Notices

Body Kit Suggestions, AIT VS-GT or VIS Magnum

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 07-24-2008 | 06:21 PM
  #1  
Keyten's Avatar
Thread Starter
Registered User
 
Joined: Jul 2007
Posts: 62
Likes: 0
From: Texas
Body Kit Suggestions, AIT VS-GT or VIS Magnum

Hey all,

The RX8 is my first nice car so I've never really looked into body kits before. I think I have narrowed down my choices to either the AIT Racing's VS-GT...

http://www.ilovebodykits.com/product..._Body_Kit.html

or


the VIS Magnum kit...

http://www.ilovebodykits.com/product..._Full_Kit.html


Both are "kock offs" of the Veilside and MS kits.


I was wondering if anyone has anything good or bad to say about these kits. Are the fitments really that much of an issue?

Also, should I buy from a reseller or from the companies site directly?

www.ilovebodykits.com or any of the other body kit sites seem to be cheaper but is the quality of the product any less than if it bought from the AIT or VIS site?

Thanks for any help.
Old 07-24-2008 | 06:27 PM
  #2  
S1lveRx8's Avatar
9K RPM's = ♥♥
iTrader: (1)
 
Joined: Apr 2007
Posts: 220
Likes: 0
From: Oviedo, FL
There is a thread about 6 spots down from this one titled ilovebodykits.com check it out and you be the judge.

Remember you get what you pay for when it comes to body kits. You'll spend the same amount or more just to get it to fit right.
Old 07-24-2008 | 06:29 PM
  #3  
chrism's Avatar
Misfit Moderator TnC
 
Joined: Feb 2005
Posts: 13,309
Likes: 1
From: armpit of the USA
your right they are both kockoffs
Old 07-24-2008 | 07:37 PM
  #4  
jones75254's Avatar
Registered User
iTrader: (2)
 
Joined: Oct 2006
Posts: 1,396
Likes: 0
From: Ohio
Originally Posted by S1lveRx8
There is a thread about 6 spots down from this one titled ilovebodykits.com check it out and you be the judge.

Remember you get what you pay for when it comes to body kits. You'll spend the same amount or more just to get it to fit right.
Exactly. I have learned this the HARD way. Thought i could save a few bucks and still end up with quality.....rarely happens that way, unless you can live with imperfections in fitment or spend a ton of extra $ to get it to fit right.

Save up for another couple months partner, especially if u want to get the authentic MS kit (has warranty). Is freaky expensive but is pretty much plug-n-play kit, unlike most of the rest.
Old 07-24-2008 | 07:39 PM
  #5  
chrism's Avatar
Misfit Moderator TnC
 
Joined: Feb 2005
Posts: 13,309
Likes: 1
From: armpit of the USA
if its your first nice car why would you wanna put garbage on it any way?
Old 07-24-2008 | 10:55 PM
  #6  
NgoRX8's Avatar
Registered
iTrader: (1)
 
Joined: Oct 2004
Posts: 10,239
Likes: 4
From: CA, Rowland Hts.
AIT is somewhat decent, but i still wouldn't put any replica bodykit on my car. If you have to look at replicas because of the price, don't bother, your car will be nicer without it.
Old 07-25-2008 | 12:41 AM
  #7  
Keyten's Avatar
Thread Starter
Registered User
 
Joined: Jul 2007
Posts: 62
Likes: 0
From: Texas
Well I did see where people said ilovebodykits wasn't the way to go. Just from tabbing around the forums I saw where a few people said the VIS kit was good and they had no problems with fitments. I was just wondering if anyone has had any first hand bad/good exp.

I hit a 18 wheeler tire a week ago or so on the freeway so have to get my front bumper replaced anyways. I'll probably go through insurance and just pay the $500 deductible and get a nice front bumper but I'd be stuck paying the bill for the rest of the car.

I'm a college kid and am not made of money so paying $3000 for a full body kit is a little out of my range so I'm trying understand my options a little better.
Old 07-25-2008 | 01:32 AM
  #8  
nvrfalter's Avatar
tonybob failpants
iTrader: (1)
 
Joined: Apr 2008
Posts: 2,270
Likes: 0
From: jersey, BITCH
get the authentic mazdaspeed front. replica sides/rear.
Old 07-25-2008 | 01:48 AM
  #9  
NgoRX8's Avatar
Registered
iTrader: (1)
 
Joined: Oct 2004
Posts: 10,239
Likes: 4
From: CA, Rowland Hts.
^ or even OEM rear aero flares for the rear
Old 07-25-2008 | 11:34 AM
  #10  
VeilSideBrian's Avatar
Registered User
 
Joined: Apr 2007
Posts: 105
Likes: 0
Why "half ***" your project.

If you don't have enough money for quality parts now, why not

A. save up until you can get them
or
B. just leave the car stock
Old 07-25-2008 | 12:07 PM
  #11  
reaper1's Avatar
Registered
 
Joined: May 2006
Posts: 1,040
Likes: 0
From: Chicago Il.
Like everyone has said , get a real one or don't get nothing at all............

My 2 cents ...................
Old 07-27-2008 | 04:14 PM
  #12  
kersh4w's Avatar
Hit & Run Magnet
iTrader: (3)
 
Joined: May 2007
Posts: 6,690
Likes: 3
From: DC Area
no, honestly, i think you should go for the replica kits.

i'll tell you why.

if it fits fine then you can say, "hahah bitches" to everyone on the forums and if it doesnt fit fine and you have to spend a lot of extra money in fitment, well, then you are right where you would be if you bought the authentic pieces.
Old 07-27-2008 | 05:15 PM
  #13  
perks11's Avatar
HEADTURNER
 
Joined: Jan 2007
Posts: 1,100
Likes: 0
From: University of Missouri & STL
^^^ thats funny. but just remember you get what you pay for, so dont be supprised when fitment sucks
Old 07-27-2008 | 05:18 PM
  #14  
thecow135's Avatar
Registered User
 
Joined: Aug 2007
Posts: 493
Likes: 0
Originally Posted by kersh4w
no, honestly, i think you should go for the replica kits.

i'll tell you why.

if it fits fine then you can say, "hahah bitches" to everyone on the forums and if it doesnt fit fine and you have to spend a lot of extra money in fitment, well, then you are right where you would be if you bought the authentic pieces.
haha bitches! i like it
Old 07-27-2008 | 08:33 PM
  #15  
Schimmle's Avatar
El Terrifico
 
Joined: Apr 2008
Posts: 266
Likes: 0
From: Regina, Canada
I got a replica and it fit just fine.Although the guys who put it on weren't the best.
Old 07-27-2008 | 09:19 PM
  #16  
LiL BenNy's Avatar
Bubblicious? DEF.
 
Joined: Mar 2004
Posts: 4,062
Likes: 0
Originally Posted by Schimmle
I got a replica and it fit just fine.Although the guys who put it on weren't the best.
what brand?
Old 07-28-2008 | 01:38 AM
  #17  
Keyten's Avatar
Thread Starter
Registered User
 
Joined: Jul 2007
Posts: 62
Likes: 0
From: Texas
Originally Posted by Schimmle
I got a replica and it fit just fine.Although the guys who put it on weren't the best.
What kit was it?

I've sort of came to terms with the fact that a new kit is going to cost more than expected though. I've been picking up extra shifts and cut back on my beer money.

I think I might go with the Veilside / AIt kit though. I like how it's not ricey but people will notice it's not stock either.
Old 07-28-2008 | 02:04 AM
  #18  
Schimmle's Avatar
El Terrifico
 
Joined: Apr 2008
Posts: 266
Likes: 0
From: Regina, Canada
VIS actually. It only had one corner slightly damaged but it was fixed no prob...and I do mean slightly. Got sides and all. Fit just fine.
Old 07-28-2008 | 11:24 AM
  #19  
kersh4w's Avatar
Hit & Run Magnet
iTrader: (3)
 
Joined: May 2007
Posts: 6,690
Likes: 3
From: DC Area
Originally Posted by Keyten
What kit was it?

I've sort of came to terms with the fact that a new kit is going to cost more than expected though. I've been picking up extra shifts and cut back on my beer money.

I think I might go with the Veilside / AIt kit though. I like how it's not ricey but people will notice it's not stock either.
ah no. veilside is the riciest kit the rx8 has. if rice does it for you, more power to you. it has a gigantic front lip/wing thing.

if you want not ricey, but not stock. go for a mazdaspeed replica. people notice its not stock, but it still has really clean lines. ings is similar to the veilside, but far more tasteful imo. personally, im going for the buddy club kit.
Attached Thumbnails Body Kit Suggestions, AIT VS-GT or VIS Magnum-body-kits-montage.jpg  

Last edited by kersh4w; 07-28-2008 at 11:26 AM.
Old 07-30-2008 | 01:01 PM
  #20  
rx8mod83's Avatar
Lifting Rx8 Society
 
Joined: Mar 2007
Posts: 132
Likes: 0
From: C-Town
LoL why would you buy a body kit from a company called ilovebodykits.. yikes* runs for the door.
Old 07-30-2008 | 02:40 PM
  #21  
Schimmle's Avatar
El Terrifico
 
Joined: Apr 2008
Posts: 266
Likes: 0
From: Regina, Canada
Better than buying one from a company called stinkyholes.com ?!?!?!
Old 07-30-2008 | 11:10 PM
  #22  
Keyten's Avatar
Thread Starter
Registered User
 
Joined: Jul 2007
Posts: 62
Likes: 0
From: Texas
Looks to me like they buy from the companies direct then resell for cheaper. I dont understand why it would be such a bad idea which is why I asked. Seemed like a legit question to me.
Old 07-31-2008 | 01:53 PM
  #23  
magnat_man's Avatar
RX8 customizer
 
Joined: May 2008
Posts: 103
Likes: 0
From: Canada
This front bumper will probably be available soon. I am still waiting confirmation for the group buy.






Let me know by PM if interested and I will PM you as soon as the group buy is started.
Old 07-31-2008 | 02:14 PM
  #24  
9krpmrx8's Avatar
SARX Legend
iTrader: (46)
 
Joined: Jan 2007
Posts: 33,786
Likes: 455
From: San Antonio, Texas
Where can I get that front and how much? Do the lights come with it?
Old 07-31-2008 | 08:26 PM
  #25  
magnat_man's Avatar
RX8 customizer
 
Joined: May 2008
Posts: 103
Likes: 0
From: Canada
It is from me. I will make a group buy soon (waiting information). So if interested, PM me and I will let you know as soon as ready.


You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: Body Kit Suggestions, AIT VS-GT or VIS Magnum



All times are GMT -5. The time now is 05:52 PM.