Notices

Need remote on for amp

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 01-13-2006 | 09:26 PM
  #1  
bengraves's Avatar
Thread Starter
Registered User
 
Joined: Oct 2005
Posts: 12
Likes: 0
Need remote on for amp

I am going to install a powered bazooka tube in my 8 and need to find a switched wire to turn the amp on and off. Can I get some help?
Old 01-13-2006 | 09:44 PM
  #2  
StealthTL's Avatar
Metatron
iTrader: (1)
 
Joined: Mar 2003
Posts: 7,284
Likes: 175
From: A Pacific Island.
Post On.....

If the tube is in the trunk (duh!), you can snake a wire under the console to the rear lighter socket, it's switched.

S
Old 01-13-2006 | 09:57 PM
  #3  
bengraves's Avatar
Thread Starter
Registered User
 
Joined: Oct 2005
Posts: 12
Likes: 0
Nice - thank you -
Old 11-05-2006 | 09:47 PM
  #4  
dshiznit1489's Avatar
Formerly Polak Graphics
 
Joined: Aug 2006
Posts: 1,855
Likes: 0
From: New Jersey
why would you buy a bazooka in the 1st place?
Old 11-06-2006 | 08:59 AM
  #5  
jstkilntim's Avatar
resU deretsigeR
 
Joined: Jan 2006
Posts: 743
Likes: 0
From: Jacksonville, FL
Originally Posted by StealthTL
If the tube is in the trunk (duh!), you can snake a wire under the console to the rear lighter socket, it's switched.

S
Old 11-06-2006 | 01:18 PM
  #6  
tomf's Avatar
Registered
 
Joined: Sep 2006
Posts: 10
Likes: 0
not sure about this, but I was looking to buy an infinity basslink and their installation manual claims that if you use the speaker level inputs rather than line level (RCA) you do not need a remote turn on signal. It says the amp can sense the audio signal and turn on automatically. your bazooka might have the same thing?
Old 11-06-2006 | 05:00 PM
  #7  
jstkilntim's Avatar
resU deretsigeR
 
Joined: Jan 2006
Posts: 743
Likes: 0
From: Jacksonville, FL
Originally Posted by tomf
not sure about this, but I was looking to buy an infinity basslink and their installation manual claims that if you use the speaker level inputs rather than line level (RCA) you do not need a remote turn on signal. It says the amp can sense the audio signal and turn on automatically. your bazooka might have the same thing?
This is a great function, but you sometimes get nuisance "on & off's" during low volumes. If this happens, you will need to run the remote 12V.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
cliffkemp
Series I Trouble Shooting
7
10-04-2015 12:11 AM
Learners_Permit
Series I Interior, Audio, and Electronics
8
09-27-2015 08:38 PM
juicemantwon
New Member Forum
3
09-26-2015 01:30 PM
just1jack
New Member Forum
3
09-09-2015 05:45 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -5. The time now is 07:16 AM.