pluto

Hey Guys,
This is Steven Kan from Gotham Racing. As some of you may know, I'm getting the pro dealer license for accessport for Subaru, Rx8 and 350Z/G35 (when available). The program/software should be here within the next week. I'm looking for someone in DFW area who is currently running the accessport so that I can create a basemap for the car. If you do not have an accessport, I can sell you one.

If you are interested, I'm offering a one time free tuning (including dyno tuning) if you can come to us and allow me to create a good map for the vehicle. I may need your car for a few days to create a few maps based on fuel octane level and driveablility.

Additionally, Once I established the map, we will offer the map for all access port purchase from us.

Let me know if there is anyone interested in this? You can contact me via the following:

Steve@gothamracing.com
PM me (pluto)
or phone (817) 788-8726

thanks again.

Steven Kan

zoom44

ROAD TRIP!!


[planning ]lets see...... i can probably pick up the access port in........ ?Uta..... on my way to DFW. now How to explain the absence to my wife.... Suppose i could stay with Fred or Alan or Jon......... probably Jon since he's who i always crash with.......[/planning?]

BigRed

I wish...

J8635621

iTrader: (10)

Did you ever find one? If not, I might be able to help you out. PM me

pluto

Just had the opportunity to pro tune Jonathan's Rx8 (j8635621) today. We spent approximately 4 hrs today playing around with different settings and learning the Pro tuner software. We also estabilshed some baseline pull between each maps that was on his accessport. All we did was load the map and made dyno pulls to compare the difference between each map. The only mod with the car was the intake and exhaust. Jonathan can probably provide the info on the brand of his mods. Below are the dyno results. Please note that all dyno results were done in a mustang dyno (approx 5-8% lower than the dynojet numbers).

MM stage 1 map (169rwhp, 125rwtq)
Stock map (171rwhp, 124rwtq)
Cobb stage 1 Map (171rwhp, 124rwtq)
Gotham stage 1 map (184rwhp, 124rwtq)

The tune was done after spending 3 hrs of playing with different areas of the map and to also learning the software. I'm sure that I can do this much faster as I get more familiar with it.

Again, I like to thank Janathan for lending me his car so that I can learn the software.

Regards,

Steve Kan

Razz1

interesting but you can not compare MM stage 1 map to Gotham stage 1

You would need to compare it to a stage2 or 3 map from MM

Stage 1 map is used as a base line to figure out what you want to do.

Also there are several iterations of each stage

devildog1679

MT or AT?

VarneyMazda

either way its still good numbers for intake and exhaust only.

r0tor

iTrader: (1)

can someone post up the dyno sheets... were afr's logged? Very interesting...

J8635621

iTrader: (10)

2005 MT Mazdaspeed Intake and JIC exhaust He said he would post up the dynos later. Oh, and AFRs were logged.

pluto

Hey Jonathan,
which MM stage map did you loaded onto the car orginally? I know we took it off when put the cobb stage 1 map in.

Razz1

Congrats on the tunning.

It shows your a proffessional.

pluto

here're the dyno charts for each map

Please note the following:

black line is the a/f ratio
Red line is the horsepower curve
blue line is teh torque curve

Daemos

As far as I know MM has only released stage 1 maps...when I got my AP he only gave me stage 1 maps.

lastphaseofthis

any updates from steve kan?

TeamRX8

iTrader: (25)

an update from 2008?

try picking up the phone and calling the number he posted maybe ...

WTBRotary!

iTrader: (6)

lol... awesome....

lastphaseofthis

And that would be most retarded thing, i've ever heard. i'm not a potential customer of his, so why would i waste his time on the phone, just to ask, "hey man, you still been tuning some rx-8s" besides, i don't need steven kan's reply to state whether or not he is still tuning rx-8s. ANYONE can say, he's no longer tuning them. you know like the people that don't have a life and sit on these forums posting countless post after post..... oh like you.

Internet posts are free. phone calls are not... or how about just plain ol' PREFERANCE.

team, lets meet in a parking lot somewere. pretty please. i'll do my best to remove the stick thats been stuck in your anus. And shove it down your throat.

scremn8

your request for an update sounded like you might be looking to purchase.

TeamRX8

iTrader: (25)

WTF is your problem? Do you have any idea who he is? It was an honest suggestion that often goes overlooked here, particularly given the age of the thread. Maybe you should work on removing your own stick first, then work on acquiring some common sense skills rather than acting out in public with childish physical threats for all the wrong reasons ...

just the same, you can reach him here assuming you ever really cared to know

http://kantuning.com/forum/

lastphaseofthis

Yes i know who steve kan is, I've actually had the pleasure of meeting him serveral years back when he was in orlando for a tuning session.. I was just curious if he was still tuning rx-8s. i do not need tuning services. just thought it was odd he got into it 3 years ago and there hasn't be anything recent with his name on it. i would feel like i was bugging him for something small and trivial, i know hes a busy guy, just like jeff..

was all this EXTRA explanation necassary?

TeamRX8

iTrader: (25)

I don't know WTF my problem is, lol

I'm sure he wouldn't consider it a waste of time for you to let people know there are alternatives. He is in fact a licensed Cobb Protuner rep and he does tune RX-8. His shop is now on the north side of Dallas in Lewisville, TX.

Galen Darkmoon

http://www.prtperformance.com/