Notices
Series I Aftermarket Performance Modifications Discussion of power adding modifications

Racing Beat and Greddy sp2 question...

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 06-10-2005 | 01:26 AM
  #1  
BomberNYC's Avatar
Thread Starter
Registered User
 
Joined: Aug 2003
Posts: 106
Likes: 0
Racing Beat and Greddy sp2 question...

I'm thinking about adding an exhaust to my RX8. After doing some research on this site... i've narrowed it down to 2 exhausts. The RB and the Greddy SP2. My question is are the tips of these two exhaust the same size? i saw some pictures of both and from what i can tell.. it seems like the tips on the Greddy SP2 is stupid big.
Old 06-10-2005 | 01:38 AM
  #2  
LiL BenNy's Avatar
Bubblicious? DEF.
 
Joined: Mar 2004
Posts: 4,062
Likes: 0
i dont have either but im rather sure the greddy are the biggest tips out. and def bigger than RB
Old 06-10-2005 | 02:57 AM
  #3  
HaloX's Avatar
Banned
 
Joined: Sep 2004
Posts: 76
Likes: 0
From: San Francisco
the greddy has 4.5" diameter exterior tips while I believe the RB has approximately a 4" diameter exterior pipe. Correct me if I'm wrong.
Old 06-10-2005 | 02:43 PM
  #4  
BomberNYC's Avatar
Thread Starter
Registered User
 
Joined: Aug 2003
Posts: 106
Likes: 0
anyone have a close lup picture of both Graddy and Racing Beat's exhaust taken from the back?
Old 06-10-2005 | 03:20 PM
  #5  
RA-Eight's Avatar
Scuderia
iTrader: (6)
 
Joined: Jan 2005
Posts: 1,955
Likes: 0
From: Buckeye Country
Ask, and you shall receive. Hopefully this is an okay angle for you. I wouldn't necessarily say the GReddy SP2 is stupid big, but IMHO I think it fits the hole nicely. Sounds great too! I also heard you might have fitment issues if you're planning on a Mazdaspeed rear bumper. Sorry about the size. :o

Old 06-10-2005 | 05:21 PM
  #6  
HaloX's Avatar
Banned
 
Joined: Sep 2004
Posts: 76
Likes: 0
From: San Francisco
Go here. http://mazdatrix.com/8exhaust.htm

It shows both tips pretty clearly IMO.
Old 06-10-2005 | 05:32 PM
  #7  
army_rx8's Avatar
X-Sapper
 
Joined: Jan 2004
Posts: 2,392
Likes: 0
From: where angle's fear to tread
the greddy tips also aren't round..more like oval if i remember correctly. also the rb has 4" tips and a 3" exhaust pipe...the greddy is 60 mm i believe. (maybe 65 i forget)
Old 06-10-2005 | 05:49 PM
  #8  
expo1's Avatar
He's as bad as Can
 
Joined: Feb 2004
Posts: 4,309
Likes: 2
From: Manchester, NJ
This should help. Greddy SP2 4 1/2 "
Attached Thumbnails Racing Beat and Greddy sp2 question...-dcp_0003.jpg  
Old 06-10-2005 | 05:50 PM
  #9  
army_rx8's Avatar
X-Sapper
 
Joined: Jan 2004
Posts: 2,392
Likes: 0
From: where angle's fear to tread
yea teh greddy is a lill oval like 120mm x 100 or somthing like that.
Old 06-10-2005 | 05:55 PM
  #10  
XDEEDUBBX's Avatar
RX8 HA HA
 
Joined: Aug 2003
Posts: 11,772
Likes: 5
From: Gardena Cali 310
i'd pick the greddy over the RB....even though i have the hks exhaust....
Old 06-10-2005 | 06:58 PM
  #11  
dgerald's Avatar
God is like a shamrock...
 
Joined: Jul 2004
Posts: 94
Likes: 0
From: Tulsa, OK
I like both the RB abd GReddy exhaust systems, but I have the SP2. Trust me, it may seem big at first, but IMO I think it's because stock is too small. They actually fill the holes quite nicely. The SP2 will change color on you though and get a little gold, but I think it looks cool.
Old 06-10-2005 | 07:40 PM
  #12  
BomberNYC's Avatar
Thread Starter
Registered User
 
Joined: Aug 2003
Posts: 106
Likes: 0
i've actually read about the discoloration.. and i really dont mind it...
Old 06-10-2005 | 07:49 PM
  #13  
XDEEDUBBX's Avatar
RX8 HA HA
 
Joined: Aug 2003
Posts: 11,772
Likes: 5
From: Gardena Cali 310
the discoloration on racing beats is bad....i've seen one that turned completely gold..literally!
Old 06-10-2005 | 08:26 PM
  #14  
Jedi54's Avatar
Administrator
iTrader: (7)
 
Joined: Mar 2004
Posts: 22,444
Likes: 2,797
From: The Dark Side
Originally Posted by XDEEDUBBX
the discoloration on racing beats is bad....i've seen one that turned completely gold..literally!
That's a bit alarming

I'm actually considering going with the RB just because from the short clips I've heard, I seem to prefer the sound. Just a bit more subtle for my taste. (IMO)

Little off topic: Any tricks to keeping these exhausts looking nice and shiny? (YES, I am lazy and don't feel like searching)
Old 06-10-2005 | 08:38 PM
  #15  
expo1's Avatar
He's as bad as Can
 
Joined: Feb 2004
Posts: 4,309
Likes: 2
From: Manchester, NJ
Originally Posted by Jedi54

Little off topic: Any tricks to keeping these exhausts looking nice and shiny? (YES, I am lazy and don't feel like searching)
A product called " Never Dull "
Old 06-11-2005 | 08:54 AM
  #16  
RotaryManiac's Avatar
1st time rotorhead
 
Joined: May 2005
Posts: 449
Likes: 0
From: Closter, NJ
Eagle One "Never Dull".
Old 06-12-2005 | 09:27 PM
  #17  
St.Char's Avatar
CarCrazy
 
Joined: Nov 2004
Posts: 80
Likes: 0
From: Indianapolis, IN
Originally Posted by BomberNYC
anyone have a close lup picture of both Graddy and Racing Beat's exhaust taken from the back?
Here ya go - Racing Beat!
Attached Thumbnails Racing Beat and Greddy sp2 question...-exhaust-1.jpg   Racing Beat and Greddy sp2 question...-exhaust-2.jpg   Racing Beat and Greddy sp2 question...-exhaust-4.jpg  
Old 06-12-2005 | 09:29 PM
  #18  
RotaryManiac's Avatar
1st time rotorhead
 
Joined: May 2005
Posts: 449
Likes: 0
From: Closter, NJ
Damn, those racing beats are nice. The sp2 is too big IMO, but then again, i might still end up getting one.
Old 06-13-2005 | 12:07 AM
  #19  
xdrian's Avatar
Banana Yellow :P
 
Joined: Oct 2004
Posts: 330
Likes: 0
From: Woodbridge, NJ
they both sound great, its just a matter of taste
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Hunterkelley24
Series I Engine Tuning Forum
14
06-14-2022 09:32 AM
galognu
Rotary Swaps
138
11-16-2020 06:20 AM
TotalAutoPerformance
Vendor Classifieds
3
10-14-2015 01:29 PM
RX8mzda
RX-8 Parts For Sale/Wanted
2
10-01-2015 11:17 PM
RAVSPEC
Vendor Classifieds
0
10-01-2015 02:59 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: Racing Beat and Greddy sp2 question...



All times are GMT -5. The time now is 11:54 AM.