voltage / current / resistor question
#1
voltage / current / resistor question
voltage equals current time resistance
V = I R
so i am going to get some LEDs for interior lighting that are
1.7vdc to 2.2 vdc
car voltage is 14 vdc to 12 vdc
so
(14vdc - 1.95vdc) / .035 = 344.3 ohms
??
V = I R
so i am going to get some LEDs for interior lighting that are
1.7vdc to 2.2 vdc
car voltage is 14 vdc to 12 vdc
so
(14vdc - 1.95vdc) / .035 = 344.3 ohms
??
#3
let's look at my shopping list...
interior dome light, front(2) and back(2), and passanger foot well (2)
10 red LEDs 2200mcd, 5mm, clear, 45 degree, 1.7-2.2 vcd, 20ma
exterior mirrors bottom, going to tap the door light, so they'll come on when i hit the remote
2 yellow, 1200mcd, 5mm, clear, 45 degree, 1.7-2.2 vcd, 20ma
Misc
1/2 watt, flame proof 10 ohm resistors
1/2 watt, flame proof 330 ohm resistors
was going to get diodes but give up finding them
interior dome light, front(2) and back(2), and passanger foot well (2)
10 red LEDs 2200mcd, 5mm, clear, 45 degree, 1.7-2.2 vcd, 20ma
exterior mirrors bottom, going to tap the door light, so they'll come on when i hit the remote
2 yellow, 1200mcd, 5mm, clear, 45 degree, 1.7-2.2 vcd, 20ma
Misc
1/2 watt, flame proof 10 ohm resistors
1/2 watt, flame proof 330 ohm resistors
was going to get diodes but give up finding them
#4
let's look at my shopping list...
interior dome light, front(2) and back(2), and passanger foot well (2)
10 red LEDs 2200mcd, 5mm, clear, 45 degree, 1.7-2.2 vcd, 20ma
exterior mirrors bottom, going to tap the door light, so they'll come on when i hit the remote
2 yellow, 1200mcd, 5mm, clear, 45 degree, 1.7-2.2 vcd, 20ma
Misc
1/2 watt, flame proof 10 ohm resistors
1/2 watt, flame proof 330 ohm resistors
was going to get diodes but give up finding them
interior dome light, front(2) and back(2), and passanger foot well (2)
10 red LEDs 2200mcd, 5mm, clear, 45 degree, 1.7-2.2 vcd, 20ma
exterior mirrors bottom, going to tap the door light, so they'll come on when i hit the remote
2 yellow, 1200mcd, 5mm, clear, 45 degree, 1.7-2.2 vcd, 20ma
Misc
1/2 watt, flame proof 10 ohm resistors
1/2 watt, flame proof 330 ohm resistors
was going to get diodes but give up finding them
#5
Registered User
Join Date: Aug 2003
Location: New Mexico
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
Good place to get parts such as diodes are:
Digi-Key.com
Or if you are a student, you can try to get samples from:
fairchildsemi.com
lite-on.com.tw
There are other LED manufacturers out there who might give you samples depending on the field of work you are in.
Hope this helps.
Digi-Key.com
Or if you are a student, you can try to get samples from:
fairchildsemi.com
lite-on.com.tw
There are other LED manufacturers out there who might give you samples depending on the field of work you are in.
Hope this helps.
#6
thanks man
i'll keep the links but from partsexpress.com
the bill comes out to be 10 bucks plus shipping
note to others:
LEDs are not as expensive as people might think!
i'll keep the links but from partsexpress.com
the bill comes out to be 10 bucks plus shipping
note to others:
LEDs are not as expensive as people might think!
#7
Ricer is Nicer.....
![Cool](https://www.rx8club.com/images/icons/icon6.gif)
Just bought 50 of the little b*ggers off ebay, for the footwell project......
12,000mcd.......SHOULD be bright enough......
Not very good with the cut&paste stuff, but the item # was 2550748679......also explains why I bought 50, when the lot size was 25......hit the 'buy now' button twice!.....DOH!
.
.
.
doc
12,000mcd.......SHOULD be bright enough......
Not very good with the cut&paste stuff, but the item # was 2550748679......also explains why I bought 50, when the lot size was 25......hit the 'buy now' button twice!.....DOH!
.
.
.
doc
#9
Ricer is Nicer.....
![Cool](https://www.rx8club.com/images/icons/icon6.gif)
I think your math is fine - 330 Ohms will be perfect.
You should consider bundling a few together, since they are so small, and the mirror is a long way from the ground.....
Keep us posted!
.
.
.
doc
You should consider bundling a few together, since they are so small, and the mirror is a long way from the ground.....
Keep us posted!
.
.
.
doc
Thread
Thread Starter
Forum
Replies
Last Post
Rupanrx
Series I Aftermarket Performance Modifications
1
09-04-2015 06:44 AM