Notices

Ipod Holders?

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 02-28-2007 | 09:58 AM
  #1  
Kings8's Avatar
Thread Starter
Registered
 
Joined: Oct 2005
Posts: 170
Likes: 0
From: La Verne, CA
Ipod Holders?

Anyone know of any good Ipod holders for the 8? I think I'm going to go the the Neo for my Ipod to car integration, but now I need to find a good holder that will give me easy access to the controls of the Ipod.

Any suggestions?
Old 02-28-2007 | 11:51 AM
  #2  
Detrich's Avatar
幹他媽!
 
Joined: Mar 2005
Posts: 2,078
Likes: 3
From: San Gabriel Valley, CA
this is what i use for my iPod in my cars, along with my Sony cassette car iPod adapter: http://www.theistore.com/ventmount.html

it's completely removable (clean) and won't scratch or break your A/C vents as long as you (1) install & remove the two grip clips gently and (2) put the clips on upside down from the way the instructions say to... (i noticed that if u install the grip clips upside down it's much safer & easier to remove, because all u need to do is gently press down and they slide right off. and, when they're on, they still grip firmly.)

i bought one for for my 8 & one for my beamer as well. and, personally, i think it works great. it puts the iPod at just the right eye level for you to navigate- ie not to low, not too high. another nice thing is it also rotates 180º. so, it will work with widescreen devices as well, like the Apple iPhone/ iPod, Zune etc. (i don't have a PSP, but it might fit that as well.)

the only con is that it does block the vent u mount it in front of- which is really only a problem if u have the heater on, since u don't want hot air blowing on your iPod. on my beamer it's not an issue, because if i have individual vent on/off dials for each vent. so, when the heat is on, i just turn off that particular vent using the turning dial.

it's not a perfect solution, but it does work well & safely. it's completely removable and grips well. or, if u choose to just leave it mounted, it stays put nicely. and, it doesn't eat up a cupholder or require any permanent glue or sticky mount mechanism.
Old 02-28-2007 | 01:06 PM
  #3  
kwescott's Avatar
One ball, corner pocket
 
Joined: Apr 2004
Posts: 2,053
Likes: 1
From: Fontucky, right next to Patriotville
this is the one I use....I have it plugged into my cig lighter so this allows me to keep the ipod charging. This adaptor has an FM transmittor that works fairly well...but I do have my ipod hardwired with the PIE adaptor as well.
http://www.compusa.com/products/prod...3_in_1_Car_Kit

Attached Thumbnails Ipod Holders?-car.gif  
Old 03-01-2007 | 03:13 AM
  #4  
Kings8's Avatar
Thread Starter
Registered
 
Joined: Oct 2005
Posts: 170
Likes: 0
From: La Verne, CA
Originally Posted by Detrich
this is what i use for my iPod in my cars, along with my Sony cassette car iPod adapter: http://www.theistore.com/ventmount.html

it's completely removable (clean) and won't scratch or break your A/C vents as long as you (1) install & remove the two grip clips gently and (2) put the clips on upside down from the way the instructions say to... (i noticed that if u install the grip clips upside down it's much safer & easier to remove, because all u need to do is gently press down and they slide right off. and, when they're on, they still grip firmly.)

i bought one for for my 8 & one for my beamer as well. and, personally, i think it works great. it puts the iPod at just the right eye level for you to navigate- ie not to low, not too high. another nice thing is it also rotates 180º. so, it will work with widescreen devices as well, like the Apple iPhone/ iPod, Zune etc. (i don't have a PSP, but it might fit that as well.)

the only con is that it does block the vent u mount it in front of- which is really only a problem if u have the heater on, since u don't want hot air blowing on your iPod. on my beamer it's not an issue, because if i have individual vent on/off dials for each vent. so, when the heat is on, i just turn off that particular vent using the turning dial.

it's not a perfect solution, but it does work well & safely. it's completely removable and grips well. or, if u choose to just leave it mounted, it stays put nicely. and, it doesn't eat up a cupholder or require any permanent glue or sticky mount mechanism.
Thanks for the suggestion I have looked/seen those that attach to the vents before, but always though that:
1. The cold and heat may be bad for the Ipod and
2. It would limit the ammount of air coming out of the vent.

Does it have any effect? Thanks
Old 03-01-2007 | 03:15 AM
  #5  
Kings8's Avatar
Thread Starter
Registered
 
Joined: Oct 2005
Posts: 170
Likes: 0
From: La Verne, CA
Originally Posted by kwescott
this is the one I use....I have it plugged into my cig lighter so this allows me to keep the ipod charging. This adaptor has an FM transmittor that works fairly well...but I do have my ipod hardwired with the PIE adaptor as well.
http://www.compusa.com/products/prod...3_in_1_Car_Kit

Thanks for the suggestion as well.

The positioning of the Ipod would work, but with the Neo charging it already, I wonder if that would create problems(extra stress on battery etc.)
Old 03-01-2007 | 09:36 AM
  #6  
dgrx8's Avatar
FN GR8
 
Joined: Apr 2005
Posts: 423
Likes: 1
From: Miami
i have a kuda mount on my 8... it is awesome! i'd recommend to anyone...
http://www.kudausa.com/kuda_mount_an...4-24-230.html#
Old 03-01-2007 | 01:03 PM
  #7  
Kings8's Avatar
Thread Starter
Registered
 
Joined: Oct 2005
Posts: 170
Likes: 0
From: La Verne, CA
Originally Posted by dgrx8
i have a kuda mount on my 8... it is awesome! i'd recommend to anyone...
http://www.kudausa.com/kuda_mount_an...4-24-230.html#

Thanks

How hard is it to reach and use the controls on that one?
Old 03-01-2007 | 01:13 PM
  #8  
Detrich's Avatar
幹他媽!
 
Joined: Mar 2005
Posts: 2,078
Likes: 3
From: San Gabriel Valley, CA
cold air is good for electronic devices- esp hard drives, like the iPod. so, u have nothing to worry about if u have the AC on. hot air, however, is not so good. if u use the heater at high temps a lot, u may want to to look at the mount that kwescott mentioned instead. personally, i run the heater at low temps in the winter and use my heated seat. my ipod has been fine.

i found a link to a cheaper version of kwescott's recommended dock:
http://www.handhelditems.com/ipod-tr...er-p-4950.html

as far as the amount of air, it only covers part of the vent. so, air flow is ok.

Originally Posted by Kings8
Thanks for the suggestion I have looked/seen those that attach to the vents before, but always though that:
1. The cold and heat may be bad for the Ipod and
2. It would limit the ammount of air coming out of the vent.

Does it have any effect? Thanks
Old 03-01-2007 | 01:38 PM
  #9  
kwescott's Avatar
One ball, corner pocket
 
Joined: Apr 2004
Posts: 2,053
Likes: 1
From: Fontucky, right next to Patriotville
Originally Posted by Kings8
Thanks for the suggestion as well.

The positioning of the Ipod would work, but with the Neo charging it already, I wonder if that would create problems(extra stress on battery etc.)

I had a Belkin holder that fit into the drink holder initially, but it didn't provide a power source and my Ipod always seemed to run out of juice....and it wasn't convenient for me to look down at.

The positioning with this, would be similar to the Kuda holder, you may want to check into that since you don't really need the power or FM transmittor function of the holder I use.
Old 03-01-2007 | 02:00 PM
  #10  
dgrx8's Avatar
FN GR8
 
Joined: Apr 2005
Posts: 423
Likes: 1
From: Miami
Originally Posted by Kings8
Thanks

How hard is it to reach and use the controls on that one?
it's not hard at all... it's actually effortless! the screen faces the driver directly & it's very easy to access the controls... they're completely withing reach. the ipod doesn't move at all either... very sturdy!
Old 03-01-2007 | 07:22 PM
  #11  
firebirdude's Avatar
User and Abuser
iTrader: (3)
 
Joined: Nov 2006
Posts: 3,113
Likes: 9
From: Sunshine State
Got mine in a polycarbonate case. Indestructible. Just keep it in the center console. That way I don't have to worry about prying eyes while my car is parked.... nor do I have to disconnect/move it every time I get in or out of the car.
Old 03-07-2007 | 11:34 PM
  #12  
Kings8's Avatar
Thread Starter
Registered
 
Joined: Oct 2005
Posts: 170
Likes: 0
From: La Verne, CA
Thanks again for all your help guys.

I decided to go with this one

http://www.proclipusa.com/?sectionpa...p_leftorright=
Old 03-08-2007 | 08:40 PM
  #13  
WarEagleRX8's Avatar
Registered User
 
Joined: Mar 2007
Posts: 28
Likes: 0
im not sure how that long part would look, kinda looks ugly
Old 10-30-2008 | 09:22 PM
  #14  
rgspb's Avatar
Registered User
 
Joined: Jul 2008
Posts: 23
Likes: 0
One thing to keep in mind with this particular mount, it is NOT compatible with '09s. I ordered this one because the site says it fits, but it's not even close. The area around the A/C controls is recessed as opposed to flush.

Originally Posted by Kings8
Thanks again for all your help guys.

I decided to go with this one

http://www.proclipusa.com/?sectionpa...p_leftorright=
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
vapor2
RX-8 Parts For Sale/Wanted
12
07-09-2016 07:35 AM
Nisaja
Series II Interior, Audio, and Electronics
5
11-03-2015 05:30 PM
BigKid
RX-8 Parts For Sale/Wanted
15
09-23-2015 07:46 PM
projectr13b
Series I Do It Yourself Forum
1
09-06-2015 01:04 PM
nivong
Europe For Sale/Wanted
0
09-02-2015 07:54 AM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: Ipod Holders?



All times are GMT -5. The time now is 01:16 PM.