RX8Club.com

RX8Club.com (https://www.rx8club.com/)
-   Series I Aftermarket Performance Modifications (https://www.rx8club.com/series-i-aftermarket-performance-modifications-23/)
-   -   BHR Midpipe (https://www.rx8club.com/series-i-aftermarket-performance-modifications-23/bhr-midpipe-170605/)

Kane 07-22-2010 01:07 AM

I had an extra one welded on by an exhaust shop - cost like 25 bucks.

I am sure it would look 10000000 times better if Ray does it pre-shipping.

RotaryMachineRx 07-22-2010 08:07 AM


Originally Posted by Kane (Post 3643842)
I had an extra one welded on by an exhaust shop - cost like 25 bucks.

I am sure it would look 10000000 times better if Ray does it pre-shipping.

:kiss:

Cattywampus 07-30-2010 11:45 PM

Any updates? Need this as my stocker is killing my Turbo power. Plus I've only put 1.7k on my car this year and need something to tinker with before my wife makes me sell it cause I don't drive it much.

9krpmrx8 08-02-2010 05:12 PM

Word up, I can't wait. I am borrowing a resonated midpipe in the meantime because the SR motorsports pipe was just too loud with the HKS cat back.

paporx8 08-02-2010 08:13 PM

I have a full race pipe/ catback exhaust ( from manifold to back ) from TURBOXS installed in my car and the sound is beautiful but its insanely loud. I was told to check the BHR mid-pipe cause it should make my car sound a lil bit lower without loosing the quality of the sound. My questions are will the BHR midpipe attach to the TURBOXS catback ? and can any other fellow RX8 owners let me know just how good the BHR midpipe is?

laythor 08-02-2010 11:36 PM

having had the first run of BHR midpipes for over a year.. it is great.

Brettus 08-02-2010 11:43 PM


Originally Posted by Phil's 8 (Post 3641258)
I'm jealous......I only have 5 of the 6......hopefully that will soon be corrected

1/6 here and still quicker than all of you :smoker:

RIWWP 08-03-2010 07:13 AM


Originally Posted by Charles R. Hill (Post 3658341)
Today, I picked up 50 front and 50 rear flanges. I already have 50 O2 bungs, 50 resonators, 50 hanger rods, and 50 hardware kits.

I dropped off parts for one (1) midpipe to be built as a test of both build process and fitment. Once I am satisfied with both, we begin full-scale production and no more parts/supplier delays. Should all go well, I expect to have these 50 done and shipped by the end of August and the remaining pre-order list to be done very soon after that.

Ray, ill remind you, but if mine (2nd group, 68 or so) ends up done close to Sevenstock, is prefer to pick it up in person rather than ship and miss it. :)

RotaryMachineRx 08-03-2010 08:07 AM


Originally Posted by Brettus (Post 3658812)
1/6 here and still quicker than all of you :smoker:

Oh ya? What's your 40 time?

onefatsurfer 08-03-2010 09:30 AM

it's been a long journey, i'm ready for it to come to an end... ;)

Easy_E1 08-03-2010 01:06 PM


Originally Posted by RIWWP (Post 3658949)
Ray, ill remind you, but if mine (2nd group, 68 or so) ends up done close to Sevenstock, is prefer to pick it up in person rather than ship and miss it. :)

Ray will install it for you. :naughty:

pdxhak 08-03-2010 01:09 PM

haha that means you will have to uninstall the CAT :lol2:

Easy_E1 08-03-2010 01:28 PM

http://www.heathersanimations.com/da...fpalaced26.gif

Gr8Bullet 08-03-2010 01:32 PM

mmmmmm looking forward to a future purchase..... :)

onefatsurfer 08-03-2010 02:18 PM


Originally Posted by Charles R. Hill (Post 3659501)
I am headed to our fabber's shop right now to pore over the detail-work on the new run of pipes and the first unit (which will be test-fitted on my car) will be done by tomorrow morning.

As soon as fitment is verified, the green light turns on and the mass-production starts. :)

:fingersx::rock::beer05:

RotaryMachineRx 08-03-2010 02:46 PM

Dammit, 22 people drop out so I am in the first batch of these warlocks

onefatsurfer 08-03-2010 03:48 PM


Originally Posted by RotaryMachineRx (Post 3659666)
Dammit, 22 people drop out so I am in the first batch of these warlocks

lol, this midpipe was my birthday present for when i turned 24. i turned 25 this past may. :rofl:

RIWWP 08-03-2010 04:07 PM


Originally Posted by Charles R. Hill (Post 3659481)
Remind me when I request payment.

Will do.

Easy_E1 08-03-2010 04:24 PM


Originally Posted by onefatsurfer (Post 3659745)
lol, this midpipe was my birthday present for when i turned 24. i turned 25 this past may. :rofl:

Happy belated birthday! :SHOCKED:

RX8pwnage 08-03-2010 10:24 PM


Originally Posted by onefatsurfer (Post 3659745)
lol, this midpipe was my birthday present for when i turned 24. i turned 25 this past may. :rofl:

lawl

RotaryMachineRx 08-04-2010 07:59 AM

Canadian Dollar is strong right now..... hurry up second batch!!!

TheWulf 08-04-2010 10:38 AM

You should've taken payments when you made the list (though I know your answer is you won't make anymore pre-order lists).

Personally I had the money for this a few months ago, now we're in a very tight spot (we even had to downsize our anniversary trip) and I'll likely have to wait a bit before being able to afford this.

I admire your business ethics and that you like to shield your customers from paying for something they aren't getting right away, but in another way I would recommend taking money from people while they have it, it's good for business! Though I can also see how this can backfire (turbo kits anyone?).

'Tis a cruel world and you just can't win!

RIWWP 08-04-2010 10:50 AM


Originally Posted by TheWulf (Post 3660750)
'Tis a cruel world and you just can't win!

Sure they can. Their midpipe and ignition kit prove that they win at life.

9krpmrx8 08-04-2010 11:24 AM

You did it right. We are all impatient (especially me) but had you taken money, people would be bitching up a storm. I am looking forward to quieting my HKS down a bit.

TheWulf 08-04-2010 12:06 PM


Originally Posted by RIWWP (Post 3660769)
Sure they can. Their midpipe and ignition kit prove that they win at life.

At life, yes!
At pre-orders... 1/25 is kinda disappointing.

Although I am 100% sure that in time they will all be sold and then some.


All times are GMT -5. The time now is 06:22 AM.


© 2024 MH Sub I, LLC dba Internet Brands