rollerbldes

It is a few shades off and more of a very dark grey if looked under direct sunlight. At night you can not tell a difference. In daylight it is barely noticeable because there is nothing near the center console that has the same finish, thus there is nothing apparent to compare it to, thus it really looks fine.

If you want you can sand it down and repaint it but you would still not be able to match the stock finish unless you actually went to the original painters.

raphy3

yeah, the idea of it looking exactly like the stock piano black is somewhat moot since sitting there in your car there's not going to be anything to compare it to. It looks fine to me. No one who has sat in my car has said anything like, gee, that's not as good looking as what you had before. Instead, they're impressed with the HU and start playing around with it, which is kinda how it should be when you think about it. If the face plate is subtle enough not to jump and draw attention away from the HU then I think it must be fulfilling its purpose.

canaryrx8

iTrader: (3)

Even my professionally painted custom fabbed dashpiece is not a perfect match, pretty much impossible without getting it done straight from whoever coats the oem pieces. So aside from the firmware snags is everyone pretty satisfied so far? I hammered the **** out of Metra reps I know personally and the engineer I worked with trying to get this thing to market as an alternative to the Corksport and/or custom fabbing something so hopefully it's worked out okay. I finally got my own kit so in a few weeks I'll be able to finally ditch my disassembled and relocated oem radio once and for all. (yay!)

edit: They're all over Ebay by the way if anyone's having a hard time locating one.

Way2real316

Do you know if he is going to update all the ones he has? Was he aware of the problem? I just ordered mine Friday and i had no idea of the problems the ecu was having.

ferg

yes he said he will check for updates before ship and open it up, i just ordered mine few days ago

Way2real316

Good im over here sweating lol. I guess i need to check the board more.

ferg

[quote=Way2real316;2760584]Good im over here sweating lol. I guess i need to check the board more.[/did you order it from ebay?

Way2real316

[QUOTE=ferg;2760588]Yea i ordered from the same guy you ordered from. I just sent him a email five minutes ago.

ferg

yeah i did on saturday and it will be here on the 11th ill update you when its installed

rollerbldes

You guys will still need to update it again.. The final firmware is not public yet.

ferg

only the ones who having trubbles, just make sure the box that you have to update is easy to get to

Way2real316

They emailed me back and said it was updated with version 1.1. What is Metra's website i cant find it for sshhh

ferg

http://metraonline.com/

J_Owens

just got an email for version 1.4 and will most likely be the final version.

"Gentlemen,



This is release 1.4, which I’m fairly sure will be the last one. I am still watching the clock, so it is not yet posted to the web. We did manage to find the cause of the “blinky” problem, and that is corrected. FWIW, it was only occurring when the lights were on and the dimmer was turned down – we were spending too much time processing the incoming PWM."

rollerbldes

Again just for those who don't understand 1.4 is for private testing only. You guys will have to wait a bit longer.

And also again, 1.1 fixes critical A/C indicator and freezing issue. However the time runs fast and the custom text display is slightly glitchy.


On a second note.. My volume down steering wheel button doesn't work anymore. All the other ones do though. I wonder how my volume down button changed resistance.

Switch

iTrader: (1)

hey owens, ur down in SJ right. i live in redwood city. u think it would be possible for u to update my unit or allowing me to borrow ur cable? i could return the favor with some brew or if u need a deal on skis or a snowboard i got u covered ( i work at any mountain)

raphy3

For those with heated seats: do both heated seat buttons light up when you turn on your lights, or just the driver's button? yesterday I noticed only my driver's seat button lights up when my lights are on. The other one still actually heats the seat and the light that tells you it's working comes on, but the little symbol showing the heated seat doesn't light up.
I'm trying to figure out if I blew a fuse or something while installing my kit. I haven't noticed any other problems, so I figure it could be normal.

Way2real316

Sweet i can live with the time and text glitch well they work out the update.

J_Owens

Hey switch yeah I am in downtown SJ and sure ill update it for you for some brew lol, do you have a laptop? if so bring it with you, i dont have one so i been updating it at my work, let me know via on here or pm.

also i am going to re solder my a/c heat control unit today i will let you guys know if it fixes my a/c heat problem

J_Owens

if you dont have a laptop you could always come to my job and i can update it at my job switch.

rollerbldes

Aw I wish someone in OC could hook me up with something for an update. Haha oh well.

J_Owens

roller you dont have the cable? you are getting the current updates emailed to you tho right? i thought you were updating as well as me.

Just updated to 1.4 going to solder today, if all goes well i will prob start sending the cable around after i hook up switch, roller i can send to you if you like, i thought you already had the cable and was getting current updates like i was

Jedi54

iTrader: (7)

I sense sarcasm in Rollerblade....

FastRX8

When I first installed my Metra kit, it was fine for a couple days.
Then the clock started going fast, and once in a while I would get the Matrix looking display.
I took everything out to change some stuff and re-wire the carpc, and now the clock runs fine, but AC display does not change.
Everything works correctly, but the display does not change.
I know others have had the same issue.

Anyways, I can live with it for now, and once the final version is done, I'll try to find someone to update it for me.

FastRX8

I think he is.
Maybe he let someone borrow his cable. I know he had it cause I was planning on
attending their meet to get mine updated once it's finalized.