Axial Flow Short Shifter
#76
Shifty Bastard.
Join Date: Feb 2004
Location: Melbourne, Australia.
Posts: 4,835
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Kings8
It has nothing to do with sex or age for me. It has to do with not being mechanically inclined.
#78
Registered
Join Date: Oct 2005
Location: La Verne, CA
Posts: 170
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Gomez
Have a read of the DIY........it's childs play. Really. Have a go. Become just a little bit mechanically inclined. Your family will be amazed!!
#80
Shifty Bastard.
Join Date: Feb 2004
Location: Melbourne, Australia.
Posts: 4,835
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Kings8
It was quite good, I must admit. I had me thinking I could do it until I read about the breaking clips(which I know I would do) and someone having to mill the unit down.
One person in 100 needs to file the reverse lockout tab. You wont be that one.....!
#83
Registered
iTrader: (5)
Originally Posted by Gomez
Yeah man, they come pre-greased.
Not anymore. It made to much of a mess putting it in the baggie.
It's not a critical thing on the Mazda anyway since it gets oiled from the box.
Any grease will work just until the oil gets up there. In fact I've had guys just put oil on it without problems.
#85
Registered
Join Date: Oct 2005
Location: La Verne, CA
Posts: 170
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Richard Paul
Just drive over and even though your not a young girl I'll put it in for you. N/C
#87
Registered
Join Date: Oct 2005
Location: La Verne, CA
Posts: 170
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by CrabApple-Ti 8
How much for this shifter? Any pics? Is it even still available?
Okay, I went ahead an ordered it. I left you a note in the paypal payment. So if you see an order that's going to La Verne California, it's me. We can set up a time to install when it's convenient for you. Thanks again.
#88
Registered
iTrader: (5)
Originally Posted by CrabApple-Ti 8
How much for this shifter? Any pics? Is it even still available?
There are two other threads with lots of pictures. Better yet go to Gomez DIY thread.
Bring up :axialflow.com for price and if your fast you can get the Feb price of $229.00.
#90
I'm Kind of a Big Deal
Join Date: Aug 2003
Location: Columbus, Ohio
Posts: 918
Likes: 0
Received 0 Likes
on
0 Posts
It's a leap year, how wonderful! Feb. 29 and just ordered! Looking forward to the RP experience!
Richard, It did end up showing that it took $271.00 out of my bank account as an FYI. Will the adjustment be made prior to shipment?
Thanks again for taking the time to talk this morning. It is only 845am in Cali. so I hope it wasn't too early.
Richard, It did end up showing that it took $271.00 out of my bank account as an FYI. Will the adjustment be made prior to shipment?
Thanks again for taking the time to talk this morning. It is only 845am in Cali. so I hope it wasn't too early.
#91
Ordered Monday arrived Thursday. On the car Thursday night. I did manage to break the small tab, but no big deal. Hot melt glue gun fixed that right up.
Love the shifter. Can't beat that metallic click-click from gear to gear. Now I just need to finish my engine break-in so I can really enjoy the shifter.
Good job RP....keep working that axial compressor. I had an Eaton in my Miata and would love something that doesn't create so much waste heat.
Love the shifter. Can't beat that metallic click-click from gear to gear. Now I just need to finish my engine break-in so I can really enjoy the shifter.
Good job RP....keep working that axial compressor. I had an Eaton in my Miata and would love something that doesn't create so much waste heat.
#92
Ordered mine monday and installed it wednesday! I tried to shifter boot yank method and it worked great. No broken tab problems. The whole install took me about 30 minutes, and that was the first time I had taken apart the dash. The shifter feel is incredible, short, sure throws. Thanks RP.
#93
Registered
iTrader: (5)
Originally Posted by fisherdn
Ordered mine monday and installed it wednesday! I tried to shifter boot yank method and it worked great. No broken tab problems. The whole install took me about 30 minutes, and that was the first time I had taken apart the dash. The shifter feel is incredible, short, sure throws. Thanks RP.
See that Gomez. I just did another one today for a new customer, no broken tabs. I had to do it twice on his car too. Just get the front ones up and the back is just worked out.
I wouldn't argue with the expert, but he is a stubbornbastard. With two b's.
Old dogs can learn.
#94
Registered
iTrader: (5)
Originally Posted by Hskr8
gears 1-4 feel great, but 5 & 6 I can't get into very easily... it's as if the stopper needs another 1/16 of an inch in length, as currently it overshoots the 5th & 6th gates
if anyone got one that they have to file down, maybe we could exchange shifters as I need one that's not so filed down...
if anyone got one that they have to file down, maybe we could exchange shifters as I need one that's not so filed down...
Hmm. There have been a couple with this problem but I don't think it is 1/16".
There are non longer then what you have if it hasn't been modified. I know they don't get any longer because that is the OD of the raw stock. I can't make them longer except fot a cleanup cut that's as big as it gets.
If you can't adjust your shifting style for this then you have to move the plate. This is done by removing the pins and adjusting the plate to where you want then tighten down. The holes are slotted for this reason. Just be sure they are tight because if they come loose you may get into reverse without pushing down.
#95
Registered
iTrader: (5)
Originally Posted by Hskr8
are you referring to the triangular plate with 3 bolts? I thought that didn't/couldn't move from some of the posts I read... if it can, then I could probably adjust it left... unless I'm missing what you mean..
EDIT: you are probably right about the 1/16 being too much... I know it will go into the gates 5 & 6 with 1/16, but it probably only needs half that to make it in.
EDIT: you are probably right about the 1/16 being too much... I know it will go into the gates 5 & 6 with 1/16, but it probably only needs half that to make it in.
That's what I ment, just that you must remove the dowel pins. Use a visegrip and try not to lose them.
#99
Shifty Bastard.
Join Date: Feb 2004
Location: Melbourne, Australia.
Posts: 4,835
Likes: 0
Received 0 Likes
on
0 Posts
Bolt part number is......99794-0612
Dowel part number, if req'd.......Y611-17-517 (known as a pin, actually)
Plate part number is.....Y601-17-571A (includes bonded rubber gasket)
Dowel part number, if req'd.......Y611-17-517 (known as a pin, actually)
Plate part number is.....Y601-17-571A (includes bonded rubber gasket)