cold air intake & maintance question
08-23-2009, 03:30 AM
#1
Registered User
Thread Starter
Join Date: Jun 2009
Location: Fresno,Ca
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
cold air intake & maintance question
i am looking to get a cai to improve throttle response and mainly sound I'm stuck between AEM and K&N.
i want to go AEM since its a real COLD air intake not a shirt ram K&N but i am afraid of water locking it. i don't live in a very rainy place (Fresno Ca) and i hand wash my 8.
are there many cases of water lock or is it because people are irresponsible?
i have read other threads on subjects corresponding with this but have not seen the answer of my question.
does the aem come with a coat of protectent to cover it or something along those lines?
Also my 8 is an 04 6sp has 72k miles i bought it at 70k 2 months ago. the previous owner used and abused it and didnt take care of it at all. should i just change all the plugs wires and oil change? or doesnt it have enough miles on it to worry yet?
Thanks, Jason
ps sorry if some of this is a newbies questions i just want the best for my car.
i want to go AEM since its a real COLD air intake not a shirt ram K&N but i am afraid of water locking it. i don't live in a very rainy place (Fresno Ca) and i hand wash my 8.
are there many cases of water lock or is it because people are irresponsible?
i have read other threads on subjects corresponding with this but have not seen the answer of my question.
does the aem come with a coat of protectent to cover it or something along those lines?
Also my 8 is an 04 6sp has 72k miles i bought it at 70k 2 months ago. the previous owner used and abused it and didnt take care of it at all. should i just change all the plugs wires and oil change? or doesnt it have enough miles on it to worry yet?
Thanks, Jason
ps sorry if some of this is a newbies questions i just want the best for my car.
08-23-2009, 05:09 AM
#2
Get the AEM.
Water will not hydro-lock the engine, just screw up the MAF reading.
It comes with a sock that will repel a small amount of water.
You can play it safe and put a plastic bag over the filter when you wash your car.
Whenever you buy a car used you should assume that it wasn't maintained well.
Changing the fluids (engine, trans, diff, coolant, brake) along with the plugs is good so you have a peace-of-mind of knowing it was done.
Water will not hydro-lock the engine, just screw up the MAF reading.
It comes with a sock that will repel a small amount of water.
You can play it safe and put a plastic bag over the filter when you wash your car.
Whenever you buy a car used you should assume that it wasn't maintained well.
Changing the fluids (engine, trans, diff, coolant, brake) along with the plugs is good so you have a peace-of-mind of knowing it was done.
08-23-2009, 05:15 AM
#3
Relax baby!
iTrader: (3)
Join Date: Oct 2008
Location: Nurburgring driver, Germany
Posts: 1,006
Likes: 0
Received 0 Likes
on
0 Posts
i used to have the kn intake v2 and i love it . if you take the vfad out it will be the same as the aem and no water will soak the filter. also i never have idle problems . i sold it because it was to loud almost as loud as my exhaust if not more.
08-23-2009, 11:37 AM
#4
Even is you remove the VFAD your SRi intake will still get mostly hot air when you are idling.
I would definifly get the AEM over the K&N. I had the K&N first and traded it for the AEM when I saw how hot my IAT was when monitoring with the AP.
Don't worry about sucking up to much water. You would have to drive through a lot of water for this to happen.
If you change your fluids, ignition wires (if you are going to do this get the BHR ignition) and spark plugs you are off to a great start. Esspecially at 72K...
G/L
I would definifly get the AEM over the K&N. I had the K&N first and traded it for the AEM when I saw how hot my IAT was when monitoring with the AP.
Don't worry about sucking up to much water. You would have to drive through a lot of water for this to happen.
If you change your fluids, ignition wires (if you are going to do this get the BHR ignition) and spark plugs you are off to a great start. Esspecially at 72K...
G/L
08-23-2009, 03:37 PM
#7
Registered User
Thread Starter
Join Date: Jun 2009
Location: Fresno,Ca
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
the owner kinda screwed me over pretty bad. he said it needed a clutch plate i was fine with that. but it ended up needed a lot more (pedal, hydraulic system and i put in a stage 2 clutch cause it was 50 dollars more) and it doesn't feel slow at all stock i bet a 09 mustang gt from stop light to stop light and i hold my own i haven't really gotten blown out of the water from a stand still. but i RARELY race when i do its fine and it has power when i need it to.
08-23-2009, 10:30 PM
#12
Registered
iTrader: (1)
Join Date: May 2006
Location: Carolina Beach, NC
Posts: 1,934
Likes: 0
Received 0 Likes
on
0 Posts
^yes, the engine will have a reman ID plate attached to it. You can see it when looking under the intake tube, it's silver and blue. If there is one then the engine been replaced, if not well there's your answer.
2 hours?
![mike[piston eater]'s Avatar](https://www.rx8club.com/avatars/mike%5Bpiston-eater%5D-48728.gif?dateline=1334247180)
08-26-2009, 01:54 AM
#22
Registered User
Thread Starter
Join Date: Jun 2009
Location: Fresno,Ca
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
haha well sounds like it should be a fun time. what are some other upgrades i should do now? like ground kits and exhaust??
what are some of both i should look at?
what are some of both i should look at?