AccesTuner Race....Questions & Discussion
#201
no agenda
iTrader: (2)
I took the Cobb Stage 1 and made a few minor changes and saved it under a different name.
Loaded that one in to the ECU.
When I go to the ECU menu on the ATR software only the Live Tuning and Reset ECU options are available, the Data Logging option is grayed out.
When I select the Live Tuning option I get an error message saying it cannot connect to the ECU, then all my Dashboard lights go freaky, including the RPM needle and Speedometer.
Only way to fix it is to Reset the Codes.
There is no need for a special cable is there?
Just the standard USB cable is what I'm using.
#204
no agenda
iTrader: (2)
@chickenwafer: The AP Updater already had the Beta firmware unchecked <sigh>. So I tried checking them and updating with the Beta firmware. You well know the result of this, fail. Exact same error "cannot connect to ECU". But I had to try.
One thing however is I got lazy and only turned the Key to the "on" position. I didn't actually start my car. I'm assuming this will still work?
@r0tor: Yeah I posted on this a little earlier. This might actually be the problem. Below is what happens when I try to update the dongle software.
<quote>
I've tried several methods to install the Dongle update software:
- with the AP unit attached to pc
- with the AP unit not connected to pc
- PC connected to dongle while plugged into ODBII receptacle
- PC connected to dongle not connect to ODBII receptacle
Each time I run through the install I get an error "The device is not plugged, cannot update the driver."
</quote>
THANKS for you help people I do appreciate. Keep your ideas coming please.
One thing however is I got lazy and only turned the Key to the "on" position. I didn't actually start my car. I'm assuming this will still work?
@r0tor: Yeah I posted on this a little earlier. This might actually be the problem. Below is what happens when I try to update the dongle software.
<quote>
I've tried several methods to install the Dongle update software:
- with the AP unit attached to pc
- with the AP unit not connected to pc
- PC connected to dongle while plugged into ODBII receptacle
- PC connected to dongle not connect to ODBII receptacle
Each time I run through the install I get an error "The device is not plugged, cannot update the driver."
</quote>
THANKS for you help people I do appreciate. Keep your ideas coming please.
#207
no agenda
iTrader: (2)
FYI
Found this post in the Cobb Forum:
http://forums.cobbtuning.com/forums/...585#post603585
Its not a fix but others in the same situation.
I'm still digging through stuff.
Found this post in the Cobb Forum:
http://forums.cobbtuning.com/forums/...585#post603585
Its not a fix but others in the same situation.
I'm still digging through stuff.
#208
rot8ing
iTrader: (1)
glad you're not the only one. maybe someone will think of a fix. i don't really see the need to use the live stuff though. anyway, good luck.
on mine it won't show standard values and a graph at the same time. the graph will just disappear when i check the box. clicking other maps, hopping in and out, standing on one leg, all does nothing to bring it back.
works fine on xp though. weird.
on mine it won't show standard values and a graph at the same time. the graph will just disappear when i check the box. clicking other maps, hopping in and out, standing on one leg, all does nothing to bring it back.
works fine on xp though. weird.
#209
no agenda
iTrader: (2)
GREAT NEWS!
Update ATR, I've already tried it and SUCCESS!
http://forums.cobbtuning.com/forums/...ad.php?t=57054
Update ATR, I've already tried it and SUCCESS!
http://forums.cobbtuning.com/forums/...ad.php?t=57054
#215
Does Hymee's solution have any disadvantage's compared to AP? I know this has probably been disscussed to death in other threads.
I had my mind set to swap out my Unichip Q piggyback to AP just because I wanted to start get full control over my EMS without dealing with tuners.
Kane, you do have alot of knowledge of this, would Hymme's product and your Baseline give me the same package as AP with Accesstuner Race?
I had my mind set to swap out my Unichip Q piggyback to AP just because I wanted to start get full control over my EMS without dealing with tuners.
Kane, you do have alot of knowledge of this, would Hymme's product and your Baseline give me the same package as AP with Accesstuner Race?
#216
Illudium Q-36 Space Moderator
iTrader: (1)
I tune with the Hymee on my car - they do the same things; the biggest difference at the moment is the number of tables the Hymee has "figured out" is less than the AP - but all the important stuff is there.
Baseline gets the same results out of both of them.
Baseline gets the same results out of both of them.
#219
Yes I have read that, it would be nice if hymee would add that as an option. I have a constant CEL for my midpipe and its little annoying. dont need a lamp telling me that I have a problem with my cat, I uninstalled it...
#222
Dongbag extrordinare
Join Date: Nov 2004
Location: Away from the fruits of my labor
Posts: 1,090
Likes: 0
Received 0 Likes
on
0 Posts
-Yambo
#224
Anyone else not able to get the AP to log data? I go into the Data Log section and press ok to start logging, but then the AP goes back to my previous live monitor selection and it says not logging underneath it.
Unless I'm mistaking the functionality and need a laptop plugged in instead?
Unless I'm mistaking the functionality and need a laptop plugged in instead?