CZ Installed on N Flash with Major Mods
#76
The ROM chip on the Harrison version does not read the AFR correctly for the RX8. That's why on Harrison's web page, it says "...for Tunning the RX8, please visit canzoomer.com. " Maurice has corrected the formula for the AFR in jis version. The Harrison version will read the AFR richer than it really is. That is why some of my graphs had the +6 AFR Red Line added to them. It was for safety until I get the correct ROM chip.
You'll have to read your hardware's version number and call Harrison to see.
You'll have to read your hardware's version number and call Harrison to see.
#77
C4 burns real good
iTrader: (4)
hey nemesis, I don't know if you remember me talking about trying to figure out a way tune from my laptop without major cable surgry? well anyways I figured out a way. I unplug the usb cable from the Profec and install an adaptre that I bought from radio shack (USB "B" female - USB "A" female) then just plug the 3' cable that came with the cz (the usb "A" male to "A" male). Works like a champ. Thought you might want to know.
#80
btw, I wondered that is there different A/F reading from same rpm for 3rd and 4th gear pull.
e.g Will the A/F 6k rpm for 3rd gear and 4th gear the same (with the same map of coz).
I really need my canscan soon, still waiting. so many unknown need to find out.
I order mine from cz (the new accurate version), and it will be shipped to me from Dan.
e.g Will the A/F 6k rpm for 3rd gear and 4th gear the same (with the same map of coz).
I really need my canscan soon, still waiting. so many unknown need to find out.
I order mine from cz (the new accurate version), and it will be shipped to me from Dan.
Last edited by nhk; 05-30-2005 at 10:11 PM.
#82
Originally Posted by WantedTwo
the plug for the profec fits in the ecu box thats how I have mine set up. I try to get some pics for you.
#87
Hey, I bought that USB flexible adapter - works perfect. I ran the cable out the back of the ECU box where the rubber gasket is. Next step is to remove the windsheild washer fluid reservoir, and drill the hole that MazdaManiac mentioned so I can run the cable inside the cabin behind the glove box. I have the sCANanlayser on order, so I need to buy the car pc next. I have the S-Video switcher sitting in the garage also. My end result will be logging, mapping, tunning, live digital gauges, etc. right on my NAVI screen. :D
I will need dannobre's help on this project...
I will need dannobre's help on this project...
#88
Boost needed
Join Date: Dec 2003
Location: San Jose, CA
Posts: 2,557
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by r0tor
the previous owner of mine bent the crap out of the programming plug and its actually cracked and ready to fall apart ...
hehe sorry about that
Thread
Thread Starter
Forum
Replies
Last Post
{FS/WTT} 04 Black Rx-8 TRACK AUTOX TIMEATTACK
Billy Marcial
RX-8's For Sale/Wanted
5
03-01-2018 06:50 AM