Wanted: Concept Mazdaspeed RX-8 Hood
#202
Did u Knw Ur Grlz on my..
^^^NO. The opening is not "too flat" please don't make it any different that the one in the picture. If i wanted to put a hugh cowl induction hood scoop on my car i would own a subaru......... I like the low profile look and hopefully everyone else does to. What are you talkin' about, the 8 in the picture is WHITE and it looks smokin'. If you lay a peice of black vynal, like the one graffics are made out of, on the open area, where you would see the hood, then it would look like there was a hole.
#203
Nobody said anything about a huge cowl scoop.
I think the opening needs to be more of a squished oval, right now it looks like a big hole in the hood, it doesn't look right. It needs to slope upward a bit more and look less like someone drilled a big circle straight down through the hood.
If it stays the way it is then I'm out.
I think the opening needs to be more of a squished oval, right now it looks like a big hole in the hood, it doesn't look right. It needs to slope upward a bit more and look less like someone drilled a big circle straight down through the hood.
If it stays the way it is then I'm out.
#206
Administrator
it should have a "floor" where i have colored in the are that was black in the above pic. the hole or mesh should be where i have made black in my pic. i think i said something like that previously. and i agree with with umbra that it needs to be a little taller like the darker clay colored line i added in the pic below
![](https://www.rx8club.com/attachments/series-i-exterior-appearance-body-kits-27/70809-wanted-concept-mazdaspeed-rx-8-hood-hood9.jpg)
#208
Did u Knw Ur Grlz on my..
Originally Posted by Rhequiem
Didnt the concept hood we all looked at in the beginning of this thread which started the demand for this hood scoop look like a squished oval?
![Iwstupid](https://www.rx8club.com/images/smilies/iwstupid.gif)
#209
Originally Posted by zoom44
it should have a "floor" where i have colored in the are that was black in the above pic. the hole or mesh should be where i have made black in my pic. i think i said something like that previously. and i agree with with umbra that it needs to be a little taller like the darker clay colored line i added in the pic below
![](https://www.rx8club.com/attachments/series-i-exterior-appearance-body-kits-27/70809-wanted-concept-mazdaspeed-rx-8-hood-hood9.jpg)
![](https://www.rx8club.com/attachments/series-i-exterior-appearance-body-kits-27/70809-wanted-concept-mazdaspeed-rx-8-hood-hood9.jpg)
#215
I agree, that is more what I was thinking too. Looks more like a traditional hood scoop, and I think it would be better for the people looking to do functional too. With a higher dome, it would catch more air and pressure. Excellent touch up to the original pic....
#217
Originally Posted by hookupshop
The hood scoop will not come with grill or any vent cut out. It will be one solid carbon fiber hood scoop. We will provide 3M industrial strength double sided tapes for mounting the hood scoop on the hood. It is up to everyone to cut out the vent inlet and install the mesh grill from behind, and also cut into the OEM hood to make it functional. I recommend drilling a few screws or installing a few nuts & bolts to hold down the hood scoop if you decided to make the hood scoop functional.
Yes...we are fixing the hood scoop to best match the Concept one. There will be more pictures once the clay model is done. I will get the majority approval here in the forum before we make the mold. Thank you for all those who add their names to the list.
Yes...we are fixing the hood scoop to best match the Concept one. There will be more pictures once the clay model is done. I will get the majority approval here in the forum before we make the mold. Thank you for all those who add their names to the list.
#220
Registered User
Thread Starter
Join Date: Jun 2005
Location: Bellevue, WA
Posts: 134
Likes: 0
Received 0 Likes
on
0 Posts
HUS, any word on pricing? Can you give us fairly accurate +/-10% estimates for FG and CF hoods? Min. amounts required for fabrication or cost and desired profit margins? ![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
Thanks,
-jc
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
Thanks,
-jc
#221
#1 Legend
iTrader: (1)
Join Date: May 2004
Location: TEXAS
Posts: 3,904
Likes: 0
Received 0 Likes
on
0 Posts
In regards to the original or this MS Paint version
![](https://www.rx8club.com/attachments/series-i-exterior-appearance-body-kits-27/70809-wanted-concept-mazdaspeed-rx-8-hood-hood9.jpg)
I hope you do realize there is no function to this... at all. Your suckin in air to the back of the engine bay when the intake is much further up. There is no way this thing is going to ventilate air out either. So 1 - no air going in to anywhere that it is needed, 2 - no hot air from the motor is being released.
Nobody better bring up the "But WRX STIs have it". Blah... and theirs is also completely non-functional. The Subaru WRC Rally cars actually have the hood scoop closed, since it provides no benefit.
As an aesthetics only mod... i guess its all right. Thats reallly just up to your own personal opinion though.
Sorry to **** on the hood scoop parade. Just wanted to get that out.
-hS
![](https://www.rx8club.com/attachments/series-i-exterior-appearance-body-kits-27/70809-wanted-concept-mazdaspeed-rx-8-hood-hood9.jpg)
I hope you do realize there is no function to this... at all. Your suckin in air to the back of the engine bay when the intake is much further up. There is no way this thing is going to ventilate air out either. So 1 - no air going in to anywhere that it is needed, 2 - no hot air from the motor is being released.
Nobody better bring up the "But WRX STIs have it". Blah... and theirs is also completely non-functional. The Subaru WRC Rally cars actually have the hood scoop closed, since it provides no benefit.
As an aesthetics only mod... i guess its all right. Thats reallly just up to your own personal opinion though.
Sorry to **** on the hood scoop parade. Just wanted to get that out.
-hS
#223
Rotary eXperimental-8
Join Date: Nov 2003
Location: Gander, Newfoundland, Canada
Posts: 1,830
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BigOLundh
Nobody better bring up the "But WRX STIs have it". Blah... and theirs is also completely non-functional. The Subaru WRC Rally cars actually have the hood scoop closed, since it provides no benefit.
#224
That is true, you can see the plasitc black intake vent on the front. So the hoop scoop is not for intake at all, just the intercooler. I am not really concerned about function at first, once the warranty is up...then I can look at making it functional. As far as aesthetics, yes I do believe it will make alot of difference. I mean come on, if a neon can look good with a scoop, I know the RX8 will look good!