i have searched so much cuz i did not want to get flamed for this post. You all have no idea. i have a serious issue with making new posts cuz everything has already been said. now we just expand on what we have said. this kills me. how do i go about hooking up 2 600 watt amps to a stock 8s audio components. im needing preouts but we dont have those. i have 2 12 inch subs and i am amping them independently.with 2 600's. any ideas.

that was so hard to write. now i have to hit enter and get flamed for the first time. lets not get stupid and flame me for the fun of it though. although someone will be a jerk i know.

 

easy.. get a line level converter and tap into your rears to get RCAs and depending on your amp you may have inputs as well as a pass though channel to hook into the other amp or you may have to split.. of course alot of people will have other ideas than me... good luck PM me if you need help

 

If you're amping the components also, you'll want the NE-774V

If you only need 2 channels, you can get the NE-7V

http://www.autosound2000.com/adaptor_products.htm

 

i just wanna get the ability to hook up 2 amps to the oem deck and power 2 12s (1 for each amp) and this converter will do that? niceness. thanks.

 

get the 2 channel. it will do what you need..