Shine Auto Project
02-23-2012, 08:51 PM
#1
i haz rotary? say what?
Thread Starter
iTrader: (2)
Join Date: Nov 2010
Location: Southern Arizona
Posts: 534
Likes: 0
Received 0 Likes
on
0 Posts
Shine Auto Project
I had a hard time finding any thread dealing with Shine Auto Project, but the few I did find seem to agree that their body kits fit pretty well. I just want to make sure however, because I recently wasted $700 on a Extreme Dimensions piece of trash.
My question is are these kits worth putting on my RX8? Will they look good?
First, for everybody's edification, I just got an email back from Shine Auto Project (shineautoproject at gmail dot com). I was a little confused because their website only shows 3 RX7 kits and a 370z kit. This is what I got back.
My question is are these kits worth putting on my RX8? Will they look good?
First, for everybody's edification, I just got an email back from Shine Auto Project (shineautoproject at gmail dot com). I was a little confused because their website only shows 3 RX7 kits and a 370z kit. This is what I got back.
Yes indeed we do. here ya go.
Rx8 parts
Spec-A Aero Kit ( Autobahn Replica)
4-way pics.
We never offered a replica of the rear bumper as it requires a special custom exhaust to be made. Most have gone with our spec-KS rear bumper, which seems to be a more fitting combination.
RX8-FB-A Rx-8 Spec-A Front Aero Bumper Hybrid FRP $450
RX8-SS-A Rx-8 Spec-A Sideskirts Hybrid FRP $300
Rx8 Type-AX Aero (Autoexe replica)
We do not offer a replica of the Autoexe sides or rear bumper. We once offered a replica of the rear bumper, but most enthusiasts leaned towards the Spec-KS, and we have discontinued the Autoexe rear bumper ever since.
2-way pic.
RX8-FB-AX Rx8 Type-AX Front Aero Bumper Hybrid FRP $450
Rx8 Type-F (Feed Replica) New product. more pics coming soon
4-way
RX8-FB-F Rx8 Type-F Front Aero Bumper Hybrid FRP $450
Rx8-SS-F Rx8 Type-F Sideskirts Hybid FRP $300 Carbon accented $500
Spec-KS Rear Aero Bumper (Kenstyle replica)
RX8-RB-KS Rx8 Spec-KS Rear Aero Bumper Hybrid FRP $450
New version* Carbon accented center section $750
Rx8 parts
Spec-A Aero Kit ( Autobahn Replica)
4-way pics.
We never offered a replica of the rear bumper as it requires a special custom exhaust to be made. Most have gone with our spec-KS rear bumper, which seems to be a more fitting combination.
RX8-FB-A Rx-8 Spec-A Front Aero Bumper Hybrid FRP $450
RX8-SS-A Rx-8 Spec-A Sideskirts Hybrid FRP $300
Rx8 Type-AX Aero (Autoexe replica)
We do not offer a replica of the Autoexe sides or rear bumper. We once offered a replica of the rear bumper, but most enthusiasts leaned towards the Spec-KS, and we have discontinued the Autoexe rear bumper ever since.
2-way pic.
RX8-FB-AX Rx8 Type-AX Front Aero Bumper Hybrid FRP $450
Rx8 Type-F (Feed Replica) New product. more pics coming soon
4-way
RX8-FB-F Rx8 Type-F Front Aero Bumper Hybrid FRP $450
Rx8-SS-F Rx8 Type-F Sideskirts Hybid FRP $300 Carbon accented $500
Spec-KS Rear Aero Bumper (Kenstyle replica)
RX8-RB-KS Rx8 Spec-KS Rear Aero Bumper Hybrid FRP $450
New version* Carbon accented center section $750
Last edited by Matrx8; 02-23-2012 at 08:55 PM.
02-23-2012, 08:52 PM
#2
i haz rotary? say what?
Thread Starter
iTrader: (2)
Join Date: Nov 2010
Location: Southern Arizona
Posts: 534
Likes: 0
Received 0 Likes
on
0 Posts
Continued
Rx8 Type-II Lip Kit
4-way pics
RX8-FL-Type II Rx8 Type-II Front Lip Spoiler Hybrid FRP $250
RX8-SS-Type II Rx8 Type-II Sideskirts Hybrid FRP $300
RX8-RAD-Type-II Rx8 Type-II Rear Ads-Ons Hybrid FRP $125
Ken
4-way pics
RX8-FL-Type II Rx8 Type-II Front Lip Spoiler Hybrid FRP $250
RX8-SS-Type II Rx8 Type-II Sideskirts Hybrid FRP $300
RX8-RAD-Type-II Rx8 Type-II Rear Ads-Ons Hybrid FRP $125
Ken
Last edited by Matrx8; 02-23-2012 at 08:56 PM.
02-23-2012, 11:42 PM
#4
i haz rotary? say what?
Thread Starter
iTrader: (2)
Join Date: Nov 2010
Location: Southern Arizona
Posts: 534
Likes: 0
Received 0 Likes
on
0 Posts
Hi Everyone,
*Just want to start out this post by saying Ken at Shine is really a great guy. If anyone here is interested in any of their parts, be sure to email or call Shine, speak with Ken, and let him know you saw my post - he'll definitely take care of you! He's got an awesome FD also *
Earlier this year I spoke with Shine Auto Project and ended up ordering some special parts With one of the West coast's biggest show coming up, I thought it was time to refresh some of my exterior. I called up Ken from Shine Auto, inquiring about some new side skirts for my car. He talked me into trying out a new rear bumper concept, and I can not thank him enough for convincing me, it looks fantastic. But first, the sides:
Because I am running the FEED front, I thought some FEED sides would really tie things together before Wekfest SF this year. When Ken @ Shine offered to try a carbon accent on them, I was game! I picked up the sides, but one thing led to another and I ended up running my old Ings+1 side skirts. I still think these would look great and if I were keeping the FEED front, would already have these on my car!
For those interested, I believe retail on these sides with carbon accent is $500
(Please excuse the dust! - Also, those lines you see on the carbon are reflections.)
Now, onto the rear bumper! While I wasn't originally looking for a rear, Ken described the idea of a carbon accented Kenstyle rear and I just had to give it a try. No fiberglass fitting was required, just about plug and play for this rear bumper. I literally dry test fitted, dropped the bumper off for paint, picked it up, and installed it at home. Quality is honestly great, on par with what I would expect from an authentic piece. Quad tip exhaust should be complete in the near future, which will make this rear look even better!
For those interested, I believe retail with the carbon diffuser accent is $750 for this piece
*Just want to start out this post by saying Ken at Shine is really a great guy. If anyone here is interested in any of their parts, be sure to email or call Shine, speak with Ken, and let him know you saw my post - he'll definitely take care of you! He's got an awesome FD also *
Earlier this year I spoke with Shine Auto Project and ended up ordering some special parts With one of the West coast's biggest show coming up, I thought it was time to refresh some of my exterior. I called up Ken from Shine Auto, inquiring about some new side skirts for my car. He talked me into trying out a new rear bumper concept, and I can not thank him enough for convincing me, it looks fantastic. But first, the sides:
Because I am running the FEED front, I thought some FEED sides would really tie things together before Wekfest SF this year. When Ken @ Shine offered to try a carbon accent on them, I was game! I picked up the sides, but one thing led to another and I ended up running my old Ings+1 side skirts. I still think these would look great and if I were keeping the FEED front, would already have these on my car!
For those interested, I believe retail on these sides with carbon accent is $500
(Please excuse the dust! - Also, those lines you see on the carbon are reflections.)
Now, onto the rear bumper! While I wasn't originally looking for a rear, Ken described the idea of a carbon accented Kenstyle rear and I just had to give it a try. No fiberglass fitting was required, just about plug and play for this rear bumper. I literally dry test fitted, dropped the bumper off for paint, picked it up, and installed it at home. Quality is honestly great, on par with what I would expect from an authentic piece. Quad tip exhaust should be complete in the near future, which will make this rear look even better!
For those interested, I believe retail with the carbon diffuser accent is $750 for this piece
Last edited by Matrx8; 04-22-2012 at 06:05 PM.
02-26-2012, 01:05 AM
#6
OMGITM!
iTrader: (15)
Join Date: Jan 2006
Location: Sunny Southern California
Posts: 3,513
Likes: 0
Received 6 Likes
on
6 Posts
I have worked with Shine on a few products and have had no issues.
Just installed the first rear Kenstyle with carbon diffuser myself and fitment is superb, required no additional fitting.
Just installed the first rear Kenstyle with carbon diffuser myself and fitment is superb, required no additional fitting.
02-26-2012, 03:11 PM
#7
Registered
iTrader: (1)
Join Date: Oct 2010
Location: Northern Kentucky
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
If you notice on one of the first slides of their flash application, it mentions that the site is under construction/being update. Which is why the Rx-7 and 350z is the only cars on the site at the moment.
You can go to their backed up site by clicking on the slide that comes up as soon as you get to their site to check out their old site.
You can go to their backed up site by clicking on the slide that comes up as soon as you get to their site to check out their old site.
02-27-2012, 09:15 PM
#10
Just call or email them if you are interested in a product. They are good at returning phone calls and emails. Also there is a good chance they have something that is not listed on ebay so be sure to ask what is available. I know they used to have an RX8 section on their site so they must have removed it. Good to see they are adding it back.
04-22-2012, 06:10 PM
#12
i haz rotary? say what?
Thread Starter
iTrader: (2)
Join Date: Nov 2010
Location: Southern Arizona
Posts: 534
Likes: 0
Received 0 Likes
on
0 Posts
Just added a few pics from Tiltmode's thread. I got an email from Ken a few days ago, my kit's shipped, It'll be at the shop sometime this week, so hopefully I'll have it and some pictures ready in 2 or 3 weeks.
04-22-2012, 11:51 PM
#13
The guys at RX7club have always been fans of them because they have a repetition of making great reps. In fact, in most situations, their reps usually fit better than the originals from FEED, Sanai, Autoexe, etc etc.
I certainly hope Shine can make a good rep of the MS front. Preferably with corner light delete.
I certainly hope Shine can make a good rep of the MS front. Preferably with corner light delete.
05-31-2012, 08:29 PM
#16
Registered User
05-31-2012, 11:00 PM
#18
thanks for taking pictures of the before and after of the bumper. Can you take a measurement of how low to the ground the oem bumper is and then how low the new bumper is. feed front has been my favorite but after getting low i dont think i can swap the oem out.
05-31-2012, 11:23 PM
#20
i haz rotary? say what?
Thread Starter
iTrader: (2)
Join Date: Nov 2010
Location: Southern Arizona
Posts: 534
Likes: 0
Received 0 Likes
on
0 Posts
Mine isn't lowered. Yet.And of course, pictures galore when It's done!
Also, this is what it looks like right now.
Last edited by Matrx8; 05-31-2012 at 11:27 PM.
06-01-2012, 03:08 PM
#21
yeah, i want to try to get everyone who is getting an aftermarket kit to take extensive before and after pictures.
alot of kits have been around since 04, 05 but no threads on the fitment. Lots of threads on the finished piece after countless hours were spent making it look nice but whats the point in that right?
I want to see some pics of it first mounted and how many problems there are and where the problems are, this allows people in the future to know exactly what they are getting themself into. If the thread existed with an extreme dimensions kit and how it fit from the factory without any bodyshop touching it up, i would have linked you to it and you most likely would not have purchased from them.
a few pictures go a long way, as you know.. people get suckered into buying extreme dimensions over and over again because there are no fitment pictures from the factory. With these pictures im sure their business will go down(a good thing) and more money in our pockets(a good thing).
Im on a 2inch drop and i baaaaarely scrape getting out of my driveway. the feed front is my favorite with the rmagic bumper with cf lip in a close second. If its much lower ill just save my cash
EDIT: you might want to edit up those feed front pictures. None of them are shine parts, they are the real deal. If you do a search i believe the user "grog" got the feed front and after about $500 he got it to fit OK, but there was still some issues around the side markers. oh and then he totaled his car :/
alot of kits have been around since 04, 05 but no threads on the fitment. Lots of threads on the finished piece after countless hours were spent making it look nice but whats the point in that right?
I want to see some pics of it first mounted and how many problems there are and where the problems are, this allows people in the future to know exactly what they are getting themself into. If the thread existed with an extreme dimensions kit and how it fit from the factory without any bodyshop touching it up, i would have linked you to it and you most likely would not have purchased from them.
a few pictures go a long way, as you know.. people get suckered into buying extreme dimensions over and over again because there are no fitment pictures from the factory. With these pictures im sure their business will go down(a good thing) and more money in our pockets(a good thing).
Im on a 2inch drop and i baaaaarely scrape getting out of my driveway. the feed front is my favorite with the rmagic bumper with cf lip in a close second. If its much lower ill just save my cash
EDIT: you might want to edit up those feed front pictures. None of them are shine parts, they are the real deal. If you do a search i believe the user "grog" got the feed front and after about $500 he got it to fit OK, but there was still some issues around the side markers. oh and then he totaled his car :/
06-01-2012, 03:22 PM
#22
EricB is you refer to the grey one posted above, that car is from Turkey, and the kit is from Shine. Those are the same pictures Ken sent to me last year when I enquired about the FEED front.
06-04-2012, 01:00 AM
#23
i haz rotary? say what?
Thread Starter
iTrader: (2)
Join Date: Nov 2010
Location: Southern Arizona
Posts: 534
Likes: 0
Received 0 Likes
on
0 Posts
I talked to the body shop owner on Friday, he said there was some issues with the kenstyle rear bumper and my TurboXS exhaust and he's have to do some cutting to get it to fit correctly, so that's kind of worrying. He said other than that it fit perfectly and that he'd take some pictures of what he had to cut out. I'll know more on Friday, but I'm pretty sure it wasn't anything visible that he was cutting.
He also said he hadn't had time to mess with the front yet.
He also said he hadn't had time to mess with the front yet.
