Rotary Extreme Dual cat-back
#1
Tony says, RX8s are GREAT
Thread Starter
Rotary Extreme Dual cat-back
The prototype is complete. The prototype has v-bands and is hand cut and welded. The mufflers are bassani mufflers and there are Ti-Tips.
The production run will be mostly mandrel bent and hand welded and will use swedge type slip connects with botled brakets. The reason for the change is to save cost for the customer and to save space in between the PPF and gas tank area.
I will have the exhaust dynoed either tomorrow or thusday.
The price is on RCC.
This exhaust weighs 23 lbs.
]
The production run will be mostly mandrel bent and hand welded and will use swedge type slip connects with botled brakets. The reason for the change is to save cost for the customer and to save space in between the PPF and gas tank area.
I will have the exhaust dynoed either tomorrow or thusday.
The price is on RCC.
This exhaust weighs 23 lbs.
]
Last edited by Benjamz; 04-23-2012 at 10:02 AM.
#5
Tony says, RX8s are GREAT
Thread Starter
This cat-back is set-up for the dual header I have comming out. I will be making a full dual exhaust from the header back.
youtube videos added
youtube videos added
Last edited by Benjamz; 09-24-2008 at 05:38 AM.
#6
I don't buy Kool-Aid
#10
Tony says, RX8s are GREAT
Thread Starter
Thanks 636, this is only the prototype.
It cost $1700 to make. Its double the normal price because it has double the parts. But I'm working on some things to make it more affordable.
It cost $1700 to make. Its double the normal price because it has double the parts. But I'm working on some things to make it more affordable.
Last edited by Benjamz; 09-24-2008 at 12:07 PM.
#14
#15
Tony says, RX8s are GREAT
Thread Starter
TeamRX8, your comment is your thoughts. You have freedom of speech.
But it is my design, I like it, it looks good to me, it sounds good to me, and it is a good looking exhuast.
"THIS IS NOT A RACE EXHAUST" so really it should not be judged as such.
Weight was not a factor.
Price was not a factor.
Power addition matters but probably wont really be seen with this exhaust until my dual header is done.
Hopefully I'll get it dynoed today.
So I am curious to hear what you (TeamRX8) have to say, all comments are welcome.
TeamRX8, I saw your exhaust. If I wanted a lightweight track exhaust, Im sure yours is perfect because you made yours for those reasons. Credit is given where credit is due. My exhaust has it's own market.
But it is my design, I like it, it looks good to me, it sounds good to me, and it is a good looking exhuast.
"THIS IS NOT A RACE EXHAUST" so really it should not be judged as such.
Weight was not a factor.
Price was not a factor.
Power addition matters but probably wont really be seen with this exhaust until my dual header is done.
Hopefully I'll get it dynoed today.
So I am curious to hear what you (TeamRX8) have to say, all comments are welcome.
TeamRX8, I saw your exhaust. If I wanted a lightweight track exhaust, Im sure yours is perfect because you made yours for those reasons. Credit is given where credit is due. My exhaust has it's own market.
Last edited by Benjamz; 09-24-2008 at 12:11 PM.
#17
Tony says, RX8s are GREAT
Thread Starter
It's kinda loud, yes it drones on the freeway a little. Under throttle it sounds nice.
But this is the prototype and the next one will be closer to production.
The next one will have mandrel bending, slip connections withe brackets and different tips.
#19
Registered
#20
#24
Registered
iTrader: (25)
http://www.youtube.com/watch?v=iZZhxW5ym68
a very limited niche market is great if it supports the effort
you may think I'm trying to drag you down but I actually wish you the best ...