Cold Air Intake - Why so much $$$
#27
Nope
iTrader: (9)
Originally Posted by nycgps
K&N makes more top end power.
While Revi makes power thruout the whole rpm band, not as much as K&N in the top end.
but this intake .... I think I can make one myself for 20 bucks TOPs.
While Revi makes power thruout the whole rpm band, not as much as K&N in the top end.
but this intake .... I think I can make one myself for 20 bucks TOPs.
I dunno about that. A local Mazda club had a dyno day and a car showed up with Esplier exhaust, B&B midpipe, K&N intake and laid down 168 (rounded) rwhp. I had just my Umnitza intake and did 179 rwhp, an 11-hp diff and I don't have exhaust. It varies from car to car, true, but I think my Umnitza is better than the K&N (I also realize you didn't say anything about the Umnitza, just pointing out)
Dave
#28
Bummed, but bring on OU!
I always find the "that's not expensive enough for my $xx,xxx car" attitude kind of funny. Guess that keeps the aftermarket in business... More money than sense if you ask me. If it works and costs $10, spend $50 making it look decent (if you actually care what your engine compartment looks like). $60 vs $300+, hmm...
I'll admit, that sometimes you get what you pay for, but that adage only holds true to a point. After that your just being bamboozled if not plain ripped off.
I'll admit, that sometimes you get what you pay for, but that adage only holds true to a point. After that your just being bamboozled if not plain ripped off.
#29
Registered
iTrader: (2)
Originally Posted by rotarygod
Actually it was 135 hp from 84-85, 146 hp from 86-88, and 160 hp from 89-91 but your point is still valid. The turbo cars were 186 hp from 87-88, 200 hp from 89-91, and then finally 255 hp from 93-up. That's the ONLY 2 rotor rotary that made more power than the Renesis stock.
#30
the shit starter
Join Date: Mar 2006
Location: Houston
Posts: 673
Likes: 0
Received 0 Likes
on
0 Posts
from my perspective the reason a great horsepower gain from an intake couldn't be possible on our 8's is because the engine is only 1.3L compared too any forced induction vehicle or big v8 the hp gains would be appropriate too see through the whole RPM range. But since our engines are so small how could you expect a horsepower increase when Mazda all ready did a good engineering job with the cheap mass produced items they made/chose...
My ideas still stand with the K&N, our gains should only be expected at high RPM's and then tuned with a piggyback...
is this just a rotary thing, or where the gains just as small on the old RX7's than is our 8's?
My ideas still stand with the K&N, our gains should only be expected at high RPM's and then tuned with a piggyback...
is this just a rotary thing, or where the gains just as small on the old RX7's than is our 8's?
#31
Rx8_4eVeR
Join Date: Nov 2006
Location: San Jose, Cali
Posts: 852
Likes: 0
Received 0 Likes
on
0 Posts
I have the Revi intake and Rev8 exhaust from RB. I do admit that HP to $ ration is a joke. I think anything making the kind of HP and TQ from 1.3 L has to be close to an engineering marvel. Think of the 8 as a triathlonist, lean mass lean muscle better performance the whole way through.
#35
...is it over yet?
Join Date: Apr 2006
Location: Euclid,OH
Posts: 490
Likes: 0
Received 0 Likes
on
0 Posts
I think it's kind of funny how everyone admits that there is very little power to be made by aftermarket components (besides FI), yet a lot of people dump countless thousands of dollars into them daily.
Hmmm....Maybe I should make parts for the Rx8. If you think about it, all they have to do is look pretty. They don't have to do much of anything....and yet people will still buy them......yes.....excellent.....
Hmmm....Maybe I should make parts for the Rx8. If you think about it, all they have to do is look pretty. They don't have to do much of anything....and yet people will still buy them......yes.....excellent.....
#38
SARX Legend
iTrader: (46)
Wet, and I love it, it looks great sitting in my garage. I am still waiting for the bottle heater and purge kit. I have had to ration out my spending in order to stay married. I also have some warranty items to get fixed prior to the installation. I have done kits on cars in the past but I will take my time and do it perfectly on this one.
Last edited by 9krpmrx8; 03-13-2007 at 09:04 PM.
#39
...is it over yet?
Join Date: Apr 2006
Location: Euclid,OH
Posts: 490
Likes: 0
Received 0 Likes
on
0 Posts
I understand the whole married thing. I'm in the same boat. Where the past cars that you've done the N20 with rotary powered? I am curious to see how well it works out. Keep me posted as I am very intrested. pm me when you get it on.
#40
Originally Posted by 9krpmrx8
HP per $. That's what I'm about.
TT105 has about 19,300 BTU/lb.
TT105 also contains 2.7% oxygen - about 4 times as much as the best oxygenated pump gas.
Thats about 5% more BTU's before the extra O2.
If you get 185 HP to the wheels with pump gas, you should see about 194 HP with TT105. Maybe a little more.
It's cheap power but temporary. It costs about $85 a tankful. Sure you can pay more, buy it by the drum thats about what you'll pay.
#42
SARX Legend
iTrader: (46)
Originally Posted by tony_673
I understand the whole married thing. I'm in the same boat. Where the past cars that you've done the N20 with rotary powered? I am curious to see how well it works out. Keep me posted as I am very intrested. pm me when you get it on.
No this is the first rotary I have owned. I also have done installs on a few stangs and a Prelude and a GSR. Dry kits are easy as pie, wet kist depend on the car. Others on this site have the same ZEX kit I have so I expect high 13's at least with a 50 shot.
#44
SARX Legend
iTrader: (46)
I paid around $600.00, check out the "official" nitrous thread by CRH. I have a heater from an NX kit but decided to go ZEX with everything. My good friend is a painter so he will be painting the bottle VR too prior to the install. I will see what the trunk temps are and hopefully I won't need the heater but most likely I will.
#48
Registered
Join Date: Nov 2006
Location: Grand Prairie, TX
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Air Intake Systems
I have been scoping out which intake kit to purchase.
The three on the table are the REVI, K&N, and AEM.
I see the k&n coming in at the cheapest averaging $250.
The AEM is hitting around $350.
The revi kit and duct hits around $600.
First question: How loud are the K&N and AEM? Is the noise that bad to where it's worth the $$ for the revi?
Second: How does each perform? Is there a clear winner?
Here's a question....since it's only up to 5hp for the cold air intake...would anyone recommend simply the replacement K&N stock filter?
Thanks for your thoughts!
The three on the table are the REVI, K&N, and AEM.
I see the k&n coming in at the cheapest averaging $250.
The AEM is hitting around $350.
The revi kit and duct hits around $600.
First question: How loud are the K&N and AEM? Is the noise that bad to where it's worth the $$ for the revi?
Second: How does each perform? Is there a clear winner?
Here's a question....since it's only up to 5hp for the cold air intake...would anyone recommend simply the replacement K&N stock filter?
Thanks for your thoughts!
#49
Registered
If I had to buy an aftermarket intake, it would be the Racing Beat. Saying that however, keep in mind that Speedsource races their RX-8's with stock airboxes and stock paper filters. The only thing they do different is remove the VFAD duct and open up the airbox inlet a little bit.