Post your AP "dyno" results
#1
Dongbag extrordinare
Thread Starter
Join Date: Nov 2004
Location: Away from the fruits of my labor
Posts: 1,090
Likes: 0
Received 0 Likes
on
0 Posts
Post your AP "dyno" results
I know the AP dyno feature will never be completely accurate, but just for funsies lets post our results. I did 3 pulls and wrote down the one that "could be" accurate.
349.99 HP @ 8399 rpm
236.55 TQ @ 2677 rpm
-Yambo
349.99 HP @ 8399 rpm
236.55 TQ @ 2677 rpm
-Yambo
#2
Grasshopper
iTrader: (1)
I wonder how close the AP dyno is to a real one.
Here is mine:
232.46HP @ 6802 rpm
182.33TQ @ 5231 rpm
(above numbers changed from original post because these were taken on a flat highway)
Not too bad considering my mods.
I'm also on the MM base tune map, so I'll do a run after each new map and see if anything changes.
Here is mine:
232.46HP @ 6802 rpm
182.33TQ @ 5231 rpm
(above numbers changed from original post because these were taken on a flat highway)
Not too bad considering my mods.
I'm also on the MM base tune map, so I'll do a run after each new map and see if anything changes.
Last edited by Jon316G; 03-01-2009 at 08:05 PM.
#4
Dongbag extrordinare
Thread Starter
Join Date: Nov 2004
Location: Away from the fruits of my labor
Posts: 1,090
Likes: 0
Received 0 Likes
on
0 Posts
Hmm. Did you stop the pull @7k rpm?? Your max HP# should be higher based on the TQ#.
I wonder if we should use vehicle+driver when inputting the vehicle weight
I wonder if we should use vehicle+driver when inputting the vehicle weight
#10
I don't buy Kool-Aid
^Ahh see thats what I was telling my friend Mike they dyno in the UK in 3rd gear there for post different numbers than we do. Thanks for clearing that up for me.
#12
#13
Grasshopper
iTrader: (1)
So my first AP dyno posted above was the first time I tried it.
I wasn't sure how it was going to work and hesitated at the beginning of the log.
Plus, I didn't do this on the highway because my dumbass didn't think about how fast I was going to go in 3rd gear at 7000 rpm
So today on my way to the parent's house I did a few logs on a flat highway and these were my max numbers:
232.46HP @ 6802 rpm
182.33TQ @ 5231 rpm
I did three logs and they varied by about 10, but I don't think you'll ever get three logs with the same data.
I'm curious what Easy comes back with on his Dyno comparison.
I'll do a few more logs on the same stretch of highway I got the above numbers from and see how they compare from day to day.
I wasn't sure how it was going to work and hesitated at the beginning of the log.
Plus, I didn't do this on the highway because my dumbass didn't think about how fast I was going to go in 3rd gear at 7000 rpm
So today on my way to the parent's house I did a few logs on a flat highway and these were my max numbers:
232.46HP @ 6802 rpm
182.33TQ @ 5231 rpm
I did three logs and they varied by about 10, but I don't think you'll ever get three logs with the same data.
I'm curious what Easy comes back with on his Dyno comparison.
I'll do a few more logs on the same stretch of highway I got the above numbers from and see how they compare from day to day.
Last edited by Jon316G; 03-01-2009 at 08:14 PM.
#19
3d gear 2000 to 8000
205.18hp @7894 rpms
147.10tq @5890 rpms
I posted up these numbers the other day. I will do another on my way to work and see if there is any consistency to them....
Like everyone else I was getting some crazy high numbers and found that if you try and start in a higher rpm (higher than 2000 or so) you will see numbers like 380 or 491 NA.
205.18hp @7894 rpms
147.10tq @5890 rpms
I posted up these numbers the other day. I will do another on my way to work and see if there is any consistency to them....
Like everyone else I was getting some crazy high numbers and found that if you try and start in a higher rpm (higher than 2000 or so) you will see numbers like 380 or 491 NA.
#22
#25
Dongbag extrordinare
Thread Starter
Join Date: Nov 2004
Location: Away from the fruits of my labor
Posts: 1,090
Likes: 0
Received 0 Likes
on
0 Posts
I, however, have access to a couple of roads that fit the bill. I will do a 2nd, 3rd, and 4th gear pull and post the results.
-Yambo