IPT TrueMold Carbon Fiber engine cover is here PICS
03-15-2004 | 02:51 PM
#1
Thread Starter
Forum Vendor
Joined: Jan 2004
Posts: 109
Likes: 0
From: iptmotorsports.com
IPT TrueMold Carbon Fiber engine cover is here PICS
************************************************** **
************************************************** **
Due to Popular Demand We have The Pre-Buy sale Extended Untill
3-24-04 Sale will be closed at then end of the day !!!!!!! So get
your orders in A.S.A.P.
All Covers that have the Jap 4 Piece Strut bar have no Worries
we have trimmed certain sections of the Cover so it will Fit Perfect
Those that wanted me to extend the sale here you go. :-)
IPT
************************************************** **
************************************************** **
The pitures are finally up!
Get your orders in A.S.A.P.
Your comments about the engine cover are encouraged.
The Pre-Market Special is still $235 with shipping included.
Many of you have already ordered the cover; and now that the pitures are posted on the Web many more of you will want to get in on this deal also.
Orders need to be placed quickly-- before the price increases.
(The price could change by the end of the week)
Go to this link to order
https://www.rx8club.com/showthread.p...threadid=19434
Enjoy the pics
The picture of the backside of the part shows you that this is TrueMold carbon fiber and not a Wet-Layup over fiberglass ..
If it was a Wet-Layup you would see chopped fiberglass, smooth fiberglass, or just plastic
I have seen a couple of RX-8 covers out there that are the original plastic piece covered in Carbon fiber !!! YUCK !!!
Unlike some others sold on market, this IPT product is TrueMold carbon fiber. It contains thermoset resin so it will hold up to heat and will not yellow.
THERE IS NO CLEARCOAT ON THIS PART
Also : Guys Please Remember this part is a Replacement piece
It DOES NOT COVER YOUE ORIGIANL COVER !!!!!!!!!!!!!!!!
Take off the old and replace with the new !!!!!
Parker
www.iptms.com
************************************************** **
Due to Popular Demand We have The Pre-Buy sale Extended Untill
3-24-04 Sale will be closed at then end of the day !!!!!!! So get
your orders in A.S.A.P.
All Covers that have the Jap 4 Piece Strut bar have no Worries
we have trimmed certain sections of the Cover so it will Fit Perfect
Those that wanted me to extend the sale here you go. :-)
IPT
************************************************** **
************************************************** **
The pitures are finally up!
Get your orders in A.S.A.P.
Your comments about the engine cover are encouraged.
The Pre-Market Special is still $235 with shipping included.
Many of you have already ordered the cover; and now that the pitures are posted on the Web many more of you will want to get in on this deal also.
Orders need to be placed quickly-- before the price increases.
(The price could change by the end of the week)
Go to this link to order
https://www.rx8club.com/showthread.p...threadid=19434
Enjoy the pics
The picture of the backside of the part shows you that this is TrueMold carbon fiber and not a Wet-Layup over fiberglass ..
If it was a Wet-Layup you would see chopped fiberglass, smooth fiberglass, or just plastic
I have seen a couple of RX-8 covers out there that are the original plastic piece covered in Carbon fiber !!! YUCK !!!
Unlike some others sold on market, this IPT product is TrueMold carbon fiber. It contains thermoset resin so it will hold up to heat and will not yellow.
THERE IS NO CLEARCOAT ON THIS PART
Also : Guys Please Remember this part is a Replacement piece
It DOES NOT COVER YOUE ORIGIANL COVER !!!!!!!!!!!!!!!!
Take off the old and replace with the new !!!!!
Parker
www.iptms.com
Last edited by IPT; 03-22-2004 at 03:16 PM.
03-15-2004 | 03:17 PM
#5
Thread Starter
Forum Vendor
Joined: Jan 2004
Posts: 109
Likes: 0
From: iptmotorsports.com
Originally posted by Spin9k
Any other underhood parts or interior parts? Thanks. That cover is beautiful
ps your website is a little funky, pics not showing, slow loading even w/3mbit connection.
Any other underhood parts or interior parts? Thanks. That cover is beautiful
ps your website is a little funky, pics not showing, slow loading even w/3mbit connection.
Yes we will be doing in the future be doing other parts under the hood
we just wanted to knock out the most difficult one first...
Strange about the site it must be yahoo
parker
03-15-2004 | 06:52 PM
#8
Mr. Blue Man
Joined: Dec 2003
Posts: 887
Likes: 0
From: Carmel, IN
Parker,
Gees O pete that looks SWEET! Glad I'm in the pre-buy. Now for the question you know us pre-buyers are dying to know. .. any idea when you will be shipping? Should like nice at the rotary revolution!
Seriously, nicely done.
Gees O pete that looks SWEET! Glad I'm in the pre-buy. Now for the question you know us pre-buyers are dying to know. .. any idea when you will be shipping? Should like nice at the rotary revolution!
Seriously, nicely done.
03-15-2004 | 08:44 PM
#9
Originally posted by IPT
Yes we will be doing in the future be doing other parts under the hood
we just wanted to knock out the most difficult one first...
Yes we will be doing in the future be doing other parts under the hood
we just wanted to knock out the most difficult one first...
or a cover for the bottom lip on the mazdaspeed sideskirts...
03-15-2004 | 11:02 PM
#13
Mr. Blue Man
Joined: Dec 2003
Posts: 887
Likes: 0
From: Carmel, IN
Originally posted by ranger4277
Too bad you won't be the only one at RR with one Whealy!
Too bad you won't be the only one at RR with one Whealy!
Hey, the more the better. Besides I'm pretty sure we will be way outnumberd by "7"'s ... this year. Look forward to meeting upo with ya. Oh and thanks for reminding me to set my sig after seeing yours.
03-16-2004 | 12:43 AM
#17
Registered User
Joined: Feb 2004
Posts: 470
Likes: 0
From: Fremont, California
hi Parker,
can you please attach pics w/ the cover over the stock strut tower brace and over the MS strut tower brace? I am looking to see that it fits w/ both braces and would also like to see what the MS carbon fiber and your carbon fiber look like right next to each other.
Also, does this new cover fit over the MS japanese 4 point strut tower brace?
can you please attach pics w/ the cover over the stock strut tower brace and over the MS strut tower brace? I am looking to see that it fits w/ both braces and would also like to see what the MS carbon fiber and your carbon fiber look like right next to each other.
Also, does this new cover fit over the MS japanese 4 point strut tower brace?
03-16-2004 | 01:22 PM
#20
Thread Starter
Forum Vendor
Joined: Jan 2004
Posts: 109
Likes: 0
From: iptmotorsports.com
Guys and Gals all questions about other parts Please post in my Forum I dont want to get this off topic This is about the RX-* Engine cover Only
Forum: https://www.rx8club.com/a-69/
P
Forum: https://www.rx8club.com/a-69/
P
03-16-2004 | 02:17 PM
#21
Registered
Joined: Oct 2001
Posts: 7,966
Likes: 4
From: Boulder County, Colorado
Wow. I'm not even generally that big of a fan of Carbon Fiber - I think of it as more of a fashion thing that, like bell bottoms pants or punk rock (to cover several generations) will be out of style soon - but I gotta say, that cover is freakin GEORGEOUS! Well done, Parker!
03-16-2004 | 04:04 PM
#22
Registered User
Joined: Aug 2003
Posts: 141
Likes: 0
From: Austin, TX
It looks dam nice. But ... how much will the other components approx cost ? I wouldnt want to buy just this and have my engine covers be mismatched, would I ? A car fashion faux paux! Don't want to find out the other two small ones are 500 a pop.
03-16-2004 | 04:37 PM
#23
Thread Starter
Forum Vendor
Joined: Jan 2004
Posts: 109
Likes: 0
From: iptmotorsports.com
Originally posted by boarder
It looks dam nice. But ... how much will the other components approx cost ? I wouldnt want to buy just this and have my engine covers be mismatched, would I ? A car fashion faux paux! Don't want to find out the other two small ones are 500 a pop.
It looks dam nice. But ... how much will the other components approx cost ? I wouldnt want to buy just this and have my engine covers be mismatched, would I ? A car fashion faux paux! Don't want to find out the other two small ones are 500 a pop.
They will be way Cheap !!!! Not even close to 500.00 Or 200.00
I will be selling them as a package
the will be very cheap
Trust Me
Parker