MSD Ignition Project
02-09-2008, 12:47 PM
#1
04 Silver GT
Thread Starter
Join Date: Jan 2005
Location: Alberta Canada
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts
MSD Ignition Project
I started a thread previously on utilizing LS1 MSD ignition coils on RX-8.
After consulting MSD and a few others have went the way of MSD pn#6302 x2 and MSD pn# 8207 x4 as instructed by MSD tech who has done this before with great results .. Project will be completed at end of Feb /begining March.. If your interested or have info
follow progress or post .Thanks.
http://www.msdignition.com/2007/light.html and http://www.msdignition.com/coil_blaster_6_8207.htm
After consulting MSD and a few others have went the way of MSD pn#6302 x2 and MSD pn# 8207 x4 as instructed by MSD tech who has done this before with great results .. Project will be completed at end of Feb /begining March.. If your interested or have info
follow progress or post .Thanks.
http://www.msdignition.com/2007/light.html and http://www.msdignition.com/coil_blaster_6_8207.htm
Last edited by ltrx8; 02-09-2008 at 01:45 PM.
02-09-2008, 01:31 PM
#3
04 Silver GT
Thread Starter
Join Date: Jan 2005
Location: Alberta Canada
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts
Yes . He has done it with the above combination with great success on a RX-8.. He gave me his email @ MSD
waiting on his wiring diagram..I in no way will claim the fame ..Dre @ MSD deserves that as he is the person
who put this arrangement together. I'm seeing a set up from I beleive esmeril racing wich uses (looks like)same
coils.. I wonder if their using the dual coil ignitors in the kit their about to release.. His arrangement (Dre) will cost
less than $350 plus install.All parts can be had through Jegs or Summit Racing.(they seem to have best prices and
good reputation in the performance part world).Also I will be making own plug wires from a universal kit (msd/accel).
most likely MSD though.
Last edited by ltrx8; 02-09-2008 at 01:41 PM.
02-09-2008, 01:51 PM
#5
04 Silver GT
Thread Starter
Join Date: Jan 2005
Location: Alberta Canada
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts
Sorry I didnt make that clear here..I did in other thread but should have here.. I will get pics and video while and when completed.. As far as Dyno to prove gains that might be tough.(location is Southern Alberta)but I will give it a hands on dyno.lol
04-28-2008, 04:21 PM
#6
04 Silver GT
Thread Starter
Join Date: Jan 2005
Location: Alberta Canada
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts
Sorry guys and gals . Have had to hold project for a while. Business is going good. No time. Argg.
Maybe now I can afford that stage 2 turbo from Greddy..
Maybe now I can afford that stage 2 turbo from Greddy..
03-08-2010, 09:21 AM
#9
Registered
I have heard people say that adding ignition boxes to certain systems does no good because the coils are so good and I've heard this on many cars over and over again through the years. I've also seen this to be untrue in nearly all of those cases so take that as you will.
Thread
Thread Starter
Forum
Replies
Last Post
Learners_Permit
Series I Interior, Audio, and Electronics
8
09-27-2015 07:38 PM
