Oill Cooler / Grill Kits still available
08-16-2004 | 03:15 AM
#1
Thread Starter
Race Steward
iTrader: (1)
Joined: Aug 2003
Posts: 5,430
Likes: 2
From: Brisbane, Australia
Oill Cooler / Grill Kits still available
In case anyone is wondering, I still have stock from my last production run of grills or screens.
These became a necessity on my 2 week old RX-8 after it took a rock that pierced the A/C condensor. That let all the gas out. And it was on a sealed road, so don't get some picture of my bouncing along on a dirt road in the outback!
It is fairly economical to ship these to the USA and anywhere else in the world. I even get cartons made up especially for them.
They are simple to fit. All that is required to fit them is to remove the front bumper. The oil cooler grills universally fits L/H and R/H coolers, whether a fog light is present or not. No nuts, bolts, drilling or cutting is required for the Oil Cooler grills. The "big" grill that goes in the lower opening of the bumper is fixed with some small stainless steel fittings. These are not visible from the outside, and do not penetrate (or go near) the outer skin.
The grills are made from grade 316 Stainless Steel woven wire mesh. They are spot welded in certain points, and coated with a durable black powder coat finish.
Click this link to download the brochure for more info and pics.
They are a must if you really love your '8!
Please PM me if you want to get one of the last left from the most recent production run.
Cheers,
Hymee.
These became a necessity on my 2 week old RX-8 after it took a rock that pierced the A/C condensor. That let all the gas out. And it was on a sealed road, so don't get some picture of my bouncing along on a dirt road in the outback!
It is fairly economical to ship these to the USA and anywhere else in the world. I even get cartons made up especially for them.
They are simple to fit. All that is required to fit them is to remove the front bumper. The oil cooler grills universally fits L/H and R/H coolers, whether a fog light is present or not. No nuts, bolts, drilling or cutting is required for the Oil Cooler grills. The "big" grill that goes in the lower opening of the bumper is fixed with some small stainless steel fittings. These are not visible from the outside, and do not penetrate (or go near) the outer skin.
The grills are made from grade 316 Stainless Steel woven wire mesh. They are spot welded in certain points, and coated with a durable black powder coat finish.
Click this link to download the brochure for more info and pics.
They are a must if you really love your '8!
Please PM me if you want to get one of the last left from the most recent production run.
Cheers,
Hymee.
Last edited by Hymee; 08-16-2004 at 03:18 AM.
Thread
Thread Starter
Forum
Replies
Last Post
TotalAutoPerformance
Vendor Classifieds
12
10-17-2018 10:00 AM
Learners_Permit
Series I Interior, Audio, and Electronics
8
09-27-2015 08:38 PM
Digitz0070
Series I Aftermarket Performance Modifications
5
09-25-2015 11:58 PM
