Post your AP "dyno" results
03-02-2009, 05:43 PM
#26
Dongbag extrordinare
Thread Starter
Join Date: Nov 2004
Location: Away from the fruits of my labor
Posts: 1,090
Likes: 0
Received 0 Likes
on
0 Posts
Everyone also needs to keep in mind that just as with a "real" dyno, everyone will have different results, even with identical mods/lack thereof.
-Yambo
-Yambo
03-04-2009, 04:10 AM
#29
Registered
Join Date: May 2006
Location: Athens, Greece
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
I updated my accessport firmware and it added the dynamometer submenu in the performance tab, but I cannot use it. When I select it, it gives me an error message that my vehicle is not supported and I should contact cobb.
How can I resolve this?
My rx8 is a EuroDM 2006 mt 4 port model. Is it going to be supported in future updates?
How can I resolve this?
My rx8 is a EuroDM 2006 mt 4 port model. Is it going to be supported in future updates?
03-04-2009, 04:25 AM
#30
3-wheeler
Join Date: Dec 2005
Location: Phoenix
Posts: 2,734
Likes: 0
Received 0 Likes
on
0 Posts
I updated my accessport firmware and it added the dynamometer submenu in the performance tab, but I cannot use it. When I select it, it gives me an error message that my vehicle is not supported and I should contact cobb.
How can I resolve this?
My rx8 is a EuroDM 2006 mt 4 port model. Is it going to be supported in future updates?
How can I resolve this?
My rx8 is a EuroDM 2006 mt 4 port model. Is it going to be supported in future updates?
03-04-2009, 06:05 AM
#31
Registered
Join Date: May 2006
Location: Athens, Greece
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
03-04-2009, 11:52 PM
#33
Like once you log your dyno through the AP, take 10% off (for example) and that is roughly what you MAY get on a real dyno.
But people do need to keep in mind that this is just a fun addition to the AP and shouldn't be taken seriously.
03-05-2009, 12:57 AM
#34
Sorry guys. I was moving and all that was involved with that the last couple of days.
Had to update the firm ware. Then I was resetting the parameters and finally tried it and I'm not sure I did it right. I was talking to MM about it and to be honest he has not looked at it yet.
Maybe I can try it again tomorrow. Trying to find a place where I don't have to worry about the local PD is kind of hard. I'm going to try 2nd gear. And that takes me to 90 mph.
2000 - 9000 rpm
Had to update the firm ware. Then I was resetting the parameters and finally tried it and I'm not sure I did it right. I was talking to MM about it and to be honest he has not looked at it yet.
Maybe I can try it again tomorrow. Trying to find a place where I don't have to worry about the local PD is kind of hard. I'm going to try 2nd gear. And that takes me to 90 mph.
2000 - 9000 rpm
03-05-2009, 01:02 AM
#35
Registered
Join Date: Oct 2008
Location: Montreal,QC
Posts: 2,256
Likes: 0
Received 0 Likes
on
0 Posts
Sorry guys. I was moving and all that was involved with that the last couple of days.
Had to update the firm ware. Then I was resetting the parameters and finally tried it and I'm not sure I did it right. I was talking to MM about it and to be honest he has not looked at it yet.
Maybe I can try it again tomorrow. Trying to find a place where I don't have to worry about the local PD is kind of hard. I'm going to try 2nd gear. And that takes me to 90 mph. 2000 - 9000 rpm
Had to update the firm ware. Then I was resetting the parameters and finally tried it and I'm not sure I did it right. I was talking to MM about it and to be honest he has not looked at it yet.
Maybe I can try it again tomorrow. Trying to find a place where I don't have to worry about the local PD is kind of hard. I'm going to try 2nd gear. And that takes me to 90 mph.
2000 - 9000 rpm90MPH?! Isnt that what 3rd gear does for the manual version?
DAMN.
03-05-2009, 01:20 AM
#37
3-wheeler
Join Date: Dec 2005
Location: Phoenix
Posts: 2,734
Likes: 0
Received 0 Likes
on
0 Posts
03-05-2009, 03:59 PM
#39
Registered
Join Date: May 2006
Location: Athens, Greece
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
I just noticed that my beta firmware is 1.3.1.0 and not 1.3.2.0. Maybe that's why the dyno feature doesn't work!
Is 1.3.2.0 not ready for the european models of accessport?
No matter how many times I tried to update, I stay with version 1.3.1.0-8571!
The beta firmware option is enabled on accessport updater and the beta accessport updater also!
In v1.3.1.0 on cobb site it says that "Users will be asked to re-flash the map to the ECU to activate this. Users with custom maps will need to ask their tuners to resave the maps with AccesTUNER Pro v1.7.0.12"
How can I tell if my tuners maps have been saved with v1.7.0.12 of AccessTuner Pro? Is there a problem if they are saved from a previous version?
Is 1.3.2.0 not ready for the european models of accessport?
No matter how many times I tried to update, I stay with version 1.3.1.0-8571!
The beta firmware option is enabled on accessport updater and the beta accessport updater also!
In v1.3.1.0 on cobb site it says that "Users will be asked to re-flash the map to the ECU to activate this. Users with custom maps will need to ask their tuners to resave the maps with AccesTUNER Pro v1.7.0.12"
How can I tell if my tuners maps have been saved with v1.7.0.12 of AccessTuner Pro? Is there a problem if they are saved from a previous version?
03-05-2009, 04:13 PM
#40
Registered
Join Date: Oct 2008
Location: Montreal,QC
Posts: 2,256
Likes: 0
Received 0 Likes
on
0 Posts
lol... you would probably end up staying at 125mph since 4th goes up to 185!
So that's basically 4th gear for the manual version. Damn, that's just crazy, no wonder their so slow... No offense.
03-05-2009, 04:28 PM
#41
I just noticed that my beta firmware is 1.3.1.0 and not 1.3.2.0. Maybe that's why the dyno feature doesn't work!
Is 1.3.2.0 not ready for the european models of accessport?
No matter how many times I tried to update, I stay with version 1.3.1.0-8571!
The beta firmware option is enabled on accessport updater and the beta accessport updater also!
In v1.3.1.0 on cobb site it says that "Users will be asked to re-flash the map to the ECU to activate this. Users with custom maps will need to ask their tuners to resave the maps with AccesTUNER Pro v1.7.0.12"
How can I tell if my tuners maps have been saved with v1.7.0.12 of AccessTuner Pro? Is there a problem if they are saved from a previous version?
Is 1.3.2.0 not ready for the european models of accessport?
No matter how many times I tried to update, I stay with version 1.3.1.0-8571!
The beta firmware option is enabled on accessport updater and the beta accessport updater also!
In v1.3.1.0 on cobb site it says that "Users will be asked to re-flash the map to the ECU to activate this. Users with custom maps will need to ask their tuners to resave the maps with AccesTUNER Pro v1.7.0.12"
How can I tell if my tuners maps have been saved with v1.7.0.12 of AccessTuner Pro? Is there a problem if they are saved from a previous version?
You will need to have your maps updated to use the new firmware, though.
03-06-2009, 12:06 AM
#47
Registered
Join Date: May 2006
Location: Athens, Greece
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
03-06-2009, 12:22 PM
#49
Registered User
Join Date: Oct 2008
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts