SR roll bar
#1
Registered User
Thread Starter
Join Date: Dec 2003
Location: baltimore
Posts: 305
Likes: 0
Received 0 Likes
on
0 Posts
SR roll bar
I was jsut browsing today and i ran into the SR roll bar it says TBA on price and pics ... But i was wondering if anyone knows when about it is coming out and ... any pics or if any other company makes it thanks
Shane
http://www.srmotorsports.com/RX8_Per...ior_Parts.html
Shane
http://www.srmotorsports.com/RX8_Per...ior_Parts.html
#4
He's as bad as Can
I found the same link 2/2005 no updates since then. The only “ bolt in “ bar I have found is made by a company called Auto Power. http://www.upgrademotoring.com/safet...utopwr_app.htm the one I am interested in is the Street Sport with goes for $420.
![](http://www.sendersnj.com/rx8/Mike/rx8club/AutopwrStrt-SprtBar.jpg)
![](http://www.sendersnj.com/rx8/Mike/rx8club/AutopwrStrt-SprtBar.jpg)
Last edited by expo1; 09-01-2008 at 05:07 PM.
#6
He's as bad as Can
Originally Posted by DARKMAZ8
Actually I believe mazdaspeed makes a weld in one.
Pricey and you have to remove Air-Bags
#8
Captain Spaulding
Join Date: Aug 2003
Location: black bear country - NJ
Posts: 223
Likes: 0
Received 0 Likes
on
0 Posts
check out this site under vividracing.com - http://www.vividracing.com/catalog/i...ath=17_18_2537.
There are 2 different cages, a 4 point bolt in and a 6 point bolt in cage, both made by AutoPower.
There are 2 different cages, a 4 point bolt in and a 6 point bolt in cage, both made by AutoPower.
#9
He's as bad as Can
Before you buy anything wait till the Search function is fixed and do a lookup on other members dealings with Vivid Racing, that’s all I will say.
FYI, there is an Auto Power distributor listed in Garfield, NJ http://www.stable-energies.com/home.asp
FYI, there is an Auto Power distributor listed in Garfield, NJ http://www.stable-energies.com/home.asp
#14
He's as bad as Can
I think you can just find the fuse and pull the plug? In the photo above of the Mazda roll-bar you can see the area of the side bags right behind the bar. The bags don’t know the bar is there. Should they deploy in a roll-bar equipped car something will have to give and there is quite a bit of power behind a deploying air bag. All info indicates the Mazda bar is not designed for street use.
#15
zoom-zoom
iTrader: (1)
I just came across the Vivid Racing links to the AutoPower cages. Has anyone tried to bolt one of these in yet?
Any comments on where exactly it attaches, how many holes you need to drill through what, how hard it is to get in and out (the driver and the bar), and how functional the rest of the car is with it in (e.g., do you lose the back seats?).
Any comments on where exactly it attaches, how many holes you need to drill through what, how hard it is to get in and out (the driver and the bar), and how functional the rest of the car is with it in (e.g., do you lose the back seats?).
#16
He's as bad as Can
Would not be that much different than the install shown here
http://www.sandmracing.com/srollbar.html
It bolts to the car in four places, to the floor and to the wheel wells (inside) will need to remove the tires and part of the interior.
http://www.sandmracing.com/srollbar.html
It bolts to the car in four places, to the floor and to the wheel wells (inside) will need to remove the tires and part of the interior.
Thread
Thread Starter
Forum
Replies
Last Post
hufflepuff
Series I Wheels, Tires, Brakes & Suspension
6
05-30-2016 10:45 AM
duworm
Series I Wheels, Tires, Brakes & Suspension
1
10-01-2015 04:57 PM