Notices

Paint Chip Help

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 10-23-2012 | 01:09 PM
  #1  
BadgerBear72's Avatar
Thread Starter
New Member
 
Joined: Jul 2012
Posts: 4
Likes: 0
KS Paint Chip Help

Hi guys, I went to my first track day over the weekend in my R3, was an absolute blast and will go back as soon as possible. But I used blue painting tape to cover the front of my car which worked very well, but some of the tape came off because I didn't apply it properly and I got a few tiny chips to my paint. If I order the paint and take it to a body shop what are the estimated prices and if I do it myself how should I do it so it looks as good as it did originally?
Old 10-23-2012 | 01:15 PM
  #2  
200.mph's Avatar
FULLY SEMI AUTOMATIC
iTrader: (9)
 
Joined: Aug 2008
Posts: 5,706
Likes: 2,508
From: BALLS DEEP
try dr.colorchip.
Old 10-23-2012 | 02:42 PM
  #3  
paimon.soror's Avatar
Registered
iTrader: (15)
 
Joined: Jun 2010
Posts: 7,560
Likes: 27
From: Between Cones
if it is a small chip, it really isn't worth the hassle of getting the oem paint and touching up, mainly because to properly do it you are going to need to sand down the area around the chip, clean it, apply the touch up, wait till dry, wet sand, add another layer, let dry, wet sand, add a clearcoat.

Taking it to a bodyshop will more than likely cost you 100 bucks even if it is smaller than a dime.

Get dr colorchip. I used it on my car with fantastic results.
Old 10-23-2012 | 03:16 PM
  #4  
Heeroguy's Avatar
Banned
 
Joined: Sep 2011
Posts: 329
Likes: 1
From: Pottsville, Pa
ok do this,

get the touch up paint from dealship

then get an old lead pencil i'd look for a .5mm but .7 will work.

remove the cap part with the hollow metal tip the lead goes through.

now put 1-2 drops of paint inside the cap part of the tips.

make sure the paint starts to feed through, use your finger and push it down until you see any paint come out the tip end.

now you have an ultra fine touch up pen,

for chips, dab tip in center and keep just tapping it to fill in hole, let dry and repeat untill the paint is level, if you get any paint outside of the chip wipe off and start over,

for scratches this works awesome aswell and you can put the tip flush on the paint with the scratch in the cent and it will most likly fill in just the scratch.

but good luck
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
LB2739
New Member Forum
5
07-09-2019 03:25 AM
Trancemission
RX-8 Multimedia/Photo Gallery
46
12-02-2015 08:26 PM
garethleeds
Europe For Sale/Wanted
6
11-19-2015 07:32 AM
GK1707
RX-8 Parts For Sale/Wanted
0
09-27-2015 08:33 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -5. The time now is 05:43 PM.