Fuel Pressure Sensor Location
#51
SARX Legend
iTrader: (46)
Quick question, just got the Aeromotive part from BHR and realized I don't have an adapter to get the nitrous line on the larger side opposite of the npt port. I believe it is -6 AN correct?
#52
Rew rew rew your boat
iTrader: (3)
i'm about to get the 15120 fitting from aeromotiv, where do you guys put your guage? i dont have any guage yet inside the car...probably will do that but not now. i'll probably go with a mecanical guage but i dont know how i can see it from inside the cabin when rolling.
any suggestions?
any suggestions?
#53
weeeeeeeeee
iTrader: (12)
electric / digital gauge .. sender is mounted to the T connector with the quick connects/disconnects and the wiring plumbed through the existing firewall hole to a nicely mounted gauge... numerous options there... A pillar, defrost vent, upper center console, ashtray... hell I've even seen gauges where the cassette deck usually goes.
#54
Registered
iTrader: (25)
yeah, I have the Prosport electric fuel pressure sensor in the NPT side with the wiring cable run to the gauge inside and an AN plug on the other, Aeromotive provides an NPT plug with the fitting but not the AN plug
I guess it was too much trouble for a dense n00b to go to the Aeromotive site and see that it is a -6 fitting
http://aeromotiveinc.com/products-pa...6-access-port/
lemme' help teh lil' helpless fella out:
http://www.summitracing.com/parts/EAR-581406ERL/
.
I guess it was too much trouble for a dense n00b to go to the Aeromotive site and see that it is a -6 fitting
http://aeromotiveinc.com/products-pa...6-access-port/
lemme' help teh lil' helpless fella out:
http://www.summitracing.com/parts/EAR-581406ERL/
.
Last edited by TeamRX8; 04-08-2012 at 11:19 PM.
#55
Rew rew rew your boat
iTrader: (3)
got the guage and the fitting but my local part store ordered the wrong an-06 plug...they gave me one like that and fuel is leaking from everywhere with it :http://www.summitracing.com/parts/AER-FBM3714/ but i guess its this one i need : http://www.summitracing.com/parts/AER-FBM3724/ Same thing you posted team, different brand
ill go get another plug tomorrow and ill wait for my pod...
Also, i tought about using those to do the connections on existing wires : is it ok? or should i weld and shrink wrap the connection?
Also 2 : where do you take your 12v? i tought about using the cigarette lighter
ill go get another plug tomorrow and ill wait for my pod...
Also, i tought about using those to do the connections on existing wires : is it ok? or should i weld and shrink wrap the connection?
Also 2 : where do you take your 12v? i tought about using the cigarette lighter
Last edited by MaD666MaX; 04-16-2012 at 08:35 PM.
#58
SARX Legend
iTrader: (46)
Yeah the room fuse is ideal but you can also get power from the seat heater switch connectors (I don't have the heated seats so my connectors do not control anything) and some other places too.
Thread
Thread Starter
Forum
Replies
Last Post
Audio Concepts ATL
New Member Forum
21
09-26-2021 01:59 PM
9krpmrx8
Series I Trouble Shooting
23
11-05-2015 11:45 PM