RX8 Piggyback ECU
#1
Thread Starter
Registered
Joined: Dec 2003
Posts: 70
Likes: 0
From: Sydney, Australia ph: 61 2 9716 7690
RX8 Piggyback ECU
Ric Shaw Performance in Australia has now developed a fully adjustable piggyback ECU for the RX8, operating with a windows software package to retune the engine management. It also caters for turbo charged and super charged conversions.
#10
Thread Starter
Registered
Joined: Dec 2003
Posts: 70
Likes: 0
From: Sydney, Australia ph: 61 2 9716 7690
RX8on19s, i can ship now. i am still tuning / testing on my car but i can send what i have tuned already for anyone to then test and adjust themselves from there. this sould be done by tuners with experience and equipment only.
i tested 0-100 kms/h times.
results: 3/4 full tankof fuel,80kg driver,DSC off,27 deg C temp on the day(hot).
1) 6.45
2) 6.50
3) 6.71
4) 6.85
1/4 mile not done yet. fuel economy not done yet.
i tested 0-100 kms/h times.
results: 3/4 full tankof fuel,80kg driver,DSC off,27 deg C temp on the day(hot).
1) 6.45
2) 6.50
3) 6.71
4) 6.85
1/4 mile not done yet. fuel economy not done yet.
#12
Thread Starter
Registered
Joined: Dec 2003
Posts: 70
Likes: 0
From: Sydney, Australia ph: 61 2 9716 7690
more testing on ecu.
original bridgstone 225 tyers
23 c temp on dash
80 kg driver
2/3 tank
1)6.06!!!!!! wow
2)6.56
3)6.93 axle tramp
4)6.86
will get some photos.
original bridgstone 225 tyers
23 c temp on dash
80 kg driver
2/3 tank
1)6.06!!!!!! wow
2)6.56
3)6.93 axle tramp
4)6.86
will get some photos.
#17
Thread Starter
Registered
Joined: Dec 2003
Posts: 70
Likes: 0
From: Sydney, Australia ph: 61 2 9716 7690
guys , with the auto cars it will still work but i havent done one and i need to ckeck if the ecu wiring is the same as 6 port engine. if the ecu is wired right it will allow tune changes of fuel and ignition but the 4 port my get better or worse results.this is a Q ??????
#21
Thread Starter
Registered
Joined: Dec 2003
Posts: 70
Likes: 0
From: Sydney, Australia ph: 61 2 9716 7690
guys , the ecu has a map in it i have done and it will increase performance as the 0-100 km/h times show.it controls fuel and ignition.with optiomal 2 x aux and map sensor for turbos.
#23
Your saying that the times are better as we can see? 0 to 100 kph is 62 mph as you know. Your time of 6.43 is .5 off of what Mazda says is their 0 to 60 time. Canzoomer says times of 5.4 to 5.6 could be obtainable with his mod.
Thankx.
Thankx.
#25
Originally posted by RIC SHAW
i will be testing back to back the Canzoomer unit and our unit tomorrow.
more to come.
i will be testing back to back the Canzoomer unit and our unit tomorrow.
more to come.
Hymee and i conducted some tests on Maurices stage 1 kit today i will talk to you on friday and share the information with you .
It will be a good to compare /share our information .
michael