Baseline Automated Tuning Beta Now Available for Download
11-29-2008, 09:28 PM
#126
Yeah the accel PSI on the RPM map is for Acceleration Enrichment which is not active yet - so don't worry about it.
The PSI Scale for the AFR map is the PSI scale all of your tuning comes from.
Double check the Help for more info.
www.ppo2performance.com - Click Help/FAQ
11-30-2008, 10:32 PM
#129
Finished the Help Introduction and started work on the Engine Set-up Wizard.
www.ppo2performance.com
Click Help / Faq
Please let me know if any of the information is difficult to understand.
www.ppo2performance.com
Click Help / Faq
Please let me know if any of the information is difficult to understand.
11-30-2008, 11:10 PM
#133
Ok; thanks for being a good sport - I am trying to update the Help info as fast as I can.
Please let me know what if any errors you might be getting so I can try to help.
Worse case - I'll take your version of baseline (emailed to me) and see for myself.
Please let me know what if any errors you might be getting so I can try to help.
Worse case - I'll take your version of baseline (emailed to me) and see for myself.
12-09-2008, 03:19 PM
#137
You get a new version... the biggest downside is you lose your AFR map and scale info; if it is that big of a deal to re-do it; email me you old one as a zip file and I'll move it over.
Might take me a few days to get to it though.
Kinda sucks - but it is my poor mans version control; I don't want someone using an older one.
Might take me a few days to get to it though.
Kinda sucks - but it is my poor mans version control; I don't want someone using an older one.
12-09-2008, 06:36 PM
#142
Yes and No - I have all of the tools in hand to figure out the best way to work the scaling and tuning functions. I just need the time to test them on my car.
I will be starting that and the Int-X testing very shortly.
I will be starting that and the Int-X testing very shortly.
12-14-2008, 04:18 PM
#144
The Set-Up Wizard Help is Complete.
http://ppo2performance.com/docs/?cat=8
New software version to be made available shortly.
http://ppo2performance.com/docs/?cat=8
New software version to be made available shortly.
12-22-2008, 12:03 AM
#146
FINALLY!!! I have finished the Help Files. Everything is Documented except for the Appendixes.
Happy Reading... You all have NO IDEA how much I hated doing this... LOL
http://ppo2performance.com/docs/?page_id=15
Happy Reading... You all have NO IDEA how much I hated doing this... LOL
http://ppo2performance.com/docs/?page_id=15
03-14-2009, 09:22 PM
#149
PPO2's Tuning Software Introduction Video
IMPORTANT ANNOUNCEMENT: Version 1.5 will be released in May with MAF based tuning supported!
This copy will work until May 15th 2009. *** Updated Version 1.4***
Sorry for the delay folks; I had some issues to resolve.
I will try to get out new versions of the Beta as I fix MAJOR issues.
Link to Download Version 1.4 -
ZIP Clicky!!!
UNZIPPED Clicky!!!
You MUST have MS Access 2000 or later to use the Beta version. If not you will have to wait until I move it to a standalone.
How to Use the Wizard Help This sets up the motor for Baseline
How to Import a Datalog into Baseline
How to Create a Tune and View
User Guide is in progress under "Help".
Sample Log File to play with - http://www.mediafire.com/?mmntwl0wknm
For Hondata - use the % to Add or Remove; since your maps are not in Duration or Duty Cycle.
For PFC - UPDATE!!! Apexi PFC Now Has the Duration Map available!
For IntX - Be sure to set up the auxilary fueling in the Injector Setup Window by Checking the Auxiliary Fueling Block. And use the % to Add or Remove also.
For AP Racetuner - go ahead an set the Manifold PSI Scale up in load - and see what kind of logs you get; I don't know how it will work yet - but if you are bored. I do know the HP calculations will be wayyyyyy off.
IMPORTANT ANNOUNCEMENT: Version 1.5 will be released in May with MAF based tuning supported!
This copy will work until May 15th 2009. *** Updated Version 1.4***
Sorry for the delay folks; I had some issues to resolve.
I will try to get out new versions of the Beta as I fix MAJOR issues.
Link to Download Version 1.4 -
ZIP Clicky!!!
UNZIPPED Clicky!!!
You MUST have MS Access 2000 or later to use the Beta version. If not you will have to wait until I move it to a standalone.
How to Use the Wizard Help This sets up the motor for Baseline
How to Import a Datalog into Baseline
How to Create a Tune and View
User Guide is in progress under "Help".
Sample Log File to play with - http://www.mediafire.com/?mmntwl0wknm
For Hondata - use the % to Add or Remove; since your maps are not in Duration or Duty Cycle.
For PFC - UPDATE!!! Apexi PFC Now Has the Duration Map available!
For IntX - Be sure to set up the auxilary fueling in the Injector Setup Window by Checking the Auxiliary Fueling Block. And use the % to Add or Remove also.
For AP Racetuner - go ahead an set the Manifold PSI Scale up in load - and see what kind of logs you get; I don't know how it will work yet - but if you are bored. I do know the HP calculations will be wayyyyyy off.
