Mix & Match Body Kit Info/Questions
10-20-2003 | 08:23 PM
#52
Registered User
Joined: Aug 2003
Posts: 103
Likes: 0
From: Atlanta, GA
Originally posted by mikeb
congrats
was it japanparts.com again
you car looks great man
congrats
was it japanparts.com again
you car looks great man
Thanks, I think I am done with the big stuff. Now to do some of the lights you did.
10-21-2003 | 04:17 AM
#55
[rapidus octus]
Joined: Aug 2003
Posts: 1,028
Likes: 0
From: Sydney, Australia
hey goodyrx8,
Please tell me about that lower lip on the MS skirts.
The MS skirts look very functional, but not particulary stylish - IMO. As my 8's going to be spending most of it's time at sub warp speeds, I'm temped to hunt down something else or wait a little.
If it's at all possible, can you give us a rear quarter shot?
Kev.
Please tell me about that lower lip on the MS skirts.
The MS skirts look very functional, but not particulary stylish - IMO. As my 8's going to be spending most of it's time at sub warp speeds, I'm temped to hunt down something else or wait a little.
If it's at all possible, can you give us a rear quarter shot?
Kev.
10-21-2003 | 08:47 PM
#57
Registered User
Joined: Aug 2003
Posts: 103
Likes: 0
From: Atlanta, GA
Originally posted by Kev
hey goodyrx8,
Please tell me about that lower lip on the MS skirts.
The MS skirts look very functional, but not particulary stylish - IMO. As my 8's going to be spending most of it's time at sub warp speeds, I'm temped to hunt down something else or wait a little.
If it's at all possible, can you give us a rear quarter shot?
Kev.
hey goodyrx8,
Please tell me about that lower lip on the MS skirts.
The MS skirts look very functional, but not particulary stylish - IMO. As my 8's going to be spending most of it's time at sub warp speeds, I'm temped to hunt down something else or wait a little.
If it's at all possible, can you give us a rear quarter shot?
Kev.
10-22-2003 | 07:01 PM
#58
Registered User
Joined: Aug 2003
Posts: 141
Likes: 0
From: Austin, TX
Could you got out and buy an MS front grill and put it on that car now please ? ... heh ... I've been wanting to see a MS kit with the stock wing swapped in for the MS wing. Your oh so close .... I mean, its all about my needs on this forum, right 
BTW, I like the MS sideskirts much better than the mazda package ones. We should call the mazda ones "short-skirts" or something since they aren't really complete.
BTW, I like the MS sideskirts much better than the mazda package ones. We should call the mazda ones "short-skirts" or something since they aren't really complete.
You're rx-8 looks fresh goody!! I really like it!!
How much did it cost you ...the front appearance package, the ms side skirts..etc??
10-22-2003 | 08:08 PM
#60
100% Italian
Joined: Jul 2003
Posts: 9,422
Likes: 0
From: orange,ca
Originally posted by boarder
BTW, I like the MS sideskirts much better than the mazda package ones. We should call the mazda ones "short-skirts" or something since they aren't really complete. [/B]
BTW, I like the MS sideskirts much better than the mazda package ones. We should call the mazda ones "short-skirts" or something since they aren't really complete. [/B]
x-mobile the front air dam is like 300 and the ms sides are like 1k
10-22-2003 | 09:33 PM
#61
Registered User
Joined: Aug 2003
Posts: 141
Likes: 0
From: Austin, TX
mini-skirts.... thats the word for them. I can't believe I didn't think of that word when I posted earlier. Oh well, I nominate that word from now on.
I'd like to see a closeup of the MS skirts if you get the chance. Especially the lower ridge if possible. Oh, and thanks for the pics you've taken.
I'd like to see a closeup of the MS skirts if you get the chance. Especially the lower ridge if possible. Oh, and thanks for the pics you've taken.
12-05-2003 | 11:15 AM
#64
Registered User
Joined: Sep 2003
Posts: 68
Likes: 0
From: Callaway, MD
Mismatch
I love the MS front bumber so would probably save up and shell out to get it. However, i wonder if i can buy the sideskirt from another kit and use it instead of spending 1k+ for the ms side skirt. Any suggestion would be appreciated.:D
12-07-2003 | 03:27 AM
#67
RX8 HA HA
Joined: Aug 2003
Posts: 11,772
Likes: 5
From: Gardena Cali 310
Originally posted by pyrospawn
I think what's worry me most is that if the sideskirt and bumber from different body kits will have difference ground clearance. Thus they would really look mismatch when put on together
I think what's worry me most is that if the sideskirt and bumber from different body kits will have difference ground clearance. Thus they would really look mismatch when put on together
12-08-2003 | 12:15 AM
#68
SEMPER UBI SUB UBI
Joined: Aug 2003
Posts: 423
Likes: 0
From: Columbus, OH
get the "MS STYLE" kits from Rotary extreeme. I am not sure what you call them, I dont want to say "knockoffs" to degrade them any, but they are cheaper than the ones from MS, and look pretty much the same.
12-22-2003 | 05:41 AM
#70
Registered User
Joined: May 2003
Posts: 241
Likes: 0
From: Bayarea, CA
If you have purchased one and based on your experience, it does not fit the same, then I repect that. If you haven't, please don't say it may not fit the same. This is quite misleading. Please don't compare my work with those cheap made in China Honda bodykits that you can purchase for $450 a set. There are many rx7's in the magazines with our company's bodykits and quite often it's mistaken as original due to the superior fitment.
Chuck Huang
Chuck Huang
Originally posted by mikeb
it does look the same but it may not fit the same
it does look the same but it may not fit the same
12-22-2003 | 02:42 PM
#72
100% Italian
Joined: Jul 2003
Posts: 9,422
Likes: 0
From: orange,ca
Originally posted by Rotary Extreme
If you have purchased one and based on your experience, it does not fit the same, then I repect that. If you haven't, please don't say it may not fit the same. This is quite misleading. Please don't compare my work with those cheap made in China Honda bodykits that you can purchase for $450 a set. There are many rx7's in the magazines with our company's bodykits and quite often it's mistaken as original due to the superior fitment.
Chuck Huang
If you have purchased one and based on your experience, it does not fit the same, then I repect that. If you haven't, please don't say it may not fit the same. This is quite misleading. Please don't compare my work with those cheap made in China Honda bodykits that you can purchase for $450 a set. There are many rx7's in the magazines with our company's bodykits and quite often it's mistaken as original due to the superior fitment.
Chuck Huang
so is your kit half price compaired to ms because it is fiberglass instead of plastic.
I guess it might fit the same or close to the same as the ms kit but surely you won't agrue it is built stronger
12-22-2003 | 04:10 PM
#73
Registered User
Joined: Oct 2003
Posts: 24
Likes: 0
Mazdaspeed's bumper is urethane and it IS stronger than fiberglass. But from what i know, Rotary Extreme is also offer Urethane front bumper too. At a very good price, imo is well worth it.
The money you spend on Mazdaspeed is probabaly mostly cause they are made in Japan, shipped over, oversea tax and their brand. I'm not sure if Mazdaspeed bodykits come already painted though.
Can someone that have bought MS kit tell us, if the MS kit come painted ?
The money you spend on Mazdaspeed is probabaly mostly cause they are made in Japan, shipped over, oversea tax and their brand. I'm not sure if Mazdaspeed bodykits come already painted though.
Can someone that have bought MS kit tell us, if the MS kit come painted ?
12-28-2003 | 09:39 AM
#75
Registered User
Joined: Nov 2003
Posts: 49
Likes: 0
From: South Florida
Has anyone here bought the rotaryextreme MS style bodykit and can comment on it.
Or... rotaryextreme can you post more pictures of it on your website. You only have a picture of the front bumper on the car, nothing with the side skirts or rear.
Was this kit created to exactly replicate the look and fittment of the mazdaspeed? Do you believe you acheived this?
I would be very happy to get the $3500 mazdaspeed kit for $1750.
Or... rotaryextreme can you post more pictures of it on your website. You only have a picture of the front bumper on the car, nothing with the side skirts or rear.
Was this kit created to exactly replicate the look and fittment of the mazdaspeed? Do you believe you acheived this?
I would be very happy to get the $3500 mazdaspeed kit for $1750.