Oil Metering Pump Tuning with Interceptor-X/Microtech
#76
Good luck and I am sure you will have a lot of people anxious to hear about your discoveries and results. ![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
Are you aware of the manner in which it is said that Mazsport modified the Microtech? That info may help you along.
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
Are you aware of the manner in which it is said that Mazsport modified the Microtech? That info may help you along.
#77
Registered
Thread Starter
I didn't really look into it. My understanding is the Microtech has complete control of fuel and timing and the stock PCM controls the rest. Is that correct?
thewird
thewird
Last edited by thewird; 09-09-2009 at 11:45 AM.
#79
We first have to distinguish whether you plan on using an unmolested Microtech or plan on using an Interceptor-X. Scott made some internal changes, from what my partner MazdaManiac has told me, and rewired the Microtech so as to turn it into the "Interceptor-X". Once we establish which unit you will be using we can move the conversation forward a bit.
#80
Registered
Thread Starter
Yes, you can tune the split, however, only by RPM and not load which was a little unfortunate as I like giving it less split at vacuum/low boost levels.
It is the Interceptor-X as it has the Mazsport badging and such. I just refer to it as the Microtech because you use the same software and its pretty much the same as far as I can tell. To be honest, I thought the only thing involved in the Interceptor-X was the patch harness that wired into the stock PCM.
thewird
It is the Interceptor-X as it has the Mazsport badging and such. I just refer to it as the Microtech because you use the same software and its pretty much the same as far as I can tell. To be honest, I thought the only thing involved in the Interceptor-X was the patch harness that wired into the stock PCM.
thewird
#81
It is my understanding, and I am sure MM will correct me if I am wrong, that Mazsport internally changed the injector staging or something. I do remember MM being a bit frustrated in his tuning of Phil's (Phil's 8) and Tommy's (T-Diddy) cars, although his outcome with Tommy's car was much better than Phil's car. Tommy is turbo'd and Phil is supercharged.
#82
Registered
Thread Starter
That might be the Aux output (sequential+Aux) for secondary injectors that the unit came with as default. Which basically is a fuel table that ONLY controls the secondary injectors. Supposedly to make the car transition smoother.
However, I disabled this and set it back to sequential so the staging now works as Microtech designed it as I didn't think having 2 separate fuel tables controlling primaries and secondaries was the correct way to go about it.
I'm not sure if this is what MM was referring to though.
thewird
However, I disabled this and set it back to sequential so the staging now works as Microtech designed it as I didn't think having 2 separate fuel tables controlling primaries and secondaries was the correct way to go about it.
I'm not sure if this is what MM was referring to though.
thewird
#83
You may be correct about that and I am sure that once he has a chance, MM will jump in and clear up any errors I may have made. I have to log-off in a minute and hit the road for a couple hours so I will catch ya in a bit.......
Both you guys are tuners. I am just the idiot in BHR who tries to turn the team's ideas into reality.
Both you guys are tuners. I am just the idiot in BHR who tries to turn the team's ideas into reality.
![Lol2](https://www.rx8club.com/images/smilies/lol2.gif)
#84
Zoom-Freakin'-Zoom
iTrader: (5)
That might be the Aux output (sequential+Aux) for secondary injectors that the unit came with as default. Which basically is a fuel table that ONLY controls the secondary injectors. Supposedly to make the car transition smoother.
However, I disabled this and set it back to sequential so the staging now works as Microtech designed it as I didn't think having 2 separate fuel tables controlling primaries and secondaries was the correct way to go about it.
I'm not sure if this is what MM was referring to though.
thewird
However, I disabled this and set it back to sequential so the staging now works as Microtech designed it as I didn't think having 2 separate fuel tables controlling primaries and secondaries was the correct way to go about it.
I'm not sure if this is what MM was referring to though.
thewird
was that not the point and what you laid down the law about?
how did this turn into tuning camp?
maybe start a thread on how to tune with a microtech lt-10.
beers
![Beer](https://www.rx8club.com/images/smilies/beer.gif)
#85
Finally Boosted!!!!!!!
My car ran well using the AP to control the idle, OMP volumes, and the CELs created by the Int-X. The Int-X controls the fuel & timing. The reason for my ECU setup is that I have a top mount T4 turbo kit which doesn't allow for proper MAF mounting. It was designed to work with a MAP based system.
The temp problems can somewhat be overcome by wiring a GM Air Temp sensor into the Int-X and registering the charge temps with it. The only way to overcome the OMP is to reflash or to remove it and premix. The injector staging is different with the Int-X but it sounds like you have that worked out.
It seems like you know what your goal is so keep up the good work. There is more than one way to skin a cat.
The temp problems can somewhat be overcome by wiring a GM Air Temp sensor into the Int-X and registering the charge temps with it. The only way to overcome the OMP is to reflash or to remove it and premix. The injector staging is different with the Int-X but it sounds like you have that worked out.
It seems like you know what your goal is so keep up the good work. There is more than one way to skin a cat.
#87
What makes the S1/S2 OMP different from the S5-S8 RX-7 OMP's? AFAIK, the MoTeC's could run the RX-7 Electronic OMP's.
#88
If you read back, i believe it stated that you can change omp using voltage on RX7 but RX8 OMP is controlled by a stepper motor and is untunable using this method.
Just info gathered from this thread
Just info gathered from this thread
Thread
Thread Starter
Forum
Replies
Last Post
Sifu
RX-8 Parts For Sale/Wanted
3
08-30-2015 10:51 PM