Which Hi-flow cat to buy (not a pipe with the cat, JUST the cat)
#76
recently bought one from their online store, nice quality
http://www.casperselectronics.com/mm...ory_Code=MAZDA
Dynatech is low cost which is a good thing because you'll need to change it often ...
http://www.casperselectronics.com/mm...ory_Code=MAZDA
Dynatech is low cost which is a good thing because you'll need to change it often ...
#77
Zoom-Freakin'-Zoom
iTrader: (5)
recently bought one from their online store, nice quality
http://www.casperselectronics.com/mm...ory_Code=MAZDA
Dynatech is low cost which is a good thing because you'll need to change it often ...
http://www.casperselectronics.com/mm...ory_Code=MAZDA
Dynatech is low cost which is a good thing because you'll need to change it often ...
wow,
thx mark..
that solves the issue at hand..
beers
![Beer](https://www.rx8club.com/images/smilies/beer.gif)
#79
As for Team, his "if it ain't expensive and hard to source- it's crap" attitude applies for most everything- from endlinks to coilover to exhaust component selection. Reminds me of the Mike Myers SNL "Welcome to All Things Scottish - if it's not Scottish, it's craaaapp!!" skits. Just substitute "Scottish" with "used by TeamRX8."
![Lol](https://www.rx8club.com/images/smilies/lol.gif)
Like I said, I'm willing to try the Dynatech cat out to see how it holds up. Dynatech makes decent products which I'm familiar with (coming from the LS1 world). If it works, it works. If it fails, I'll post up the failure.
#80
Zoom-Freakin'-Zoom
iTrader: (5)
ah,
smart like tuna, read between the lines.
the truth is i doubt like team anything at that price point will hold up.
i have not seen photos of the core of what your are using.. but what is in mine is very open... as the dyno showed..
the hi flow cat i had before lasted about 20k miles, and was not so hi flow..
as to the o2 bung. i am thinking outside the box..![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
would love to see a photo of the core of your cat.
beers
smart like tuna, read between the lines.
the truth is i doubt like team anything at that price point will hold up.
i have not seen photos of the core of what your are using.. but what is in mine is very open... as the dyno showed..
the hi flow cat i had before lasted about 20k miles, and was not so hi flow..
as to the o2 bung. i am thinking outside the box..
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
would love to see a photo of the core of your cat.
beers
![Beer](https://www.rx8club.com/images/smilies/beer.gif)
Why is your project doomed? O2 bung location affecting your sensor readings?
As for Team, his "if it ain't expensive and hard to source- it's crap" attitude applies for most everything- from endlinks to coilover to exhaust component selection. Reminds me of the Mike Myers SNL "Welcome to All Things Scottish - if it's not Scottish, it's craaaapp!!" skits. Just substitute "Scottish" with "used by TeamRX8."
Like I said, I'm willing to try the Dynatech cat out to see how it holds up. Dynatech makes decent products which I'm familiar with (coming from the LS1 world). If it works, it works. If it fails, I'll post up the failure.
As for Team, his "if it ain't expensive and hard to source- it's crap" attitude applies for most everything- from endlinks to coilover to exhaust component selection. Reminds me of the Mike Myers SNL "Welcome to All Things Scottish - if it's not Scottish, it's craaaapp!!" skits. Just substitute "Scottish" with "used by TeamRX8."
![Lol](https://www.rx8club.com/images/smilies/lol.gif)
Like I said, I'm willing to try the Dynatech cat out to see how it holds up. Dynatech makes decent products which I'm familiar with (coming from the LS1 world). If it works, it works. If it fails, I'll post up the failure.
#81
ah,
smart like tuna, read between the lines.
the truth is i doubt like team anything at that price point will hold up.
i have not seen photos of the core of what your are using.. but what is in mine is very open... as the dyno showed..
the hi flow cat i had before lasted about 20k miles, and was not so hi flow..
as to the o2 bung. i am thinking outside the box..![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
would love to see a photo of the core of your cat.
beers![Beer](https://www.rx8club.com/images/smilies/beer.gif)
smart like tuna, read between the lines.
the truth is i doubt like team anything at that price point will hold up.
i have not seen photos of the core of what your are using.. but what is in mine is very open... as the dyno showed..
the hi flow cat i had before lasted about 20k miles, and was not so hi flow..
as to the o2 bung. i am thinking outside the box..
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
would love to see a photo of the core of your cat.
beers
![Beer](https://www.rx8club.com/images/smilies/beer.gif)
![](http://home.att.net/~carlos.ramirez1/wsb/media/116212/site1183.jpg)
Here's a photo of the Dynatech catalytic. Its core is rather standard. If I get 20K miles out of it, I'm a happy man.
Where did you have your O2 sensor mounted? I'm going to try to mimic the RP Supercat pipe's cat and O2 sensor location with my setup (though anything other than stock O2 sensor to cat to header collector location relationship is less than ideal).
![](http://rx7.com/store/rx8/images/rx8supercat_large.jpg)
Last edited by SouthFL; 06-19-2008 at 01:10 AM.
#83
Zoom-Freakin'-Zoom
iTrader: (5)
![](http://home.att.net/~carlos.ramirez1/wsb/media/116212/site1183.jpg)
Here's a photo of the Dynatech catalytic. Its core is rather standard. If I get 20K miles out of it, I'm a happy man.
Where did you have your O2 sensor mounted? I'm going to try to mimic the RP Supercat pipe's cat and O2 sensor location with my setup (though anything other than stock O2 sensor to cat to header collector location relationship is less than ideal).
![](http://rx7.com/store/rx8/images/rx8supercat_large.jpg)
if you could send me a photo big style to my screen name@gmail.com of the inside.
but from the photos you have flow is going to be an issue..
if you go back in this thread a bit you will see a big difference.
but who knows what will live!!
beers
![Beer](https://www.rx8club.com/images/smilies/beer.gif)
#84
Registered
iTrader: (4)
As for Team, his "if it ain't expensive and hard to source- it's crap" attitude applies for most everything- from endlinks to coilover to exhaust component selection. Reminds me of the Mike Myers SNL "Welcome to All Things Scottish - if it's not Scottish, it's craaaapp!!" skits. Just substitute "Scottish" with "used by TeamRX8." ![Lol](https://www.rx8club.com/images/smilies/lol.gif)
![Lol](https://www.rx8club.com/images/smilies/lol.gif)
#86
Apologies on my end to Team, alnielsen, and to the forum for anything I may have written which is not in character with the forum's manner.
Carlos.
Last edited by SouthFL; 06-20-2008 at 03:03 PM.
#90
Zoom-Freakin'-Zoom
iTrader: (5)
#92
Administrator
iTrader: (7)
subscribing for future use.
#100
Zoom-Freakin'-Zoom
iTrader: (5)
maybe.
but it is mounted in a very unconventional way.. and until i pull the mid pipe / cat i cant say for sure. thought i was going to happen this weekend.. but i have no garage and my tranny is not going to get changed...
but i have no cel.. and everything is running fine.. power is down a bit, but that is a motor / compression issue. am working on it.
i would say if you have a midpipe. well stick it in..![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
beers
but it is mounted in a very unconventional way.. and until i pull the mid pipe / cat i cant say for sure. thought i was going to happen this weekend.. but i have no garage and my tranny is not going to get changed...
but i have no cel.. and everything is running fine.. power is down a bit, but that is a motor / compression issue. am working on it.
i would say if you have a midpipe. well stick it in..
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
beers
![Beer](https://www.rx8club.com/images/smilies/beer.gif)