Boosted 8 Running too Rich (w/ AP)
#27
Got Boost?
Thread Starter
Join Date: Jun 2010
Location: Houston, TX
Posts: 155
Likes: 0
Received 0 Likes
on
0 Posts
So I guess I'll have to source a pipe from someone in town and the couplers to go with it. Then I"ll have to weld a damn bung on the pipe for the MAF sensor. Wouldn't it be easier to change the MAF calibration? I saw a thread on that. I'm going to read it.
Jeff, I need your tuning services!!! But as the car is my daily driver (for now) I'm not sure how long I can drive with your base map...
Jeff, I need your tuning services!!! But as the car is my daily driver (for now) I'm not sure how long I can drive with your base map...
#28
SARX Legend
iTrader: (46)
So I guess I'll have to source a pipe from someone in town and the couplers to go with it. Then I"ll have to weld a damn bung on the pipe for the MAF sensor. Wouldn't it be easier to change the MAF calibration? I saw a thread on that. I'm going to read it.
Jeff, I need your tuning services!!! But as the car is my daily driver (for now) I'm not sure how long I can drive with your base map...
Jeff, I need your tuning services!!! But as the car is my daily driver (for now) I'm not sure how long I can drive with your base map...
There is a thread here somewhere where a guy is making and selling MAF housing that are identical supposedly to the AEM/stock housing in terms of dimensions.
#29
Banned
iTrader: (3)
https://www.rx8club.com/mazdamaniac-183/attention-current-mazdamaniac-custom-calibration-customers-212845/
#30
Got Boost?
Thread Starter
Join Date: Jun 2010
Location: Houston, TX
Posts: 155
Likes: 0
Received 0 Likes
on
0 Posts
An hour or so is too long?
https://www.rx8club.com/showthread.php?t=212845
https://www.rx8club.com/showthread.php?t=212845
#31
Banned
iTrader: (3)
Oh I forgot that you were doing this real-time deal. So let me ask you this: when I purchase the Calibration Service, I get your turbo base map to install and run for data logs, right? Can I then switch back to my current map until I can attend your Real-Time tuning session? Then I submit the data logs from the base map, and within one hour I get the adjusted map, right?
If your MAF setup is non-standard or you have bigger-than-stock injectors in the primary position, you will need a modified base map to get the car running.
You can subscribe and show up for the live tuning session and I'll prepare a base map for you right at that moment. Then, you can go out and get some logs and come back.
Some people get the entire process done in one sitting. It depends on your schedule.
#32
Got Boost?
Thread Starter
Join Date: Jun 2010
Location: Houston, TX
Posts: 155
Likes: 0
Received 0 Likes
on
0 Posts
Essentially.
If your MAF setup is non-standard or you have bigger-than-stock injectors in the primary position, you will need a modified base map to get the car running.
You can subscribe and show up for the live tuning session and I'll prepare a base map for you right at that moment. Then, you can go out and get some logs and come back.
Some people get the entire process done in one sitting. It depends on your schedule.
If your MAF setup is non-standard or you have bigger-than-stock injectors in the primary position, you will need a modified base map to get the car running.
You can subscribe and show up for the live tuning session and I'll prepare a base map for you right at that moment. Then, you can go out and get some logs and come back.
Some people get the entire process done in one sitting. It depends on your schedule.
#35
Pew Pew Pew
iTrader: (10)
http://houston-imports.com/forums/sh...d.php?t=607990 That's the link so you don't have to search for it. I really haven't kept up to date on the tuning/turbo stuff since I don't have the money for it, so if I have something wrong my bad. edit: Pretty sure they had more posts after I posted up Turblown's answer but they must have deleted them.
#36
SARX Legend
iTrader: (46)
http://houston-imports.com/forums/sh...d.php?t=607990 That's the link so you don't have to search for it. I really haven't kept up to date on the tuning/turbo stuff since I don't have the money for it, so if I have something wrong my bad. edit: Pretty sure they had more posts after I posted up Turblown's answer but they must have deleted them.
I love how they make it sound like they know their **** and the install is all finished up. Any wrench monkey can install a kit. I swear, it's so hard to really find capable shops.
Stroud, you removed your crash bar to mount the intercooler? Your brave man, especially in Houston.
Last edited by 9krpmrx8; 04-14-2011 at 05:06 PM.
#37
Got Boost?
Thread Starter
Join Date: Jun 2010
Location: Houston, TX
Posts: 155
Likes: 0
Received 0 Likes
on
0 Posts
Hey thanks for that link. I had no idea they made a thread for my car. The pics look really good. The car actually runs really well, just very rich and I'd like to lean it out a tad. I was thinking that a larger ID MAF housing means that for each MAF voltage, the MAF (g/s) is slightly lower than stock. Somebody correct me if I'm wrong.
Yes, is sucks I lost the impact bar in the front, but it's worth it!
Yes, is sucks I lost the impact bar in the front, but it's worth it!
#39
Got Boost?
Thread Starter
Join Date: Jun 2010
Location: Houston, TX
Posts: 155
Likes: 0
Received 0 Likes
on
0 Posts
The shop told me that I needed a recirculation pipe for the BOV as "air leaves the system that the MAF measures. It needs to stay in the system." But I would have rather had the BOV vent to atmosphere cuz that sound is awesome. Is this true what they said?
#41
Banned
iTrader: (3)
Awesome. Well then I'll leave the MAF housing alone and let you do your magic. I have bigger injectors, but I'm not sure if they were the primary ones or not I'll have to double check which ones I bought and had installed. I think they were 780cc injectors, but I can't remember if they were primary or not. Hopefully the shop knows. I know my map had one of the injector size settings larger than stock, so I'll look that one up.
The OE MAF housing maxes out at 430 HP, give or take.
A 3" i.d. MAF housing will max out at 360 HP or less.
No, it is not. There are many FAR more elegant ways of dealing with it. Cutting out the bar completely is just a short-cut.
Last edited by MazdaManiac; 04-14-2011 at 08:42 PM.
#42
Got Boost?
Thread Starter
Join Date: Jun 2010
Location: Houston, TX
Posts: 155
Likes: 0
Received 0 Likes
on
0 Posts
We were in touch. Chris just wanted something for nothing.
VTA BOV sounds cool, but ultimately will run like ***.
I will need ALL of that data or I will not be able to do much.
The OE MAF housing maxes out at 430 HP, give or take.
A 3" i.d. MAF housing will max out at 360 HP or less.
I would suggest otherwise.
No, it is not. There are many FAR more elegant ways of dealing with it. Cutting out the bar completely is just a short-cut.
VTA BOV sounds cool, but ultimately will run like ***.
I will need ALL of that data or I will not be able to do much.
The OE MAF housing maxes out at 430 HP, give or take.
A 3" i.d. MAF housing will max out at 360 HP or less.
I would suggest otherwise.
No, it is not. There are many FAR more elegant ways of dealing with it. Cutting out the bar completely is just a short-cut.
I am not sure where I can move the intake air filter so that I can have my impact bar put back on. Did you see the link that was posted above to my build on Houston Imports? That's why they took the impact bar off. I'm open to suggestions. Once I have these things sorted out, I'll purchase your tuning service. I need to get new coils first...
#43
Got Boost?
Thread Starter
Join Date: Jun 2010
Location: Houston, TX
Posts: 155
Likes: 0
Received 0 Likes
on
0 Posts
http://houston-imports.com/forums/sh...d.php?t=607990 That's the link so you don't have to search for it. I really haven't kept up to date on the tuning/turbo stuff since I don't have the money for it, so if I have something wrong my bad. edit: Pretty sure they had more posts after I posted up Turblown's answer but they must have deleted them.
I'm glad I have people here to really know what they were talking about to help me. I was so sick of dealing with the shop that as soon as the car was done I took it and ran. I plan on getting MM tuning have having this done right.
Boost is fun...
#45
Registered
[quote=Stroudism;3946487]J8635621, thanks for the link. I really appreciate it.
I'm glad I have people here to really know what they were talking about to help me. I was so sick of dealing with the shop that as soon as the car was done I took it and ran. I plan on getting MM tuning have having this done right.
Boost is fun... [/quote
you're right, boost is fun!
I'm glad I have people here to really know what they were talking about to help me. I was so sick of dealing with the shop that as soon as the car was done I took it and ran. I plan on getting MM tuning have having this done right.
Boost is fun... [/quote
you're right, boost is fun!
Last edited by jtripp06; 04-15-2011 at 09:33 AM.
#46
Got Boost?
Thread Starter
Join Date: Jun 2010
Location: Houston, TX
Posts: 155
Likes: 0
Received 0 Likes
on
0 Posts
Anytime, just let me know. I took Unknown_Disciple for a ride in it and he had the biggest **** eating grin I've ever seen. He might be boosted next, lol.
Last edited by Stroudism; 04-20-2011 at 03:05 PM. Reason: Removed lie about road racing.
#47
Anytime, just let me know. I took Unknown_Disciple for a ride in it and he had the biggest **** eating grin I've ever seen. He might be boosted next, lol.
Some douche in a new 335i came blasting by me on the feeder of I-10, I was cruising at 60, and in a matter of a few seconds in 4th I flew past him. Was doing 105 before I knew it.
Some douche in a new 335i came blasting by me on the feeder of I-10, I was cruising at 60, and in a matter of a few seconds in 4th I flew past him. Was doing 105 before I knew it.
#50