Mazsport Interceptor- X EMS
#27
Registered User
Join Date: Feb 2006
Location: huntsville, alabama
Posts: 149
Likes: 0
Received 0 Likes
on
0 Posts
well when i follow the directions, and my car gets the main ECU fried. youve got to wonder why it did..... i know i didnt do anything wrong because its just pluggin wires.
Last edited by joshk118; 01-02-2007 at 08:53 PM.
#29
Banned
iTrader: (3)
Originally Posted by joshk118
int-x costed me 1800 bucks to fix my car after it fucked my car up. do not buy this product.
Originally Posted by MazdaManiac the Invincible
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
PCMs are a hearty beast. One of the following scenarios is the reality:
1) You wired the Int-X incorrectly (i.e. power connections backwards)
2) You bent pins on the harness
3) You failed to disconnect the battery NEGATIVE terminal
4) The dealer is selling you a line of crap and it wasn't that actual PCM
1) You wired the Int-X incorrectly (i.e. power connections backwards)
2) You bent pins on the harness
3) You failed to disconnect the battery NEGATIVE terminal
4) The dealer is selling you a line of crap and it wasn't that actual PCM
Originally Posted by MazdaManiac the Generous
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Ahh. Sorry, I missed this part of the story.
You are just some dumb f*cking rich kid.
Sorry I cared.
You are just some dumb f*cking rich kid.
Sorry I cared.
Did you even bother or was that simply too much work for you?
#30
Registered User
Join Date: Feb 2006
Location: huntsville, alabama
Posts: 149
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by MazdaManiac
I'll repeat my answer to you from September the 13th:
and then, my response from September 21st:
So, what was the outcome of the test of the Int-X and the PCM that you sent to Scott?
Did you even bother or was that simply too much work for you?
and then, my response from September 21st:
So, what was the outcome of the test of the Int-X and the PCM that you sent to Scott?
Did you even bother or was that simply too much work for you?
#31
Zoom-Freakin'-Zoom
iTrader: (5)
Originally Posted by joshk118
well since my ECU was fried, there could be no tests run on it. my mom told me that when she went to the dealership to talk to them about what happened, that the guy in the service department showed her the old ECU and told her that there was no information on it. i dont think it could have been tested if it was blank. and i did send the int-x back to scott and he told me that it was fine. so i dunno what the problem was but i really regret trying to make this thing faster than it already is, especially since i dont have much money (im only 17).
fool and his parents money!
beers
#32
Registered User
Join Date: Feb 2006
Location: huntsville, alabama
Posts: 149
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by swoope
so pretty much you still dont know what you are talking about...
fool and his parents money!
beers
fool and his parents money!
beers
how do i not know what im talking about? im saying exactly what the mazda service guy said, so are you saying that he doesnt know what he's talkin about?
it was MY MONEY so stop thinkin im some kid who gets everything and his parents pay for it. my parents didnt want me to get anything that would make my car faster, but i really wanted to get the part. so i saved up 1600 bucks and bought it. it took me almost all summer.
#33
Banned
iTrader: (3)
No - I think what swoope was was pointing out is that you don't listen.
You are like Narcissus, staring at your reflection in the pond and oblivious to everything.
You came here looking for advice. You got excellent advice from a multitude of experienced individuals - to which you ran completely contrary.
Then, you turned around and slammed the one thing around here than is pretty much slam-proof (believe me, I've tried); slam-proof if for no other reason than the highly skilled individual tied to the other end of it is the only person in your equasion that is both taking your money and not lying to you.
Your mom looked at it? That is pathetic!
You own a $30k sportscar and your mom is your technical advisor? Is your mom Janet Guthrie?
No - what we are saying is he is lying to you. Either willful or not, he is not telling you the whole story and neither are you.
You are like Narcissus, staring at your reflection in the pond and oblivious to everything.
You came here looking for advice. You got excellent advice from a multitude of experienced individuals - to which you ran completely contrary.
Then, you turned around and slammed the one thing around here than is pretty much slam-proof (believe me, I've tried); slam-proof if for no other reason than the highly skilled individual tied to the other end of it is the only person in your equasion that is both taking your money and not lying to you.
Your mom looked at it? That is pathetic!
You own a $30k sportscar and your mom is your technical advisor? Is your mom Janet Guthrie?
Originally Posted by joshk118
im saying exactly what the mazda service guy said, so are you saying that he doesnt know what he's talkin about?
#34
Registered User
Join Date: Feb 2006
Location: huntsville, alabama
Posts: 149
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by MazdaManiac
No - I think what swoope was was pointing out is that you don't listen.
You are like Narcissus, staring at your reflection in the pond and oblivious to everything.
You came here looking for advice. You got excellent advice from a multitude of experienced individuals - to which you ran completely contrary.
Then, you turned around and slammed the one thing around here than is pretty much slam-proof (believe me, I've tried); slam-proof if for no other reason than the highly skilled individual tied to the other end of it is the only person in your equasion that is both taking your money and not lying to you.
Your mom looked at it? That is pathetic!
You own a $30k sportscar and your mom is your technical advisor? Is your mom Janet Guthrie?
No - what we are saying is he is lying to you. Either willful or not, he is not telling you the whole story and neither are you.
You are like Narcissus, staring at your reflection in the pond and oblivious to everything.
You came here looking for advice. You got excellent advice from a multitude of experienced individuals - to which you ran completely contrary.
Then, you turned around and slammed the one thing around here than is pretty much slam-proof (believe me, I've tried); slam-proof if for no other reason than the highly skilled individual tied to the other end of it is the only person in your equasion that is both taking your money and not lying to you.
Your mom looked at it? That is pathetic!
You own a $30k sportscar and your mom is your technical advisor? Is your mom Janet Guthrie?
No - what we are saying is he is lying to you. Either willful or not, he is not telling you the whole story and neither are you.
#36
They problem is that when the instructions read "Disconnect the negative power cable from the car's battery", he interpreted that as "Toss your car's PCM into the ocean and let soak for 30 minutes before reinstalling in car, making sure not to disconnect the battery"
#37
Modulated Moderator
iTrader: (3)
Originally Posted by mysql101
They problem is that when the instructions read "Disconnect the negative power cable from the car's battery", he interpreted that as "Toss your car's PCM into the ocean and let soak for 30 minutes before reinstalling in car, making sure not to disconnect the battery"
I hope that my install goes better tomorrow. I have to learn to tune this software before the .......well....can't get too excited
#40
Registered User
Join Date: Feb 2006
Location: huntsville, alabama
Posts: 149
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by MazdaManiac
YOU CAN'T "ERASE" THE PCM.
Even if you could, you would just flash it and be done with it.
Just stop. Please.
Even if you could, you would just flash it and be done with it.
Just stop. Please.
ok someone buy me a interceptor-x and give me 1840 bucks and we can meet up sometime during spring break and i will show you guys what i did. and my car will have to be towed again, and you can personally talk to the service guy and he will tell you that it has been erased. he tried to reflash it but it was completely destroyed.
#42
one of my fuses blew when I installed mine. It seems to be pretty common.
The car wouldn't start after the fuse blew. But it costs about $0.50 for a new one, and takes about 30 seconds to install.
Maybe that's what really happened to you, Josh. So you bought a $1500 fuse.
The car wouldn't start after the fuse blew. But it costs about $0.50 for a new one, and takes about 30 seconds to install.
Maybe that's what really happened to you, Josh. So you bought a $1500 fuse.
#45
Registered User
Join Date: Feb 2006
Location: huntsville, alabama
Posts: 149
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by mysql101
one of my fuses blew when I installed mine. It seems to be pretty common.
The car wouldn't start after the fuse blew. But it costs about $0.50 for a new one, and takes about 30 seconds to install.
Maybe that's what really happened to you, Josh. So you bought a $1500 fuse.
The car wouldn't start after the fuse blew. But it costs about $0.50 for a new one, and takes about 30 seconds to install.
Maybe that's what really happened to you, Josh. So you bought a $1500 fuse.
i checked every fuse like 10 times because scott kept tellin me on the phone that he thought that had to have been the problem and he didnt know what else could have happened.
#46
dude.. its plug and play... that means you plug it in and it works... but there is a catch, you need to hook it up correctly, granted it can be intimidating if you never hooked anything at all up to your car but it should have fit only one way.... so like everyone said to you before "you (no one else) did something wrong"
now i can understand that you are only 17 but the fact of the matter is your interceptor is fine and it was tested to be fine. the dealer mechs for the most part are lost. you are lucky to find 2 mechs that are decent in the state. the person you are talking to (scott) is one of the most knowledgable about the electrical system in the car.... infact there is a video on there website on how to install the int-x. you should look at that and tell us what you did differently. did you do the install or did you have mazda do it?
is your warranty now voided?
now i can understand that you are only 17 but the fact of the matter is your interceptor is fine and it was tested to be fine. the dealer mechs for the most part are lost. you are lucky to find 2 mechs that are decent in the state. the person you are talking to (scott) is one of the most knowledgable about the electrical system in the car.... infact there is a video on there website on how to install the int-x. you should look at that and tell us what you did differently. did you do the install or did you have mazda do it?
is your warranty now voided?
#48
Banned
iTrader: (3)
To get this back on track:
I posted an update to my "Interceptor-X Experiences and Observations" thread:
https://www.rx8club.com/showpost.php...0&postcount=77
I talk about Matrix Mode and how it fixes a bunch of the things about the Int-X that suck.
I posted an update to my "Interceptor-X Experiences and Observations" thread:
https://www.rx8club.com/showpost.php...0&postcount=77
I talk about Matrix Mode and how it fixes a bunch of the things about the Int-X that suck.
#49
Registered User
Join Date: Feb 2006
Location: La Porte, TX
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
I was just wondering... when I end up purchasing my Pettit SC with Int-X will I encounter these problems or will the tune provided be sufficient. If I decide to go the extra mile(which im sure I will) and have Pettit tune the car for me even further than the base tune are they as knowlegable on this subject as yourself ?? I must say im impressed....
Problems Im refering to are typical tuning problems such as leaning out at higher RPMs or running rich at idle like you talked about. Not having a dealer tell me what went wrong like a previous poster stated.... just wanted to clarify
Problems Im refering to are typical tuning problems such as leaning out at higher RPMs or running rich at idle like you talked about. Not having a dealer tell me what went wrong like a previous poster stated.... just wanted to clarify
Last edited by phartknauker; 01-10-2007 at 05:19 PM.
#50
RotoRocks Powered
Originally Posted by phartknauker
I was just wondering... when I end up purchasing my Pettit SC with Int-X will I encounter these problems or will the tune provided be sufficient. If I decide to go the extra mile(which im sure I will) and have Pettit tune the car for me even further than the base tune are they as knowlegable on this subject as yourself ?? I must say im impressed....
Problems Im refering to are typical tuning problems such as leaning out at higher RPMs or running rich at idle like you talked about. Not having a dealer tell me what went wrong like a previous poster stated.... just wanted to clarify
Problems Im refering to are typical tuning problems such as leaning out at higher RPMs or running rich at idle like you talked about. Not having a dealer tell me what went wrong like a previous poster stated.... just wanted to clarify
MM
that is great info.
I will be checking into it ASAP. Thanks for doing all the work.