Notices
Series I Aftermarket Performance Modifications Discussion of power adding modifications

Hey Guys QUICK QUESTION, need answer!

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 04-27-2005 | 12:11 PM
  #1  
Undies's Avatar
Thread Starter
Registered User
 
Joined: Apr 2005
Posts: 8
Likes: 0
Hey Guys QUICK QUESTION, need answer!

I recently ordered a shinka rx8 - expected to arrive 2 weeks from now. Im located in Toronto Canada. I am looking into purchasing a mazdaspeed body kit for my rx8. I don't mind dealing with local or even international vendors (as long as they are reliable and deliver to canada). Price is not a problem, i just want to get my hands on the MS kit, however, i realize there are a lot of knock offs out there, so specifically my kit needs to be made out or urethane.

I was wondering, for all you rx8 heads here, would you slap an MS kit on and lower the car? or leave it on a stock height (i find it pretty low as it is). My last car was a pumped up 01 lude and it had a 4 inch ground clearance, and it was ok.

Secondly, I know the shinka in teh states has pewter rims and upgraded dampeners a and yada yada. Is this shinka identical to the canadian special edition (minus the shinka stickers)

And are there any new changes for the 06?
Old 04-27-2005 | 12:16 PM
  #2  
dazygirl415's Avatar
Registered User
 
Joined: Oct 2004
Posts: 1,090
Likes: 0
I just got the MS replica front & sides installed and so far I'm o-kay with stock height. I'm still adjusting and have hit the front twice so I'm somewhat timid about lowering. If you lower, don't lower much, maybe 1/2" as suggested by another member.

I don't know about any model differences b/n US and Canada.

I don't know of any 06 changes. Maybe a search would yield more info.
Old 04-27-2005 | 12:24 PM
  #3  
rotten42's Avatar
Mentalhealth is overrated
 
Joined: Aug 2004
Posts: 2,289
Likes: 2
From: Calgary
Originally Posted by Undies
I recently ordered a shinka rx8 - expected to arrive 2 weeks from now. Im located in Toronto Canada. I am looking into purchasing a mazdaspeed body kit for my rx8. I don't mind dealing with local or even international vendors (as long as they are reliable and deliver to canada). Price is not a problem, i just want to get my hands on the MS kit, however, i realize there are a lot of knock offs out there, so specifically my kit needs to be made out or urethane.

I was wondering, for all you rx8 heads here, would you slap an MS kit on and lower the car? or leave it on a stock height (i find it pretty low as it is). My last car was a pumped up 01 lude and it had a 4 inch ground clearance, and it was ok.

Secondly, I know the shinka in teh states has pewter rims and upgraded dampeners a and yada yada. Is this shinka identical to the canadian special edition (minus the shinka stickers)

And are there any new changes for the 06?
I'm not sure why you would pay the extra premuim for a Shinka (or special edition - Canada0 if you are just going to mod it?
Old 04-27-2005 | 12:42 PM
  #4  
khtm's Avatar
I like rusty spoons
 
Joined: Jul 2004
Posts: 1,959
Likes: 0
From: Calgary, Alberta
I can't imagine lowering my 8...I already scape the **** out of the bottom when going over speedbumps...even on an angle. And entering and exiting driveways that have a dip in them is no different, especially if there's passengers.

Lowering it would make it almost unpractical to drive on a daily basis.
Old 04-27-2005 | 01:31 PM
  #5  
zoom44's Avatar
Administrator
 
Joined: Jul 2002
Posts: 21,958
Likes: 115
From: portland oregon
Originally Posted by Undies

And are there any new changes for the 06?

tons of changes ! read this thread
Old 04-27-2005 | 06:11 PM
  #6  
WestCoastFun's Avatar
Registered User
 
Joined: Jan 2005
Posts: 49
Likes: 0
From: Nanaimo, BC Canada
Originally Posted by khtm
I can't imagine lowering my 8...I already scape the **** out of the bottom when going over speedbumps...even on an angle. And entering and exiting driveways that have a dip in them is no different, especially if there's passengers.

Lowering it would make it almost unpractical to drive on a daily basis.

I am surprised that you are having this problem. I lowered mine by 1”, and have not had a single problem - and we have some big speed bumps here in Nanaimo. I had lowered my Miata prior to the 8, and had many issues with it, but so far the 8 has been fine.
Old 04-28-2005 | 10:35 PM
  #7  
Mikelikes2drive's Avatar
Registered
 
Joined: Feb 2004
Posts: 1,553
Likes: 0
i lowered mine and i dont have any problems with speedbumps in southern california... you must be really heavy or carry around alot of things
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
1.21 gigawatts!!!
New Member Forum
1
02-14-2019 04:23 AM
M Pizle
Series II Exterior Appearance and Body Kits
5
02-02-2016 05:47 AM
MolecularConcept
New Member Forum
15
08-05-2015 05:43 PM
robd1337
New Member Forum
11
07-31-2015 10:35 PM
westgman
Good Guy/Bad Guy
1
07-16-2015 12:18 AM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -5. The time now is 12:26 AM.