View Poll Results: Performance, Sound, Looks
Borla
22
47.83%
Greddy
24
52.17%
Voters: 46. You may not vote on this poll
Borla or Greddy ???
#2
2010 Prius - Miss the 8
I'd like the Greddy to say TRUST.. the name sounds cool.. TRUST Besides, I liked the low rumble of the Trust exhaust system I've had in the past. Quiet when it needs to be quiet, loud rumble when you want to rev it up.
Would like to see a dyno on the new one on an 8 though... hmm anyone with stats for these two exhausts?
Would like to see a dyno on the new one on an 8 though... hmm anyone with stats for these two exhausts?
#4
Registered User
Thread Starter
Join Date: Dec 2003
Location: Irving, TX
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
here is this Video and Sound of the BB http://www.bbexhaust.com/av/rx8.html
#5
RX8 HA HA
the B&B exhaust is nice...sounds good..makes a little more power than the borla...but more expensive...B&B also offers a straight through test pipe replacement for the cats...huff over at vivid dynoed about 12hp or something close to that over stock..
#9
Int'l Man of Mystery
Join Date: Jan 2004
Location: Central Florida
Posts: 3,651
Likes: 0
Received 0 Likes
on
0 Posts
I'd say if your car is a show car then B&B, Greddy, or RX-8 store will be the better choice. They come entirely polished, whereas the Borla does not. If you are not going to be putting your car in shows where people will be looking under your car, etc. then choices become a bit more difficult.
Performance wise... from what I can tell they all vary only a little... so no matter which you go with you'll win here.
The Greddy looks good in the pics and TRUST is good stuff. But those tips look a little too big for me. Reports are that there haven't been any plastic melting problems from the larger tip size, but I wonder if it will become an issue if anyone goes to Canzoomer's stage 2 (increased exhaust temp). For some the look of tips that size is a bit of a turn off. Will this tip size fit ok with all bodykits?
Since I've never owned a Porsche, so I know nothing about B&B... but Huff seems straight and the pipes look good in all the pics. The tips are big here, but from the pics it doesn't like it will raise the same concerns as the Greddy.
Borla... having been a long time Stang fan and owner (father and son thing) I know the name Borla. It has been used often and had great reviews from various muscle car magazines. The reports here have been excellent for it. Downs... well a lot of people (at least on this board) are going to have it. Maybe you want to be different...
RX-8 store wasn't mentioned yet. No dyno figures yet, but they seem to be good. From the pics looks are good and after seeing pics in this thread... https://www.rx8club.com/showthread.p...5&pagenumber=2 I'd say that it's pretty sharp...
Results.... I'd like to hear all of these side by side or hear from someone who's heard 2 or 3 different ones. I lean towards Borla or RX-8 store, but I'd vote for the lowest sounding of the group.
Performance wise... from what I can tell they all vary only a little... so no matter which you go with you'll win here.
The Greddy looks good in the pics and TRUST is good stuff. But those tips look a little too big for me. Reports are that there haven't been any plastic melting problems from the larger tip size, but I wonder if it will become an issue if anyone goes to Canzoomer's stage 2 (increased exhaust temp). For some the look of tips that size is a bit of a turn off. Will this tip size fit ok with all bodykits?
Since I've never owned a Porsche, so I know nothing about B&B... but Huff seems straight and the pipes look good in all the pics. The tips are big here, but from the pics it doesn't like it will raise the same concerns as the Greddy.
Borla... having been a long time Stang fan and owner (father and son thing) I know the name Borla. It has been used often and had great reviews from various muscle car magazines. The reports here have been excellent for it. Downs... well a lot of people (at least on this board) are going to have it. Maybe you want to be different...
RX-8 store wasn't mentioned yet. No dyno figures yet, but they seem to be good. From the pics looks are good and after seeing pics in this thread... https://www.rx8club.com/showthread.p...5&pagenumber=2 I'd say that it's pretty sharp...
Results.... I'd like to hear all of these side by side or hear from someone who's heard 2 or 3 different ones. I lean towards Borla or RX-8 store, but I'd vote for the lowest sounding of the group.
Last edited by Japan8; 01-18-2004 at 03:38 AM.
#10
Not so Super right now
Join Date: May 2003
Location: Beyond that there swamp.
Posts: 1,493
Likes: 0
Received 0 Likes
on
0 Posts
Welp, I have heard the Greddy, and the HKS live. To me the greddy sounds a bit nicer and I am happy with it. After I get the stage 1 I will update on the tips/plastic issue, but so far it hasnt been one at all. The tips are large enough (and they have a minor opening in the rear to allow air in) that they dont heat up to any serious degree. of course that will change, but then it might be worth investing in the exhaust finishers.
#12
I'm Kind of a Big Deal
Join Date: Aug 2003
Location: Columbus, Ohio
Posts: 918
Likes: 0
Received 0 Likes
on
0 Posts
I'll throw out the RX8Store as my choice. As if you didn't see that one coming.
Thread for pics and sound below.
https://www.rx8club.com/showthread.p...924#post199924
RX-JImenez - I think that everyone will be a tad biased towards the exhaust that they have purchased; which I'm sure that you already know. Some people will buy an exhaust just based on name recognition alone regardless of price and that's their choice and there is absolutely nothing wrong with that. Others will purchase the first one that they come it contact with because they are able to actually see, hear, and touch it.
I am extremely happy thusfar with the choice that I made and when you finally make your choice, regardless of which one that it is, I know that you'll be happy also. I would tend to bet that there isn't one person (or maybe one) out there that has purchased an aftermarket exhaust that they want to return because they're not happy. Best of luck.
Thread for pics and sound below.
https://www.rx8club.com/showthread.p...924#post199924
RX-JImenez - I think that everyone will be a tad biased towards the exhaust that they have purchased; which I'm sure that you already know. Some people will buy an exhaust just based on name recognition alone regardless of price and that's their choice and there is absolutely nothing wrong with that. Others will purchase the first one that they come it contact with because they are able to actually see, hear, and touch it.
I am extremely happy thusfar with the choice that I made and when you finally make your choice, regardless of which one that it is, I know that you'll be happy also. I would tend to bet that there isn't one person (or maybe one) out there that has purchased an aftermarket exhaust that they want to return because they're not happy. Best of luck.
Last edited by success07; 01-18-2004 at 11:20 PM.
#13
no pistons!
Join Date: May 2003
Location: ORANGE COUNTY, CA
Posts: 434
Likes: 0
Received 0 Likes
on
0 Posts
I say GReddy... best $500 spent! Plus GReddy is a reputable company with a degree of quality that I demand, and my standards are quite high. Noticable performance gain, looks decent, and sounds great... Sweet spot around 4-5k RPMs... when the other ports open up. Just my opinion, HKS is asking too much, but u cant go wrong with HKS.
#15
The reason why Borla is not fit and finished like the other exhaust because they said its useless and would jack up the price, this is why borla is cheaper than the other exhaust
#16
Registered User
Join Date: Dec 2003
Location: Arkansas
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
Is there one exhaust that seems to fit better than others? Which one uses more of the original holes and what-nots from the factory exhaust. I want a good exhaust without alot of crazy modification and rig-ups.
#20
I'm Kind of a Big Deal
Join Date: Aug 2003
Location: Columbus, Ohio
Posts: 918
Likes: 0
Received 0 Likes
on
0 Posts
Silvertrigger and Jeff - Like Genom said, they all will slide into the current configurations with no additional modifications. Most are bolt and go. Some folks are doing it themselves in the matter of couple hours at most.
All of the aftermarket exhausts for the RX8 are carrying a 3.5" to 4" tips and they all seem to fit equally as well.
All of the aftermarket exhausts for the RX8 are carrying a 3.5" to 4" tips and they all seem to fit equally as well.
#21
Registered User
Join Date: Dec 2003
Location: Arkansas
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
Well, with that questioned answered, here's another one. I've read where some people are getting the exhaust finishers to protect the plastic around the exhaust from increased heat. Do most of the exhausts produce that kind of heat, or is it only when combined with something like a CZ1. So, if I'm getting exhaust only, should I get the finishers as a precaution?
#22
WHAT.... YEAH... OK!
Join Date: Aug 2003
Location: Long Island City, NY
Posts: 931
Likes: 0
Received 0 Likes
on
0 Posts
like success07 said...
i am kinda biased towards GReddy, i have liked the way their exhausts sound in the past. BUT I am looking for other opinions.
Does anyone have the greddy so they can take pictures and a sound clip? that would be appreciated.
i am kinda biased towards GReddy, i have liked the way their exhausts sound in the past. BUT I am looking for other opinions.
Does anyone have the greddy so they can take pictures and a sound clip? that would be appreciated.
#23
I'm Kind of a Big Deal
Join Date: Aug 2003
Location: Columbus, Ohio
Posts: 918
Likes: 0
Received 0 Likes
on
0 Posts
SilverT - IMO, I'd pass on the exhaust finishers. I have them and I convinced that I wasted $200+. You can't see them unless you're at just the right angle and they're a pain to clean with the aftermarket exhaust because of the bigger tips.
Shocka - Do a search and something will show up. I've heard it, so I know its out there.
Shocka - Do a search and something will show up. I've heard it, so I know its out there.
#24
Int-X 293WHP 242TQ :)
Join Date: Oct 2002
Location: Omaha, NE
Posts: 1,022
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by SilverTrigger
Well, with that questioned answered, here's another one. I've read where some people are getting the exhaust finishers to protect the plastic around the exhaust from increased heat. Do most of the exhausts produce that kind of heat, or is it only when combined with something like a CZ1. So, if I'm getting exhaust only, should I get the finishers as a precaution?
Well, with that questioned answered, here's another one. I've read where some people are getting the exhaust finishers to protect the plastic around the exhaust from increased heat. Do most of the exhausts produce that kind of heat, or is it only when combined with something like a CZ1. So, if I'm getting exhaust only, should I get the finishers as a precaution?