Eibach lowered pics and painted emblems!!!
#1
Registered User
Thread Starter
Join Date: Oct 2003
Location: sherwood, Ark
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
![Lightbulb](https://www.rx8club.com/images/icons/icon3.gif)
Here is my friend RX8 with painted emblems and lowered with the eibach springs. He said the springs were a madjor pain to put in and he just sanded the emblems and did those with gun metal paint.
#6
Registered User
Thread Starter
Join Date: Oct 2003
Location: sherwood, Ark
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
he is still painting it, it was a pain to sand. he is going to take the MAZDA off and put the RX8 there, you can cover the holes. so there will be nothing on the right. The rx8 has no holes drilled...all the other ones do.
#10
Registered User
Thread Starter
Join Date: Oct 2003
Location: sherwood, Ark
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
thanks.
The one thing we both dont like about the EIBACH springs is that it doesnt sit even, as you can see the front still sits taller than the back... and when you take off its real bad. He is going to wait for another kit to come out with a lower front.
The one thing we both dont like about the EIBACH springs is that it doesnt sit even, as you can see the front still sits taller than the back... and when you take off its real bad. He is going to wait for another kit to come out with a lower front.
#14
Registered
Join Date: Oct 2001
Location: Boulder County, Colorado
Posts: 7,966
Likes: 0
Received 4 Likes
on
3 Posts
Originally posted by Jag
I love the gunmetal badges. Are there any tricks to getting them off? Do you just yank on them and they pop off or whats the easiest way?
I love the gunmetal badges. Are there any tricks to getting them off? Do you just yank on them and they pop off or whats the easiest way?
#19
Registered User
Thread Starter
Join Date: Oct 2003
Location: sherwood, Ark
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
Ya my Z is low, but I just have to be very carefull. For the emblems, here is instructions on what he did...
Took fishing line and got behind the emblem and used a heat guy and worked with them very easy.
Once off he started sanding, probably 30 per badge to make sure there was a ruff texture.
then bought primer and paint and clear coat that was from the same company. Black primer and gun metal paint and clear coat.
Shot them with primer...let dry for about 30 min and then shot them again to make sure he didnt miss anything.
them once all primed up .... and dry. He put a light coat of paint, cause too much will run. then put about 3 to 4 coats about every hour.
Took fishing line and got behind the emblem and used a heat guy and worked with them very easy.
Once off he started sanding, probably 30 per badge to make sure there was a ruff texture.
then bought primer and paint and clear coat that was from the same company. Black primer and gun metal paint and clear coat.
Shot them with primer...let dry for about 30 min and then shot them again to make sure he didnt miss anything.
them once all primed up .... and dry. He put a light coat of paint, cause too much will run. then put about 3 to 4 coats about every hour.
#22
Registered User
Thread Starter
Join Date: Oct 2003
Location: sherwood, Ark
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
I wanted him to paint them light silver to match the tail lights..but he loves gun metal. I think he went to wal mart or auto zone and got some...it doesnt take much to hold them on.