Metra kit is out
#101
1% evil, 99% hot gas.
iTrader: (21)
Rotary Power
Looks like the display might be 12 characters, which is just enough to say ROTARY POWER! ![Ylsuper](https://www.rx8club.com/images/smilies/ylsuper.gif)
I'm definitely getting on of these so I can put Rotary Rasp's CarPC display in the dash.
![Ylsuper](https://www.rx8club.com/images/smilies/ylsuper.gif)
I'm definitely getting on of these so I can put Rotary Rasp's CarPC display in the dash.
#103
Registered User
Join Date: Oct 2003
Location: Indianapolis, IN
Posts: 468
Likes: 0
Received 0 Likes
on
0 Posts
Well, I got mine today (the double din High Gloss version) and I have to say, the paint job is pretty rough.
Im going to see if I can fix it with some 2000 grit sandpaper and some polishing compound...
Everything else looks pretty good though... so ill get some pics up soon!
![Banghead](https://www.rx8club.com/images/smilies/banghead.gif)
Everything else looks pretty good though... so ill get some pics up soon!
#104
User and Abuser
iTrader: (3)
![Eyetwitch](https://www.rx8club.com/images/smilies/eyetwitch.gif)
EDIT: And post up some pics of this roughness...
Last edited by firebirdude; 10-09-2008 at 02:44 PM.
#106
i got my kit today as well and i would have to agree with flyboyindy...the paint job is a great disappointment...especially compared to the factory radio's black finish. I wet sanded with 800 grit and am currently painting winning blue.
as for the question about which head to go with (dnx8120 or the avic d3) go with the dnx8120 if you have the money. if you want to save a little bit of money, it is actually cheaper to go with the ddx812. it is the exact same receiver minus the nav and if you want the nav, you can add the kna-g510 and still be cheaper than the dnx8120.....this is the route that i went and i love it!
as for the question about which head to go with (dnx8120 or the avic d3) go with the dnx8120 if you have the money. if you want to save a little bit of money, it is actually cheaper to go with the ddx812. it is the exact same receiver minus the nav and if you want the nav, you can add the kna-g510 and still be cheaper than the dnx8120.....this is the route that i went and i love it!
Last edited by seifer51582; 10-09-2008 at 02:50 PM.
#107
Never Blend In
iTrader: (2)
Well, I got mine today (the double din High Gloss version) and I have to say, the paint job is pretty rough.
Im going to see if I can fix it with some 2000 grit sandpaper and some polishing compound...
Everything else looks pretty good though... so ill get some pics up soon!
![Banghead](https://www.rx8club.com/images/smilies/banghead.gif)
Everything else looks pretty good though... so ill get some pics up soon!
#108
Administrator
iTrader: (7)
oh boy, this isn't sounding good.
1st batch and people are having to paint them???
1st batch and people are having to paint them???
#110
i am painting mine because i did the same with the factory radio face in my car originally so i want it to look the same. as far as the mold goes....it is a solid piece. the problem almost looks like they were not painted in a booth and dirt and dust came in contact with the wet clear coat (yes...at least they used base clear as opposed to a single stage). I have already wet sanded mine down so i cannot post pictures of exactly what i am talking about.
the color looks like it is a bit off too. almost like it is more of a grey color than the piano black that it is supposed to be.
all and all, i cannot complain because it is significantly cheaper than the corksport kit, it looks better than the corksport kit, and you still have the option to program the dash display so all and all i would have to give it 4 and a half out of 5 stars.
btw.....i am sure that the ones who purchased the hg kit that are not wanting to color change, will be fine to just wet sand with some 2000 grit and polish with some compund and microfiber.
the color looks like it is a bit off too. almost like it is more of a grey color than the piano black that it is supposed to be.
all and all, i cannot complain because it is significantly cheaper than the corksport kit, it looks better than the corksport kit, and you still have the option to program the dash display so all and all i would have to give it 4 and a half out of 5 stars.
btw.....i am sure that the ones who purchased the hg kit that are not wanting to color change, will be fine to just wet sand with some 2000 grit and polish with some compund and microfiber.
#113
Registered User
Join Date: Oct 2003
Location: Indianapolis, IN
Posts: 468
Likes: 0
Received 0 Likes
on
0 Posts
Nah...painting isnt necessary, they really just needed to spend a little more time on wetsanding... its coming out really good! Im going to go over it one more time and then ill be ready to take a few pics....
They were probably just rushing a bit to get it out quickly.. Anyways...back to the polishing =)
They were probably just rushing a bit to get it out quickly.. Anyways...back to the polishing =)
#115
yeah, you will need to run an swix from pac if you are wanting the steering wheel controls. this is the universal module that can be programmed for any radio with an ir eye and remote control. otherwise you will have to purchase one of the brand specific steering wheel control modules from pac.
#117
Mulligan User
iTrader: (1)
Nah...painting isnt necessary, they really just needed to spend a little more time on wetsanding... its coming out really good! Im going to go over it one more time and then ill be ready to take a few pics....
They were probably just rushing a bit to get it out quickly.. Anyways...back to the polishing =)
They were probably just rushing a bit to get it out quickly.. Anyways...back to the polishing =)
early adapters will always run into production teething issues like this, regardless how many times it was delayed lol
![Spank](https://www.rx8club.com/images/smilies/spank.gif)
#118
Registered User
Join Date: Oct 2003
Location: Indianapolis, IN
Posts: 468
Likes: 0
Received 0 Likes
on
0 Posts
Well, the pics dont do it justice, but I was able to get an almost perfect match by wet sanding with 2000 grit sandpaper, and then using Turtle Wax Premium rubbing compound, then Polishing Compound, then a coat of wax...
Now I guess I should install the damned thing...lol
![](http://www.indyrx8club.com/metra1.jpg)
Now I guess I should install the damned thing...lol
![](http://www.indyrx8club.com/metra1.jpg)
![](http://www.indyrx8club.com/metra2.jpg)
#120
Ninja Name: Shimojikushi
iTrader: (2)
Join Date: Jun 2007
Location: Hacienda Heights, CA
Posts: 263
Likes: 0
Received 0 Likes
on
0 Posts
UH UH UH....OMG....i need to change my pants
cant believe this thing is finally out....as far as repainting it thats no problem...i didnt mind the wait...and i dont want to pay twice as much for the corksport
cant believe this thing is finally out....as far as repainting it thats no problem...i didnt mind the wait...and i dont want to pay twice as much for the corksport
#122
Registered User
Join Date: Oct 2003
Location: Indianapolis, IN
Posts: 468
Likes: 0
Received 0 Likes
on
0 Posts
Nope.. those are my ac controls...
As far as the 3000 grit, you might want to be a bit more agressive, as the clearcoat was truly ****.... but use whatever you want...
As far as posting... the next pics you will see will be when its finished... Im getting the whole "get this **** out of my kitchen" from the other half! lol
Im just so excited... everything (besides the paint) is so perfect! The harness and axxess module is simply plug n play... just a few wires to connect!
I should have more to post tonight!
As far as the 3000 grit, you might want to be a bit more agressive, as the clearcoat was truly ****.... but use whatever you want...
As far as posting... the next pics you will see will be when its finished... Im getting the whole "get this **** out of my kitchen" from the other half! lol
Im just so excited... everything (besides the paint) is so perfect! The harness and axxess module is simply plug n play... just a few wires to connect!
I should have more to post tonight!
#123
Administrator
iTrader: (7)
#124
User and Abuser
iTrader: (3)
yeah, you will need to run an swix from pac if you are wanting the steering wheel controls. this is the universal module that can be programmed for any radio with an ir eye and remote control. otherwise you will have to purchase one of the brand specific steering wheel control modules from pac.
![Aroused](https://www.rx8club.com/images/smilies/aroused.gif)