hydraulic lift kits?
#4
Registered
iTrader: (7)
Come on...Seriously? A hydraulic lift kit? haha.... I'm gonna do you a favor before you really get flamed on here lol... If the car is too low for a daily driver or whatever your reason may be buy a set of coilovers, they are height adjustable and you can raise the car to the height you want. Why in the hell would you put hydraulics in an RX-8...IT'S A SPORTS CAR!!! Sometime these threads really amaze me.
#5
Registered RX8 Nut
iTrader: (11)
The only hydraulic system I would consider is from KW. http://www.kw-suspension.com/us/kw_hls.php
I like the idea in theory but with added weight and depending on cost I don't think I would ever do it. It would be nice to never go sideways over speed bumps or up/down driveways. My MS body kit is 1" lower and I have a 1" drop so I'm usually ok bt I just have to be careful.
I like the idea in theory but with added weight and depending on cost I don't think I would ever do it. It would be nice to never go sideways over speed bumps or up/down driveways. My MS body kit is 1" lower and I have a 1" drop so I'm usually ok bt I just have to be careful.
Last edited by Highway8; 11-25-2010 at 02:01 AM.
#6
Registered
iTrader: (15)
![CA](https://www.rx8club.com/images/icons/ca.jpg)
The only hydraulic system I would consider is from KW. http://us.kwsuspension.de/us/kw_hls.php
I like the idea in theory but with added weight and depending on cost I don't think I would ever do it. It would be nice to never go sideways over speed bumps or up/down driveways. My MS body kit is 1" lower and I have a 1" drop so I'm usually ok bt I just have to be careful.
I like the idea in theory but with added weight and depending on cost I don't think I would ever do it. It would be nice to never go sideways over speed bumps or up/down driveways. My MS body kit is 1" lower and I have a 1" drop so I'm usually ok bt I just have to be careful.
expensive though.
Last edited by Twiztog43; 11-22-2010 at 02:49 AM.
#8
If anything I'd do air, hydros are messy and there's a lot of extra weight involved in batteries and lines and fluid and really it's all a huge pain in the ****. I've got a custom air ride on mine and it does the job, car still handles just fine contrary to what people seem to think. I'm in the process of saving up enough to re-do it all and when I'm done I'll have the best of both worlds (handling and aesthetics) and awesome ride quality to boot.
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
#9
LOL. its fine to get flamed i don't mind it. i'd prefer to be able to adjust the height to lower it at times and then be able to enter carparks by highering it on the spot. im not familiar with what does what which is why im here askin for help. what would you guys recommend? thanks
#10
Metatron
iTrader: (1)
Hydraulic systems tend to be 'fixed' at whatever height they are - there is no "give".
You sacrifice the shock absorber, and replace it with a hydraulic piston, that doesn't move at all. No shock absorbing, no bounce, I've been in lowriders that would crash so bad on a driveway, the sunvisors would both drop down.....
Air shocks are adjustable by pressure to lift the vehicle, but still compress on a pothole. Hydraulics have no such flex, they are solid.
But they do go up and down.......
You sacrifice the shock absorber, and replace it with a hydraulic piston, that doesn't move at all. No shock absorbing, no bounce, I've been in lowriders that would crash so bad on a driveway, the sunvisors would both drop down.....
Air shocks are adjustable by pressure to lift the vehicle, but still compress on a pothole. Hydraulics have no such flex, they are solid.
But they do go up and down.......
#13
X e p i A
iTrader: (1)
What about a product like this:
http://www.umbrellaautodesign.com/co...ed_design.html
It's a universal kit that works with many existing coilovers.
"In the collapsed state(set ride height) this device will not affect the handling of your vehicle whatsoever as it acts merely as a metal spacer.
When you engage the valves air is sent to the piston and the vehicle can be raised up to 5" DEPENDING ON APPLICATION, LIFT AMOUNT WILL VARY PER VEHICLE AND COILOVER UTILIZED to help navigate steep driveways,towtruck beds, speed bumps etc."
http://www.umbrellaautodesign.com/co...ed_design.html
It's a universal kit that works with many existing coilovers.
"In the collapsed state(set ride height) this device will not affect the handling of your vehicle whatsoever as it acts merely as a metal spacer.
When you engage the valves air is sent to the piston and the vehicle can be raised up to 5" DEPENDING ON APPLICATION, LIFT AMOUNT WILL VARY PER VEHICLE AND COILOVER UTILIZED to help navigate steep driveways,towtruck beds, speed bumps etc."
#15
X e p i A
iTrader: (1)
Well, this kit works with coilovers, so it's $3000 + the price of the coilovers, but if you absolutely need height adjustment at the touch of a button but don't want to sacrifice handling... and you have a lot of extra cash lying around, something like this might work pretty well.
#17
X e p i A
iTrader: (1)
It sounds like the OP already has coilovers and may have said "hydraulics" out of ignorance. The product I posted may be exactly what he's looking for.
Last edited by Aipex8; 11-25-2010 at 01:54 PM.
#18
just checked the product and it looks abit pricey but will consider it still after i check out my remaining options. sadly i dont have any coilovers yet so to get that product i'd need to get coilovers on top... is there anything else that would give me touch of a button height adjustment?
#19
Official Post Whore
iTrader: (2)
Entering my driveway I have less then 1/4" of clearance. It is scary how close it is. Not that I would pay $3k for this but that is besides the point. Something like this is all about protecting your ride when going over bumps and entering and exiting driveways and parking lots.
#20
haha thats the whole point i suppose. i can't enter a single driveway atm. and underground parking areas will just destroy the front bumper off. i've already damaged it which is why i'd like to keep the looks tho be able to drive over the humps and driveways.
#22
I drive at Red Line.
iTrader: (1)
I can understand lowering the vehicle. But I would never lower a daily driver to where I couldn't drive it. If its a track car, and your not running at a track with a bump you should be ok. But if your taking this vehicle on the streets, you should have only lowered it an inch at the most. If you were going to do 1.5 to 2 inches of lowring you should have gone with adjustable coil overs.
#23
cars drivable with care on the streets. i suppose flat driveways i can enter but still pretty much uncomfortable. thanks for the advice and all but is there any other solutions to it?