Fiberglass Fender Vents??
#726
Originally Posted by chr1s
I wouldn't mind having to clip the mesh and slide it behind the frame. It's the fact that there's a clip on the top thats CLEARLY not suppose to be there. If Jay would have spent 10 minutes installing one on an RX-8 he would have seen this problem, and saved us some headache.
what i dont understand is why jay would go thru the trouble of putting an extra tab somewhere. he takes the original and makes a mold of it right, therefore its theoretically an exact copy of the original? that tab is probably there on the original and a pain in the *** just the same
Last edited by scsi; 03-13-2007 at 09:24 PM.
#727
Originally Posted by scsi
what i dont understand is why jay would go thru the trouble of putting an extra tab somewhere. he takes the original and makes a mold of it right, therefore its theoretically an exact copy of the original? that tab is probably there on the original and a pain in the *** just the same
#728
Registered
Join Date: Jul 2006
Location: EVOLV-Chicago
Posts: 437
Likes: 0
Received 0 Likes
on
0 Posts
^ and she answered it already.
Her vents have a clip at the top, from what I understand, she bent the clip back, put the vent in place, then bent the clip around the frame of the hole so it held the top in place.
She posted it a few posts back.
Her vents have a clip at the top, from what I understand, she bent the clip back, put the vent in place, then bent the clip around the frame of the hole so it held the top in place.
She posted it a few posts back.
#729
Registered
Join Date: Jul 2006
Location: EVOLV-Chicago
Posts: 437
Likes: 0
Received 0 Likes
on
0 Posts
here:
Originally Posted by shinka213
2. i had to make an adjustment on the tab up top cuz the vent would not go in...i carefully bent it back away from the edge into a right angle...using needle nose pliers
#732
Pettit fangurl <3
Join Date: Mar 2005
Location: Aston, PA
Posts: 5,386
Likes: 0
Received 0 Likes
on
0 Posts
im sorry.....but i just totally dont understand this install mess.....
my autobahn BRAND vents have the same set up for install and this ole lady (probably old enough to be most of your's mothers) can get the job done without whinin....
what gives here guys???
this shyte is gettin
my autobahn BRAND vents have the same set up for install and this ole lady (probably old enough to be most of your's mothers) can get the job done without whinin....
what gives here guys???
this shyte is gettin
#733
well, I guess I didn't know the Autobahn vents were so shitty.
Then it isn't Jay's fault, it's the fact that Autobahn sucks.
Sweet, I'll refrain from buying any Autobahn parts.
I apologize Jay for ragging on you in the previous posts. I thought that you had just done a half-assed job of making a replica. Thats clearly not the case and autobahns parts are just very sub-par. For the future perhaps you could make improvements to the vents so they fit properly without any modification from the user.
Then it isn't Jay's fault, it's the fact that Autobahn sucks.
Sweet, I'll refrain from buying any Autobahn parts.
I apologize Jay for ragging on you in the previous posts. I thought that you had just done a half-assed job of making a replica. Thats clearly not the case and autobahns parts are just very sub-par. For the future perhaps you could make improvements to the vents so they fit properly without any modification from the user.
#734
Pettit fangurl <3
Join Date: Mar 2005
Location: Aston, PA
Posts: 5,386
Likes: 0
Received 0 Likes
on
0 Posts
Chris....
i think you have totally missed the point im trying to make here...
the design of these vents precludes any real easy or "plug and play", if you will, installation process...it just cant happen....
as far as autobahn making shitty stuff.....I disagree,,,,my fender vents are freakin ridiculously saweet....
i think you have totally missed the point im trying to make here...
the design of these vents precludes any real easy or "plug and play", if you will, installation process...it just cant happen....
as far as autobahn making shitty stuff.....I disagree,,,,my fender vents are freakin ridiculously saweet....
#736
Originally Posted by shinka213
Chris....
i think you have totally missed the point im trying to make here...
the design of these vents precludes any real easy or "plug and play", if you will, installation process...it just cant happen....
as far as autobahn making shitty stuff.....I disagree,,,,my fender vents are freakin ridiculously saweet....
i think you have totally missed the point im trying to make here...
the design of these vents precludes any real easy or "plug and play", if you will, installation process...it just cant happen....
as far as autobahn making shitty stuff.....I disagree,,,,my fender vents are freakin ridiculously saweet....
But, I ask you, why can't a plug and play installation happen? Clearly Au-to Bahn just put out a product as quickly as they possibly could with no real engineering involved. They've entered the realm of gReddy in my mind.
So, honestly tell me, why couldn't you design a vent that looks exactly like the au-to bahn one yet be as easy to install and high quality as the mazda one?
#740
www.EVO-R.Net
iTrader: (2)
Join Date: Jun 2004
Location: New York
Posts: 852
Likes: 0
Received 0 Likes
on
0 Posts
I think I would have the factory direct mold the mesh in the vents itself. This will be easier for you guys to install and won't cut your hand. =) Less work for you more work for us.
#741
i would prefer to be able to put my own mesh. if you can get it to fit perfectly without mesh at all, then i think that would be good. leave the mesh to us.
so what about cf? any time soon?
so what about cf? any time soon?
#742
Registered
Join Date: Jul 2006
Location: EVOLV-Chicago
Posts: 437
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by fd3s777
I think I would have the factory direct mold the mesh in the vents itself. This will be easier for you guys to install and won't cut your hand. =) Less work for you more work for us.
#743
www.EVO-R.Net
iTrader: (2)
Join Date: Jun 2004
Location: New York
Posts: 852
Likes: 0
Received 0 Likes
on
0 Posts
Okay guys... Just bought a damged RX-8. Going to drop the engine and tranny and put RX-7 13B TT engine on it... Anyway I had a chance to put on the vents myself. The very top metal bracket need to be remove in order to fit. I just test fit woth out the mesh. The other side fender is gone so cannot test fit.
Clearly alot of space for the mesh to put on...
Clearly alot of space for the mesh to put on...
#748
wow forgot all about this thread : ..........I never even posted pics of my setup...
all I have to say is that I had no fitment issues and the vents turned out great....especially with the glossy finish I had done....
welli did have problems with the mesh....but other than that the pieces fit like stock and felt secure....then again I did secure them differently ....
but overall I would say 8/10 ...simply because one point is being taken off for the mesh...and another because on my left fender vent it feels like one of the openings is a little long...but thats only if I get up really close...will measure the bottom holes on each side to see if its just me...or if its really just slightly off...
also will finally get pics up after I finish with spring break....
also look for the G37 spy pics I got while I was out in Arizona
all I have to say is that I had no fitment issues and the vents turned out great....especially with the glossy finish I had done....
welli did have problems with the mesh....but other than that the pieces fit like stock and felt secure....then again I did secure them differently ....
but overall I would say 8/10 ...simply because one point is being taken off for the mesh...and another because on my left fender vent it feels like one of the openings is a little long...but thats only if I get up really close...will measure the bottom holes on each side to see if its just me...or if its really just slightly off...
also will finally get pics up after I finish with spring break....
also look for the G37 spy pics I got while I was out in Arizona