AutoExe CF Splitter kit - Installed/pictures
#1
Spastic Monkey
Thread Starter
Join Date: Mar 2006
Location: Kirkland
Posts: 414
Likes: 0
Received 0 Likes
on
0 Posts
AutoExe CF Splitter kit - Installed/pictures
I went and saw the nice people at Corksport yesterday and they installed the AutoExe CF kit for me. It fits great and it's nice to see the attention to detail that they put into it: most notably the gasket/seal on the side skirts that protect the paint from the skirt rubbing up against it. Nice action.
Here are some pictures I took this morning after washing it really quickly. I was afraid it was going to rain soon so the lighting and whatnot is not ideal. It's now sort of getting sunny out so I'll try to get a few more pictures and post them later this evening.
This kit looks better on the car than it did in any of the pictures I'd seen online. I'm very pleased with this purchase/decision. Now I'd like to drop the nose down a bit and stick some Volks on it.
Here are some pictures I took this morning after washing it really quickly. I was afraid it was going to rain soon so the lighting and whatnot is not ideal. It's now sort of getting sunny out so I'll try to get a few more pictures and post them later this evening.
This kit looks better on the car than it did in any of the pictures I'd seen online. I'm very pleased with this purchase/decision. Now I'd like to drop the nose down a bit and stick some Volks on it.
![](https://www.rx8club.com/attachments/series-i-exterior-appearance-body-kits-27/93116-autoexe-cf-splitter-kit-installed-pictures-front1.jpg)
![](https://www.rx8club.com/attachments/series-i-exterior-appearance-body-kits-27/93117-autoexe-cf-splitter-kit-installed-pictures-front2.jpg)
![](https://www.rx8club.com/attachments/series-i-exterior-appearance-body-kits-27/93118-autoexe-cf-splitter-kit-installed-pictures-front3.jpg)
![](https://www.rx8club.com/attachments/series-i-exterior-appearance-body-kits-27/93119-autoexe-cf-splitter-kit-installed-pictures-front4.jpg)
![](https://www.rx8club.com/attachments/series-i-exterior-appearance-body-kits-27/93120-autoexe-cf-splitter-kit-installed-pictures-front5.jpg)
#3
Spastic Monkey
Thread Starter
Join Date: Mar 2006
Location: Kirkland
Posts: 414
Likes: 0
Received 0 Likes
on
0 Posts
and more.
This is the damage from the recent hit-and-run that some "nice" person did to me in a parking lot. It goes into the body show in two weeks to get fixed. Body shops are booked way out right now around here due to all the snow and ice we had a few weeks ago.
![](https://www.rx8club.com/attachments/series-i-exterior-appearance-body-kits-27/93126-autoexe-cf-splitter-kit-installed-pictures-side2.jpg)
![](https://www.rx8club.com/attachments/series-i-exterior-appearance-body-kits-27/93127-autoexe-cf-splitter-kit-installed-pictures-side3.jpg)
This is the damage from the recent hit-and-run that some "nice" person did to me in a parking lot. It goes into the body show in two weeks to get fixed. Body shops are booked way out right now around here due to all the snow and ice we had a few weeks ago.
![](https://www.rx8club.com/attachments/series-i-exterior-appearance-body-kits-27/93128-autoexe-cf-splitter-kit-installed-pictures-ouch.jpg)
Last edited by TheBri; 01-26-2007 at 02:11 PM.
#5
Very nice!
I was thinking of ordering a kit for my white RX8 but wasn't sure how the back looks. The pictures obviously don't do it any justice but how would you rate the look of it?
From the pictures that I saw before the front lip but especially the back lip looked like they stuck out too much and didn't compliment the body lines too much.
I was thinking of ordering a kit for my white RX8 but wasn't sure how the back looks. The pictures obviously don't do it any justice but how would you rate the look of it?
From the pictures that I saw before the front lip but especially the back lip looked like they stuck out too much and didn't compliment the body lines too much.
#9
Spastic Monkey
Thread Starter
Join Date: Mar 2006
Location: Kirkland
Posts: 414
Likes: 0
Received 0 Likes
on
0 Posts
Right on. Thanks guys.
Yesterday it was overcast hence the lack of light. If it's sunny today I'll get some better pictures. After looking back at the above it's painfully obvious that more light is necessary to fully appreciate what it looks like.
The whole kit looks better in person that it does in any of the pictures I've seen. I'm very pleased with this purchase.
Yesterday it was overcast hence the lack of light. If it's sunny today I'll get some better pictures. After looking back at the above it's painfully obvious that more light is necessary to fully appreciate what it looks like.
Originally Posted by Anton
Very nice!
I was thinking of ordering a kit for my white RX8 but wasn't sure how the back looks. The pictures obviously don't do it any justice but how would you rate the look of it?
From the pictures that I saw before the front lip but especially the back lip looked like they stuck out too much and didn't compliment the body lines too much.
I was thinking of ordering a kit for my white RX8 but wasn't sure how the back looks. The pictures obviously don't do it any justice but how would you rate the look of it?
From the pictures that I saw before the front lip but especially the back lip looked like they stuck out too much and didn't compliment the body lines too much.
#10
Void Where Prohibited
Join Date: Sep 2005
Location: Mineola, TX
Posts: 3,046
Likes: 0
Received 0 Likes
on
0 Posts
I like. I think this kit only looks best with white of maybe yellow. Wheels with an aggressive stance are a must now.
I would also consider the carbon fiber fender inserts to tie the whole thing together.
I would also consider the carbon fiber fender inserts to tie the whole thing together.
![](http://hookupshop.com/project/RX8/Parts/carbonsidegrill.jpg)
#14
Spastic Monkey
Thread Starter
Join Date: Mar 2006
Location: Kirkland
Posts: 414
Likes: 0
Received 0 Likes
on
0 Posts
And then the sun came out. So I took a few pictures on the way home from dyno day in the NW.
I'll take requests on any other shots people want to see of this kit if there is interest. I still think it looks better in person than it does in photos but whatever. That's most likely due to my lack of mad photography skillz.![Dunce](https://www.rx8club.com/images/smilies/dunce.gif)
I'll take requests on any other shots people want to see of this kit if there is interest. I still think it looks better in person than it does in photos but whatever. That's most likely due to my lack of mad photography skillz.
![Dunce](https://www.rx8club.com/images/smilies/dunce.gif)
![](https://www.rx8club.com/attachments/series-i-exterior-appearance-body-kits-27/93191-autoexe-cf-splitter-kit-installed-pictures-light1.jpg)
![](https://www.rx8club.com/attachments/series-i-exterior-appearance-body-kits-27/93192-autoexe-cf-splitter-kit-installed-pictures-light2.jpg)
![](https://www.rx8club.com/attachments/series-i-exterior-appearance-body-kits-27/93193-autoexe-cf-splitter-kit-installed-pictures-light3.jpg)
![](https://www.rx8club.com/attachments/series-i-exterior-appearance-body-kits-27/93194-autoexe-cf-splitter-kit-installed-pictures-light4.jpg)
#15
Spastic Monkey
Thread Starter
Join Date: Mar 2006
Location: Kirkland
Posts: 414
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by XDEEDUBBX
thanks for being original...getting tired of seeing the same stuff over and over again..time for some wheels now!
#21
Registered
#23
Spastic Monkey
Thread Starter
Join Date: Mar 2006
Location: Kirkland
Posts: 414
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by KkKAZzZ
Are you planing on lowering your car?
Originally Posted by rowteree
Originally Posted by gh0st
do you have pics of the pieces before they were put on the car?
#24
Read to succeed please...
Join Date: May 2006
Location: QC, NC
Posts: 248
Likes: 0
Received 0 Likes
on
0 Posts
DAMN!!! You beat me to it... I've been thinkin about goin with this CF splitter set for a hot min. Finally decided to do it, and now I find out that it's been done...
Damn you...
Damn you...
Thread
Thread Starter
Forum
Replies
Last Post
TotalAutoPerformance
Vendor Classifieds
12
10-17-2018 09:00 AM
Learners_Permit
Series I Interior, Audio, and Electronics
8
09-27-2015 07:38 PM
Digitz0070
Series I Aftermarket Performance Modifications
5
09-25-2015 10:58 PM