Notices

Duraflex M-1 Speed wing Fitment?

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 05-04-2020 | 06:33 PM
  #1  
AmrTSG's Avatar
Thread Starter
Registered
iTrader: (1)
 
Joined: Oct 2019
Posts: 36
Likes: 3
From: Halifax, Nova Scotia
Duraflex M-1 Speed wing Fitment?

I've been searching for a Mazdaspeed spoiler lately and i'm just about to give up as these are impossible to find in canada. So i've been looking at the duraflex "m1" spoilers and im a little skeptical, i did some research on here and people are saying that the fitment on the fake ones are disgusting, but that thread was 10 years ago. Has anyone had any experience with these? if they're bad, any suggestions on what to get?



Any help would be appreciated here :D
Old 05-04-2020 | 08:33 PM
  #2  
TeamRX8's Avatar
Registered
iTrader: (25)
 
Joined: Apr 2005
Posts: 26,869
Likes: 2,083
not sure if this is the same one or not

https://www.rx8club.com/new-member-f...5/#post4917412

there’s not a single positive thread on that wing though. You can find the real thing though, but you’re going to pay a good price for it. Which why does it have to be in Canada?
Old 05-04-2020 | 08:48 PM
  #3  
AmrTSG's Avatar
Thread Starter
Registered
iTrader: (1)
 
Joined: Oct 2019
Posts: 36
Likes: 3
From: Halifax, Nova Scotia
Originally Posted by TeamRX8
not sure if this is the same one or not

https://www.rx8club.com/new-member-f...5/#post4917412

there’s not a single positive thread on that wing though. You can find the real thing though, but you’re going to pay a good price for it. Which why does it have to be in Canada?
Those brackets do look like the ones i see in the knockoff M1 spoilers online, i mean the fitment looks good on it. I don't know if i should just go for it and try it out, i have a lot of body work experience but again I'm not an "Expert" and cant just change the whole fitment of the spoiler if its waaay off. I found a couple of used mazdaspeed spoilers (I think they're genuine?)

this ones cracked
https://www.ebay.ca/itm/JDM-Mazda-RX...sAAOSw~sBeK~P-

this one looks decent
https://www.ebay.ca/itm/JDM-04-08-Ma....c100033.m2042

Im still deciding if i should go for the ebay ones or try out the knockoff one. Let me know what you think, if im not asking for too much
Old 05-05-2020 | 01:33 AM
  #4  
TeamRX8's Avatar
Registered
iTrader: (25)
 
Joined: Apr 2005
Posts: 26,869
Likes: 2,083
Not a single person ever said fitment is good

You’re not asking too much, but you didn’t answer my question. I can try to help you kind one, but I’m not in Canada and it likely won’t be found there either, or the likelihood is significantly reduced. It might take a little time, or maybe not, but it really sounds like you’re just itching to spend money asap even if unwisely buying a known unsatisfactory product.
Old 05-05-2020 | 02:07 AM
  #5  
AmrTSG's Avatar
Thread Starter
Registered
iTrader: (1)
 
Joined: Oct 2019
Posts: 36
Likes: 3
From: Halifax, Nova Scotia
Originally Posted by TeamRX8
Not a single person ever said fitment is good

You’re not asking too much, but you didn’t answer my question. I can try to help you kind one, but I’m not in Canada and it likely won’t be found there either, or the likelihood is significantly reduced. It might take a little time, or maybe not, but it really sounds like you’re just itching to spend money asap even if unwisely buying a known unsatisfactory product.
You do have a point there, It doesn't have to be in Canada now that i think about it, I was just looking for something local to avoid the shipping costs and not knowing what the hell i'm going to be getting. I've been looking at this for a while and that's about the only thing i can find. If that link you sent me is that M1 wing, then i wouldnt mind getting that at all, but i can't tell for sure.
Old 05-05-2020 | 11:36 AM
  #6  
TeamRX8's Avatar
Registered
iTrader: (25)
 
Joined: Apr 2005
Posts: 26,869
Likes: 2,083


.
Old 05-05-2020 | 07:53 PM
  #7  
_JB_'s Avatar
Registered
 
Joined: Oct 2019
Posts: 131
Likes: 20
That's my thread linked here. I don't know what model wing I have as it came with the car, but it is a knockoff and fitment is good. However I don't have much faith in the brackets long term, but hell maybe they've been on there for 10 years already. If I was in your shoes I'd spend more and get OEM.

Drivenbymadness just recently made a video with a knockoff Mazdaspeed wing:

Last edited by _JB_; 05-05-2020 at 07:58 PM.
Old 05-07-2020 | 12:59 AM
  #8  
AmrTSG's Avatar
Thread Starter
Registered
iTrader: (1)
 
Joined: Oct 2019
Posts: 36
Likes: 3
From: Halifax, Nova Scotia
Originally Posted by _JB_
That's my thread linked here. I don't know what model wing I have as it came with the car, but it is a knockoff and fitment is good. However I don't have much faith in the brackets long term, but hell maybe they've been on there for 10 years already. If I was in your shoes I'd spend more and get OEM.

Drivenbymadness just recently made a video with a knockoff Mazdaspeed wing:
https://www.youtube.com/watch?v=3EFbs2-HQwM
yeah i watched that, looks decent to me. I guess ill wait a bit and see where it goes i might find a good OEM one
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
youpey
Series I Exterior Appearance and Body Kits
21
11-23-2009 12:50 AM
StyleRide
Series I Exterior Appearance and Body Kits
2
11-02-2008 09:09 AM
~*MizMazda*~
Series I Exterior Appearance and Body Kits
32
01-16-2008 03:50 PM
zenmoused
Series I Tech Garage
5
07-15-2007 05:49 PM
monte
Series I Aftermarket Performance Modifications
19
04-03-2004 04:15 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -5. The time now is 05:20 AM.