Racing Beat Header Update
#352
Administrator
iTrader: (7)
You sir are one of the two and it isn't the latter.
![Wink](https://www.rx8club.com/images/smilies/wink.gif)
Not trying to be an ******* here but the bottom line is you're worried about a header that YOU CAN'T SEE from under the hood and your claim that your car is completely legal is complete B.S.
The LEO's might not have recognized your violations but it does not change the fact that your clear corners, tint, and headlights are all against the California Vehicle Code. (aka; illegal)
![Cool](https://www.rx8club.com/images/smilies/cool.gif)
#353
Silver Power
iTrader: (4)
Join Date: Oct 2006
Location: Pasadena, CA
Posts: 631
Likes: 0
Received 0 Likes
on
0 Posts
my point is that if i got caught with the headers i would have to get them removed which is a complete bitch to do..around here SOUND is what gets you pulled over..does anyone have a sound clip of the headers with an after market exhaust and stock cat?
#355
Administrator
iTrader: (7)
how are you going to get caught? "around here" = SoCal. I'm in Pasadena at least once a week and I've never had any problems.
Do me a favor: grab a few of your friends (who aren't super familiar with RX-8's) and pop your hood. Have them point at your headers.
Let me know how that goes...
My point is they'll point at the wrong thing because the headers are not easily visible. It's not like they say "RACE HEADERS" in big bright lettering.
You got an intake? (if so, what brand?)
Do me a favor: grab a few of your friends (who aren't super familiar with RX-8's) and pop your hood. Have them point at your headers.
Let me know how that goes...
My point is they'll point at the wrong thing because the headers are not easily visible. It's not like they say "RACE HEADERS" in big bright lettering.
You got an intake? (if so, what brand?)
#356
Administrator
iTrader: (7)
#358
Administrator
iTrader: (7)
what year is your car? The reason I ask is because I just pulled this off AEM's website:
RX-8 2005-2009 1.3L R2 - - Naturally Aspirated
Install Time - 4 hrs.
Emissions Compliance - No, Pending Legality
If yours is a 2004 then you're good, if not then the intake would be of bigger concern then RB's headers. A cop will spot that intake WAY before he spots your headers.
Alright, lets get this thing back on track now that we've covered the emissions questions in CA.
Anyone have pics of this bad boy installed or dynos?
RX-8 2005-2009 1.3L R2 - - Naturally Aspirated
Install Time - 4 hrs.
Emissions Compliance - No, Pending Legality
If yours is a 2004 then you're good, if not then the intake would be of bigger concern then RB's headers. A cop will spot that intake WAY before he spots your headers.
Alright, lets get this thing back on track now that we've covered the emissions questions in CA.
Anyone have pics of this bad boy installed or dynos?
#360
Registered User
Join Date: Sep 2004
Location: Rohnert Park CA
Posts: 755
Likes: 0
Received 0 Likes
on
0 Posts
As long as you can see the amber light, from 500 feet and 50 feet at night that is all the side marker you need.
See CA vehicle codes 25100:
http://dmv.ca.gov/pubs/vctop/d12/vc25100.htm
Reflectors:
http://dmv.ca.gov/pubs/vctop/d12/vc24608.htm
http://dmv.ca.gov/pubs/vctop/d12/vc24609.htm
#361
悪魔のR
iTrader: (12)
Join Date: Jan 2008
Location: Boston
Posts: 1,528
Likes: 0
Received 0 Likes
on
0 Posts
Back on topic here...
Any measurements or dynos with this? How about back pressure measurement or engine and exhaust flow measurements? Good friend of mine had taken his time to educate me on these things and I was wondering if anyone has any of these?
Would be really helpful for the community. If anyone notices..Racing Beat doesn't have this info.
Any measurements or dynos with this? How about back pressure measurement or engine and exhaust flow measurements? Good friend of mine had taken his time to educate me on these things and I was wondering if anyone has any of these?
Would be really helpful for the community. If anyone notices..Racing Beat doesn't have this info.
![Frown](https://www.rx8club.com/images/smilies/frown.gif)
#362
RB header installed
Cons:
-Not a 15 minute install like on a 1st gen or a miata.
-It's not visible enough to show it off.
Pros:
-Absolutely beautiful design and craftsmanship, there are details that are very well thought out.
-Lighter than the stock manifold, sorry, didn't weigh it.
-Haven't driven it much or heard it at WOT from the outside but I think it might be quieter than the stock manifold. I also have the RB race pipe installed.
-Included hardware and instructions are well done. Follow the instructions the first time. Don't be stupid like me and think that you can take shortcuts. Their instructions work! (Hey, I'm a guy, I don't ask for directions either)
-Fitment on the car is like any other RB product, like OEM.
-Value. Having fabricated headers in the past I was more than happy to pay the price for this one.
-----------------------------------
No, I don't have a dyno or flow testing. RB usually gives conservative numbers and I'm sure that certain mods will allow more or less gain.
-Not a 15 minute install like on a 1st gen or a miata.
-It's not visible enough to show it off.
Pros:
-Absolutely beautiful design and craftsmanship, there are details that are very well thought out.
-Lighter than the stock manifold, sorry, didn't weigh it.
-Haven't driven it much or heard it at WOT from the outside but I think it might be quieter than the stock manifold. I also have the RB race pipe installed.
-Included hardware and instructions are well done. Follow the instructions the first time. Don't be stupid like me and think that you can take shortcuts. Their instructions work! (Hey, I'm a guy, I don't ask for directions either)
-Fitment on the car is like any other RB product, like OEM.
-Value. Having fabricated headers in the past I was more than happy to pay the price for this one.
-----------------------------------
No, I don't have a dyno or flow testing. RB usually gives conservative numbers and I'm sure that certain mods will allow more or less gain.
Last edited by dvcn; 12-18-2008 at 10:28 AM.
#365
About two months.
It took me a while to find a transmission (I slightly missed a hard shift at 9300rpms), slow shipping, etc.
It takes me a relatively long time to put the car up on stands and take the RF wheel off. It takes a bit of trial and error figuring out what length of sockets and extensions to use but it is straightforward. A couple of tight spots but you get some from underneath and others from inside the wheel well.
So, about 1-2 hours? I say it's more difficult because on 1st gen RX-7's and miatas you can be ham fisted and use impact tools. On the 8 there are a few more nuts and bolts and you can't use power tools on many of them.
Second time around I'd say under an hour and three beers.
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
It takes me a relatively long time to put the car up on stands and take the RF wheel off. It takes a bit of trial and error figuring out what length of sockets and extensions to use but it is straightforward. A couple of tight spots but you get some from underneath and others from inside the wheel well.
So, about 1-2 hours? I say it's more difficult because on 1st gen RX-7's and miatas you can be ham fisted and use impact tools. On the 8 there are a few more nuts and bolts and you can't use power tools on many of them.
Second time around I'd say under an hour and three beers.
#367
Administrator
iTrader: (7)
RB Intake
RB duct
RB Headers
RB Dual Resonated midpipe (coming Spring '09)
RB Exhaust
That is gonna be full of WIN!!!
I figure I'll do the headers / midpipe at the same time, this is gonna be one sweeeet sounding car
RB duct
RB Headers
RB Dual Resonated midpipe (coming Spring '09)
RB Exhaust
That is gonna be full of WIN!!!
I figure I'll do the headers / midpipe at the same time, this is gonna be one sweeeet sounding car
#368
Add coils and tuning to your setup and it will scream.
#369
I might have to take some video/sound clip. The header + race pipe is definitely quieter than the stock manifold + race pipe. The header + resonated pipe will be reasonably quiet. Either way, the sound quality is EXCELLENT.
Add coils and tuning to your setup and it will scream.
Add coils and tuning to your setup and it will scream.
208WHP on a Mustang Dyno is Incredible. What was your baseline before tuning?
#370
https://www.rx8club.com/series-i-aftermarket-performance-modifications-23/dyno-gotham-racing-tuned-accessport-racing-beat-parts-153312/
#371
My 8 looks like a Smurf
iTrader: (4)
Join Date: Sep 2007
Location: Ottawa, ON, Canada
Posts: 1,742
Likes: 0
Received 0 Likes
on
0 Posts
I don't think that's an unreasonable number.
I hit 192 on a Mustang dyno with only an exhaust + UD pulley + AEM CAI. And this is 30 seconds after installing the CAI so the ECU didn't have the CAI fuel trims yet. Adding flywheel + headers + racepipe + tune I'd expect to hit more than 208.
Not sure if you have an exhaust or not, but if you don't I would def. recommend one at this point!
I hit 192 on a Mustang dyno with only an exhaust + UD pulley + AEM CAI. And this is 30 seconds after installing the CAI so the ECU didn't have the CAI fuel trims yet. Adding flywheel + headers + racepipe + tune I'd expect to hit more than 208.
Not sure if you have an exhaust or not, but if you don't I would def. recommend one at this point!
#372
These results are great but require running a race pipe. I have tried it and cant get past the noise and stink of it. I wonder what could be achineved with a cat in place like the RP Supercat.
I am making 198/144 on the dynojet.
I am making 198/144 on the dynojet.
#374
Administrator
iTrader: (7)
take the video camera, I wanna hear! I should have my BHR ignitions soon so we'll have very similar setups