Renesis badge on rear end?
#101
Registered
Join Date: May 2005
Location: Worc. Mass.
Posts: 734
Likes: 0
Received 0 Likes
on
0 Posts
#105
Redlined
iTrader: (5)
Exactly why i only purchased 1 a few weeks ago just in case it was crappy or was 2 big -- Its the same size as stock so its a direct replacement for the front and back and it feels solid unlike the current ones which are cheap plastic -- now waiting for the other 1 and the letters -- Thanks to Bruce for the pdf gonna come in handy when i do it.
Last edited by Juansito; 06-05-2011 at 11:42 PM.
#115
5 Boro Rotary......5BR
#117
5 Boro Rotary......5BR
Nice you getting the throw back symbol.. Yea I was looking through this thread the renesis in the rear looks good.. Are you getting it on the site that they got it from?
#118
Ones of these for the center....
![](http://cdn1.iofferphoto.com/img/item/156/847/637/z6ruh4H6QNQcjNa.jpg)
And one of these to replace the "Mazda"....
![](http://www.rotaryfx.com/v/vspfiles/photos/INT1038-2.jpg)
And yes batmobile for the 3rd brake light....
![](http://www.rotaryfx.com/v/vspfiles/photos/VIN1057-2.jpg)
At some point I'll have the holes filled and flushed, but these will do as a quick fix for now![Wink](https://www.rx8club.com/images/smilies/wink.gif)
At one point I had the RX8 relocated to replace the Mazda bit, but the double sided tape I used wasn't that strong and came off lol.....
![](https://a8.sphotos.ak.fbcdn.net/photos-ak-snc1/v2254/133/61/1213612318/n1213612318_30330052_6791.jpg)
![](http://cdn1.iofferphoto.com/img/item/156/847/637/z6ruh4H6QNQcjNa.jpg)
And one of these to replace the "Mazda"....
![](http://www.rotaryfx.com/v/vspfiles/photos/INT1038-2.jpg)
And yes batmobile for the 3rd brake light....
![](http://www.rotaryfx.com/v/vspfiles/photos/VIN1057-2.jpg)
At some point I'll have the holes filled and flushed, but these will do as a quick fix for now
![Wink](https://www.rx8club.com/images/smilies/wink.gif)
At one point I had the RX8 relocated to replace the Mazda bit, but the double sided tape I used wasn't that strong and came off lol.....
![](https://a8.sphotos.ak.fbcdn.net/photos-ak-snc1/v2254/133/61/1213612318/n1213612318_30330052_6791.jpg)
![](https://a2.sphotos.ak.fbcdn.net/photos-ak-snc1/v2254/133/61/1213612318/n1213612318_30330053_7125.jpg)
Last edited by g4crx; 06-09-2011 at 08:46 AM.
#119
Redlined
iTrader: (5)
I have a problem -- The letters i got are bigger than the OPs so i dunno if its gonna come out right.
On the bright side;
I did the front badge today -- It was a ****** BITCH excuse my language to get the stock badge off and get all the glue off and i kinda scratched the paint but it came out with a ton of goo gone and the scratch came out with some compound -- the emblem i got looks so ******* sexy on the front painted black -- i didnt place it correctly so the top and bottom dont stick but nobody but me will ever notice -- covered the holes perfectly.
![](https://a7.sphotos.ak.fbcdn.net/hphotos-ak-snc6/253709_10150653826970571_544280570_19128538_4620334_n.jpg)
When i finish the whole thing ill post some better pics -- these were off my phone which i know sucks but when i do the back ill use my SLR.
On the bright side;
I did the front badge today -- It was a ****** BITCH excuse my language to get the stock badge off and get all the glue off and i kinda scratched the paint but it came out with a ton of goo gone and the scratch came out with some compound -- the emblem i got looks so ******* sexy on the front painted black -- i didnt place it correctly so the top and bottom dont stick but nobody but me will ever notice -- covered the holes perfectly.
![](https://a7.sphotos.ak.fbcdn.net/hphotos-ak-snc6/253709_10150653826970571_544280570_19128538_4620334_n.jpg)
When i finish the whole thing ill post some better pics -- these were off my phone which i know sucks but when i do the back ill use my SLR.
#120
Redlined
iTrader: (5)
Finished the back! The back lettering is super easy -- just use tape and line up the letters and then put them down -- you cant mess up cause the R N and S cover the holes so just make sure your spacing is good -- You can see the E and N are 2 close cause i messed up but its ok it looks good to me ![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
Also for those who need it -- GOO GONE IS YOUR BEST FRIEND! and if your like me your gonna have years of dirt on there -- take some rubbing compound and it will come off like butter.
![](https://a2.sphotos.ak.fbcdn.net/hphotos-ak-snc6/248924_10150657551215571_544280570_19165215_8122339_n.jpg)
![](https://a6.sphotos.ak.fbcdn.net/hphotos-ak-ash4/254490_10150657551305571_544280570_19165217_4679542_n.jpg)
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
Also for those who need it -- GOO GONE IS YOUR BEST FRIEND! and if your like me your gonna have years of dirt on there -- take some rubbing compound and it will come off like butter.
![](https://a2.sphotos.ak.fbcdn.net/hphotos-ak-snc6/248924_10150657551215571_544280570_19165215_8122339_n.jpg)
![](https://a6.sphotos.ak.fbcdn.net/hphotos-ak-ash4/254490_10150657551305571_544280570_19165217_4679542_n.jpg)
![](https://a6.sphotos.ak.fbcdn.net/hphotos-ak-snc6/254476_10150657551360571_544280570_19165220_5469218_n.jpg)
#121
5 Boro Rotary......5BR
Finished the back! The back lettering is super easy -- just use tape and line up the letters and then put them down -- you cant mess up cause the R N and S cover the holes so just make sure your spacing is good -- You can see the E and N are 2 close cause i messed up but its ok it looks good to me ![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
Also for those who need it -- GOO GONE IS YOUR BEST FRIEND! and if your like me your gonna have years of dirt on there -- take some rubbing compound and it will come off like butter.
![](https://a2.sphotos.ak.fbcdn.net/hphotos-ak-snc6/248924_10150657551215571_544280570_19165215_8122339_n.jpg)
![](https://a6.sphotos.ak.fbcdn.net/hphotos-ak-ash4/254490_10150657551305571_544280570_19165217_4679542_n.jpg)
![](https://a6.sphotos.ak.fbcdn.net/hphotos-ak-snc6/254476_10150657551360571_544280570_19165220_5469218_n.jpg)
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
Also for those who need it -- GOO GONE IS YOUR BEST FRIEND! and if your like me your gonna have years of dirt on there -- take some rubbing compound and it will come off like butter.
![](https://a2.sphotos.ak.fbcdn.net/hphotos-ak-snc6/248924_10150657551215571_544280570_19165215_8122339_n.jpg)
![](https://a6.sphotos.ak.fbcdn.net/hphotos-ak-ash4/254490_10150657551305571_544280570_19165217_4679542_n.jpg)
![](https://a6.sphotos.ak.fbcdn.net/hphotos-ak-snc6/254476_10150657551360571_544280570_19165220_5469218_n.jpg)
#124
The darkness lies within
Join Date: Jun 2011
Location: Annapolis
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Rubbing compound?
Finished the back! The back lettering is super easy -- just use tape and line up the letters and then put them down -- you cant mess up cause the R N and S cover the holes so just make sure your spacing is good -- You can see the E and N are 2 close cause i messed up but its ok it looks good to me ![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
Also for those who need it -- GOO GONE IS YOUR BEST FRIEND! and if your like me your gonna have years of dirt on there -- take some rubbing compound and it will come off like butter.
![](https://a2.sphotos.ak.fbcdn.net/hphotos-ak-snc6/248924_10150657551215571_544280570_19165215_8122339_n.jpg)
![](https://a6.sphotos.ak.fbcdn.net/hphotos-ak-ash4/254490_10150657551305571_544280570_19165217_4679542_n.jpg)
![](https://a6.sphotos.ak.fbcdn.net/hphotos-ak-snc6/254476_10150657551360571_544280570_19165220_5469218_n.jpg)
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
Also for those who need it -- GOO GONE IS YOUR BEST FRIEND! and if your like me your gonna have years of dirt on there -- take some rubbing compound and it will come off like butter.
![](https://a2.sphotos.ak.fbcdn.net/hphotos-ak-snc6/248924_10150657551215571_544280570_19165215_8122339_n.jpg)
![](https://a6.sphotos.ak.fbcdn.net/hphotos-ak-ash4/254490_10150657551305571_544280570_19165217_4679542_n.jpg)
![](https://a6.sphotos.ak.fbcdn.net/hphotos-ak-snc6/254476_10150657551360571_544280570_19165220_5469218_n.jpg)