what? the dvd ? yes the dvd ME-3 does have the t.v. tuner built in..


and yes the avelectronics nav t.v. switcher box does to...

so not sure what you are trying to say.

anyway as i said before you get what you pay for. why is 495 to much for a car that cost at leaset 27,000 - 35,000 ???

if you want to go cheep then just get a portable dvd system.

 

I have a Mazda with Custum Nav + Custun Multi cd-changer + Custum Bose Sound System.
In Italy is sold only the high performance model. Full Optional.

I need use all the things that I altready installes and I want to increse the system with: European DVD Player (Region2) + Pal TV tuner + line in to insert my ipod player or another car mp3 player.
Can you help me?

 

OK, here are a few photos of my DVD installation using a Blaupunkt DVD-ME3 player and the Nav-Vision composite-to-RGBs converter.

Here's the Nav screen showing a DVD


This is where I mounted the Nav-Vision box. You can just see the bottom of it at the upper right of the picture.


The rear of the nav unit with the wiring exposed.


This shows the nav unit having been moved forward with the wiring exposed. You need to move it forward to get to the wiring.


The DVD-ME3 has been mounted. The Nav unit is still moved forward. Note that there is a "passage" through which you can run the wires. The video cable is running through it in the photo.


You need to cut these four wires. The red wire is the red signal, the blue wire is the blue signal, the green wire is the green signal and the white wire is the sync signal.



Battery Positive, Accessory Positive, Battery Negative (aka 'ground' or 'earth') and Parking Brake ground are all available on the 16-pin connector. I'll post the details later.

 

How can you switch from navigation system to DVD or Tv/Tuner player?

Im'sorry that Blauounkt ME3 has not a Pal TV tuner :-(

 

The Nav-Vision box does the switching with a relay. When the Nav-Vision box is powered up, it will switch.
I have it wired so that there is power to it any time the ignition switch is ON or ACC. The I wired the ground (earth) side of the relay to the parking brake switch. To change to DVD I just pull the parking brake ONE click. That turns on the Parking brake warning light and the DVD system. Don't worry; the parking brake has to be pulled more than one click to have any effect at all on the brakes. I checked!

Quote:

Im'sorry that Blauounkt ME3 has not a Pal TV tuner :-(

You might check to see if they have a PAL unit. They are a German company after all. I only looked on their US website. Check their European site.

 

That looks SWEET! and thats a great idea about the parking brake. does the rx-8 normally not let you use the nav with the parking brake up? or in reverse? i have heard some cars are like that... im pretty sure the mazda3 doesnt but im gonna go check when i drive my girlfrind to work..

CONGRATS agian on the install, its so nice to see exactly what wires i have to cut. im still waiting for my gex-p7000tv. the 6400 i dont think will work... and i think im going to put a computer in the car instead of the dvd-me3 because i want my mp3 library, and well the dvd player, and if they ever come out with software/hardware for the engine ill be able to do it onscreen.. just some ideas dont know how real they will be but maybe. my other idea is to put my xbox in the car since its modified its got everything i need.. 120gig hd p3 700mhz dvd player.. and you can run windows on it.. if you guys are interested in the modded xbox box idea check out www.xbox-scene.com i know an installer also in queens ny that will hook u up. sorry to get off topic.. and ill post my ir/osd box later tonight

 

witch kind of relè did you install?
How did you install it?Have you got other pictures?
Where do you buy it?
Thanks

 

you can do what i did.. run the parking break signal to ground. then you can bypass that altogether.

 

did you connect the ground of Blackpunkt ME-3 to car hand-brake? To the light or to the lever?
Which wire is the ground?
So when you use the hand brake the ME-3 start and show you Tv or DVD-player.I think you can command it with a remote control?
And When the hand brave is dows the navigation sistem work?
Right?
But the audio of nav system continue working also with tv-tuner or dvd-video?
The Blaupunkt Me-3 take to the Bose Mazda loudspeakers also the audio of Tv or DVD?Or shall you do a particular connection?
Thanks

 

none.. the me3 is grounded to the isolated ground terminal on the oem dvd player. I bypassed the handbreak signal alltogther. that wire just need to be hooked to ground.

MY unit is hooked to the Avelectronics box. that is always on regardlesss of the hand break . The audio works through the fm recever. Sounds great


I can command all the devices with 2 diffrant remotes. the remote recivers are hidden behind the mp3 blank in your head unit.

 

Do you have also avelectonics unit?

I think that you connect directly the ME-3 to NAV display throught composite to RGB connector,and nothing morewas needed! I wrong :-(, I cannot but avelectronic. It's too ecpensive and it's ntsc signal.

 

you can convert any ntsc signal to pal.. thats easy.. yes you need some kind of a switch to switch from the dvd to the nav screen . blapunkt makes one as well.

 

Can I use IVSC-5501:it has 1 rgb in (sub-D 15 pin )and 1 rgb out(sub-D 15 pin)?
Then I could connect Tv tuner IVTV-01.
And eventually one dvd player or other sources,right?
What do you thinks about it? Can I switch from nav-system to blaupunkt converter?

 

it appears it may work... but its db15 going in and db 9 coming out.. at least thats what sound domains site said. it may work... but why not use the gex-p7000tv on ebay... i know its ntsc but cant you buy an converter to pal? thats if you need pal.. i mean 170.00 for the box you refer to, and its 180 for the gex-p7000tv on ebay... let us know what happens

 

yes that will work.. you only need the red, blue,green and sync wires.

as for pal. you just need to f ind a dvd player that is pal. the rest of the componets dont care.

its just the dvds you wil be watching over there that are in the Pal format. once the dvd has decoded it the image is just red,green,blue and sync.

 

remember if you get a converter and use a ntsc dvd player.. you will have to buy special ntsc dvds.. Just find a good Pal dvd unit. I know that Blabunkt makes a good Pal dvd unit. after all there a German co

you did find the Pal version of the ME-3 right.. you have to go to the UK blapunkt site.

 

you did see the isolated ground on the back of the oem dvd unit? that is where you have to connect any video shielded isolated grounds to get a steady non scrolling signal..

 

If I buy an Pioneer P7000TV ntsc,here in Italy I cannot use the Tv tuner. :-(

 

why ? and so what.. the t.v. thing is really usless.. and just a silly toy. I was in L.A. and could recive 3 Spanish stations ! thats all.. an why? I would more liklely be watching a move !! or playing with the playstation , or listen to music while doingthe above ;0

get over the t.v. thing. its not worth it

 

I think here in Italy,the tv tuner frequency is different!

The Radio FM is different for example. Here in Italy there is Pal Tv Tuner

I love Tv.And I will install my mp3 portable payer on a in source.

I install A Dvd player,later

 

bobclevenger


my first placement of the I/R reciver was in the middel of the Air vent just above the head unit. I velcroed it to the center plastic finns. That looked less obvious then your placement by the glove box. I almost put my video input switch there !.. then i got smart and put that in one of the knock out blanks on the left side

 

HEY EVERYONE, HERE IS AN UPDATE OF MY GEX-P7000TV SETUP.

I have not put it into my car yet, but have finished prepping the pioneer box and the irosd box. i figured you guys might want to see pics

 

another ir osd shot

 

the guts of the gex

 

sorry if the file sizes are screwed up.. i was trying out a new program.. i do have the original files if you want to see even closer they were shot on a 2.1 megapixel cam so dont expect toooooo much hahah. well enjoy guys