Notices

XM Commander Install Trouble

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 05-02-2004 | 11:47 PM
  #1  
dwo2000's Avatar
Thread Starter
Registered User
 
Joined: Mar 2004
Posts: 5
Likes: 0
From: Baton Rouge
XM Commander Install Trouble

After following many posts on dismantling the console, removing the ashtray, searching forever and then finally finding the elusive 10mm bolt, then springing the head unit from the clips in dash, I thought I was home free.

But I am stuck as I can not get the A/C control connector free. Using a mirror I convinced myself that the bottomside of the connector has the tab (can anyone confirm this?).

So I did as I had done previously and squeezed and squeezed on the bottomend of the connector but don't seem to be moving the tab down (or in this case up) enough to allow me to pull it free.

Any suggestions or tricks. Special tools?

Thanks in advance

dwo2000
Baton Rouge
Old 05-03-2004 | 12:28 AM
  #2  
WHealy's Avatar
Mr. Blue Man
 
Joined: Dec 2003
Posts: 887
Likes: 0
From: Carmel, IN
I've hasd mine out a half dosen times. I always used a very small (like 2 mm wide) standard screw driver. My memory is all the "hooks" are on top but without removing it again to check, i can't confirm. But there's always one or two that always cause me to think "am I sure I'm relasing this correctly.

Good luck
Old 05-03-2004 | 02:43 AM
  #3  
thew's Avatar
Thews8
 
Joined: Apr 2004
Posts: 2,534
Likes: 9
From: Oregon South Coast
hey Whealy where did you find the blue paint for your Calipers ?

nice Sig gif btw and your avitar is great!
Old 05-04-2004 | 09:57 PM
  #4  
dwo2000's Avatar
Thread Starter
Registered User
 
Joined: Mar 2004
Posts: 5
Likes: 0
From: Baton Rouge
I was about to go after it again (XM Commander install) when I saw a post about Sirius availability in the "Summer". Called the dealer. Still not in their most recent parts summary for the RX-8. Parts guy at the local dealer says it is compatible with stock head unit. That would really be sweet and allow what I prefer which is non-aftermarket look. But I was not so confident the Parts guy was giving good accurate info. Sounded like an opinon. More to come as he said he would call dealer services to get update on the Sirius POS option.
Old 05-05-2004 | 06:37 AM
  #5  
RAM's Avatar
RAM
Registered User
 
Joined: Dec 2003
Posts: 92
Likes: 0
From: Orando, Florida
I have been trying to get information about the Sirius option since it was announced in February but no one seems to know about the backwards compatibility. Hope you have luck finding out something.
Old 05-05-2004 | 07:33 PM
  #6  
dwo2000's Avatar
Thread Starter
Registered User
 
Joined: Mar 2004
Posts: 5
Likes: 0
From: Baton Rouge
Got a call back from the local dealer on Sirius availability. Unfortunately nothing new. Parts guy called regional dealer services for Mazda. Sirius is now available for the Tribute. No news on RX-8. I sent a message via mymazda.com asking for update. Unfortunately no response. Please post any new info you may have gathered from your local dealer.
Old 05-09-2004 | 03:16 PM
  #7  
cerveza27's Avatar
Registered User
 
Joined: Apr 2004
Posts: 19
Likes: 0
From: Los Angeles, CA
Someone else said the Sirius for the Tribute is 900 retail, selling for 750 at the dealers. No way I'm paying 750 for that. Plus I like XM better than sirius anyway.
Old 05-09-2004 | 03:22 PM
  #8  
RAM's Avatar
RAM
Registered User
 
Joined: Dec 2003
Posts: 92
Likes: 0
From: Orando, Florida
2005 Tribute Accessories

Satellite Radio Receiver Kit 2005 Tribute

Suggested Retail: 924.70
Our Price : 740.00
You Save : 184.70

SIRIUS, Mazda part # 0000-81-G01
Old 05-10-2004 | 10:25 PM
  #9  
dwo2000's Avatar
Thread Starter
Registered User
 
Joined: Mar 2004
Posts: 5
Likes: 0
From: Baton Rouge
Jesus, that is expensive for Sirius option for Tribute. And likely that is in the ballpark for the RX-8 unit when it becomes available. I was prepared for $400 but at $750-$900, I may backtrack to the XM Commander unit. I guess I will stand down until midsummer and see what happens. I would prefer the fully integrated solution that uses the existing display, but may have to be practical. But, the slick XM Commander installations that you can find in this forum teach that a nice look can be had by those interested in taking the extra time during installation.
Old 05-28-2004 | 02:20 PM
  #10  
RAM's Avatar
RAM
Registered User
 
Joined: Dec 2003
Posts: 92
Likes: 0
From: Orando, Florida
FYI update: Price change in record time.
This is the price for the TRIBUTE version.
They must have read dwo2000's price point.

Suggested Retail: 399.00
Our Price : 320.00
You Save : 79.00
Quantity :

SIRIUS, Mazda part # 0000-81-G01
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Carbon8
RX-8's For Sale/Wanted
42
02-27-2020 08:39 AM
JimmyBlack
Series I Major Horsepower Upgrades
273
02-10-2020 10:23 PM
yurcivicsux
Series I Major Horsepower Upgrades
192
09-12-2017 10:54 PM
projectr13b
Series I Do It Yourself Forum
1
09-06-2015 01:04 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: XM Commander Install Trouble



All times are GMT -5. The time now is 04:19 PM.