Great ATH replica bumpers
#52
RX8 customizer
Thread Starter
Join Date: May 2008
Location: Canada
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
The material is fibreglass but we use 2 different resin. The resin used for the higher part of the bumper is very strong to have good fit, and the resin used for the lower part (lip) is a flexible resin.
The leadtime for production will be around 2-3 weeks.
The leadtime for production will be around 2-3 weeks.
#53
RX8 customizer
Thread Starter
Join Date: May 2008
Location: Canada
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
#64
RX8 customizer
Thread Starter
Join Date: May 2008
Location: Canada
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
#74
RX8 customizer
Thread Starter
Join Date: May 2008
Location: Canada
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
The bumper is designed to be only 1/2" lower than stock. With the stock spring, the lower point of the bumper is 5.5" high to the ground.
The distance between the bottom of the bumper and the bottom of the corner light is 17.5". The distance between the ground and the bottom of the corner light is 24".
All the plastic parts under the engine bay fit as stock. The plastic inside the wheel area also fit as stock with the bumper (see the picture on the first page, I have one showing the fit in the wheel area).
The distance between the bottom of the bumper and the bottom of the corner light is 17.5". The distance between the ground and the bottom of the corner light is 24".
All the plastic parts under the engine bay fit as stock. The plastic inside the wheel area also fit as stock with the bumper (see the picture on the first page, I have one showing the fit in the wheel area).
#75
RX8 customizer
Thread Starter
Join Date: May 2008
Location: Canada
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
New Product Launch Strategy
15 SEPTEMBER 2008 NEW PRODUCT LAUNCH STRATEGY.
PM HAS BEEN SENT TO EVERY PERSON WHO ASKED FOR DETAILS BEFORE.
1. STEALTHTL Model to fit lights + Grille
2.
3.
4.
5.
6.
7.
8.
9.
10.
...
PM HAS BEEN SENT TO EVERY PERSON WHO ASKED FOR DETAILS BEFORE.
1. STEALTHTL Model to fit lights + Grille
2.
3.
4.
5.
6.
7.
8.
9.
10.
...