightly in 3rd gear mkes the car sound like a jet engine... even more than it already does.
#610
Extraordinary Engineering
Originally Posted by Richard Paul
Sorry Warren, you and one more go out today. I didn't want to overload the Ontario customs with the same "gift" all in one day. It goes 4-6 day Priority Mail.
![Jump](https://www.rx8club.com/images/smilies/jump.gif)
#611
Administrator
iTrader: (7)
Originally Posted by DarkBrew
Mine arrived today. The wait seemed like forever but it's finaly here! ![Jump](https://www.rx8club.com/images/smilies/jump.gif)
![Jump](https://www.rx8club.com/images/smilies/jump.gif)
![Rock](https://www.rx8club.com/images/smilies/rock.gif)
![Mdrmed](https://www.rx8club.com/images/smilies/mdrmed.gif)
#614
Extraordinary Engineering
Originally Posted by Jedi54
Well stop posting and go install that thing...
![Mdrmed](https://www.rx8club.com/images/smilies/mdrmed.gif)
![Rock](https://www.rx8club.com/images/smilies/rock.gif)
![Mdrmed](https://www.rx8club.com/images/smilies/mdrmed.gif)
Forget clear corners, this should be the first mod for any RX-8!
![Score](https://www.rx8club.com/images/smilies/score.gif)
Last edited by DarkBrew; 07-08-2006 at 03:31 PM.
#616
Registered User
Join Date: Jun 2005
Location: Woodstock Ontario
Posts: 512
Likes: 0
Received 0 Likes
on
0 Posts
hm, is there a problem with people who live in canada not getting them? or are they just slower to ship? i live in canada, and was on the hymee website when i saw it, and i instantly wanted one (after driving with a short throw in my buddys z06) is it just a longer wait then normal?
#617
Registered
iTrader: (5)
Originally Posted by Skiptomylue
hm, is there a problem with people who live in canada not getting them? or are they just slower to ship? i live in canada, and was on the hymee website when i saw it, and i instantly wanted one (after driving with a short throw in my buddys z06) is it just a longer wait then normal?
Are you saying that you ordered one and it hasn't gotten there?
I haven't had a Canada order in almost a month. If you ordered and don't have it give me your name so I can trace it.
#618
Registered User
Join Date: Jun 2005
Location: Woodstock Ontario
Posts: 512
Likes: 0
Received 0 Likes
on
0 Posts
no no no, not yet i havnt, page 42 had posts saying "anyone from canada recieved theirs yet" tyhen a couple people said no. i guess i should have looked at the date posted, hm, im not really concerned about the waiting period.. as long as it gets to meworking and no damage. i wouldnt have a problem waiting a month for it.im in no hurry, just a quick question, thanks for the quick reply though
#619
Honor & Integrity
Join Date: May 2005
Location: Virginia Beach, VA
Posts: 566
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Skiptomylue
no no no, not yet i havnt, page 42 had posts saying "anyone from canada recieved theirs yet" tyhen a couple people said no. i guess i should have looked at the date posted, hm, im not really concerned about the waiting period.. as long as it gets to meworking and no damage. i wouldnt have a problem waiting a month for it.im in no hurry, just a quick question, thanks for the quick reply though
#621
Extraordinary Engineering
Don't count on the savings too much. The government still takes their pound of flesh. My shifter cost about $20 to free it from the post office...
It's still well below what it would have cost if it showed full price on the shipping documents.
It's still well below what it would have cost if it showed full price on the shipping documents.
#624
Administrator
iTrader: (7)
huh?! There is no 5 sp for the RX-8.
#625
Slave to my RX-8 SE
Join Date: Apr 2006
Location: Brampton, ON,Canada
Posts: 146
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Jedi54
huh?! There is no 5 sp for the RX-8.